• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.225-230
• /
• 2009

We propose a template matching method for component inspection of SMD assembly system. To discriminate wrong assembled components, the input image of component is matched with its standard image by template matching algorithm. For a fast inspection system, the calculation time of matching algorithm should be reduced. Since the standard images of all components located in a PCB are stored in computer, it is desirable to reduce the memory size of standard image. We apply the discrete wavelet transformation to reduce the image size as well as the calculation time. Only 7% memory of the BMP image is used to discriminate goodness or badness of components assembly. Comparative results are presented to verify the usefulness of the proposed method.

• 한국분무공학회지
• /
• 제27권1호
• /
• pp.26-35
• /
• 2022

Electrospray is a method of atomizing fluid using high voltage supply and capable of generating continuous flow and coherent size of droplets. Electrical system and properties of fluids has enabled electrospray to have various spray modes. However, its studies have been confined only in Cone jet, which is more stable and easier to manipulate droplets' size than other spraying modes. Therefore, it is necessary to investigate and compare other spraying modes based on experimental parameters and physical properties of fluids. This research paper identified nine different spray modes. It was found out that Sauter Mean Diameter (SMD) is proportional to flow rate of fluids and maximum difference among spray modes was 1.7 times. On the other hand, SMD standard deviation had low variations on specific flow rates of fluids. Pulsed jet mode recorded the largest SMD standard deviation, while Spindle recorded the lowest.

• 한국의류산업학회지
• /
• 제7권6호
• /
• pp.601-608
• /
• 2005

This research investigated the present state of the dress forms used by clothing manufacturers and proposed procedure to bring out the standardized body type and figure for women in twenties. The result of questionnaire showed chief pattern maker's thoughts that dress form should be differently made for each age group and should be more reflected the standard body than the idea body. The standardized body type was made from the standardized posture and size which were analyzed from the interquartile range(IQR) of 314 subjects. The standardized size could be verified as for the balanced body shape of twenties through making the standard dress form. The standardized form(S form) was compared with three kinds of forms(A, K and P) for investigating the suitability of forms. K form was very similar to S form, Educational P form and manufacturer's A form had quite big differences from S form at the important areas for making clothing. The side shapes of A, K and P forms showed differences at back bending, neck angle and hip shape from S form. A form was comparatively smooth and flat. This results could be used as the practical standard to improve the suitability of size and shape in the dress forms of manufacturers and educators.

• 조명전기설비학회논문지
• /
• 제20권4호
• /
• pp.107-116
• /
• 2006

접지도체의 굵기를 결정하는 국외 규격은 재료의 특성값인 물리적 정수까지 적용하여 광범위하게 적용할 수 있는 반면 수식이 복잡한 문제점이 있고 JIS와 국내규격은 수식은 간단하나 제약조건이 많은 문제점이 있다. 또한 접지도체의 접속방법에 따라 최대허용온도가 다르게 적용되므로 접지도체 굵기 산정 방식이 복잡하고 적용 방법이 상이하여 시공현장에서 엔지니어들이 적용하는데 많은 어려움이 있다. 따라서 본 논문에서는 수식제어 모델링을 이용한 새로운 접지도체 굵기 산정방식과 접속방법에 따른 접지도체 굵기 산정 간이식을 제시하고 타당성을 입증, 분석하였으며 사례연구를 통해 논문의 신뢰성을 검증하였다.

• 한국농촌건축학회논문집
• /
• 제15권1호
• /
• pp.81-88
• /
• 2013

The recently built rural Hanoks have shown changes in appearances regarding its shape, space and size in the traditional floor plan. This is probably the transformation process to suit the needs of modern residence as new spaces and other factors are considered these days. The purpose of the research is to provide basic data for the innovation and construction of future Hankoks by analyzing the size features of the Hanoks in the rural areas of Jeeollanam-do and changing trends. They were divided into 5 types depending on the shape and the spacing of the living room and kitchen. Then size features per each type were analyzed. From this, it was revealed that there needs to be reasonable development of types in the standard design of Hanok because the size of the rooms is actually bigger than the standard design of Hanok in Jeollanam-do. The composition of the utility rooms should be classified as either domestic space or agricultural workspace considering that this area is rural but there are not enough storage spaces for agricultural machines and materials in most houses as they did not install external storage spaces. Therefore, it was analyzed that the size varies with the changes in the composition of space because of Hankok's similarities in the area of the rooms with typical apartments.

• 대한인간공학회지
• /
• 제33권5호
• /
• pp.337-354
• /
• 2014

Objective: The purpose of this study was to examine the various sizing systems and specified anthropometric data as well as the fit issues used today. Background: A standard sizing system for clothes is a system that is developed based on body shape and size classifications method. To develop an efficient sizing system, we have to classify the database from the majority of the samples. Method: The method of this paper deals with the secular trend of height spanning from 1997 to 2010 along with the morphological feature patterns for Koreans. It also investigates the comparison of the growth pattern between male and female and the body shape classification according to the drop values based on the anthropometric data samples of KATS taken from the 2010 surveys in order to develop and define the new guidelines for the size designation systems of clothes. Results: The results are classified with body size and shape categories according to the drop values by age and sex in order to develop the new guidelines for the size designation systems based on these body dimensions from the analyzed anthropometric database. Conclusion: These new guidelines for the size designation system will eliminate the confusion that currently exists among countries and individual apparel designers. Application: The adopted standards could be used to compare the sizing systems worldwide.

• 복식
• /
• 제42권
• /
• pp.127-136
• /
• 1999

This study purport to establish the size was flexibly receptive to consumers. Sample size was 6555 women in their 20's and 29 variables from the diret anthropometric data were applied to analyze. The preliminary survey was taken from Febraury 10. 1997 to May 23 1997 and the measurement was done from April 14, 1997 to June 10. 1997. Follwing the KS regulations Hanbok were given 3cm intervals each for the bust and hip girth and cm for th height. Size system was presented for the usage of developing the pattern of hanbok by analyzing the result of the regression coefficient and referring to the distribution chart of the back length and the neck to ulnar styloid length. When establishing the standard size for the ready-made Hanbok like Western style clothes it's convenient for both consumer and producer to present both bust girth and height. To enhance the fitting of Chogori we used the flatness ratio of bust as the reference for grouping styles of body. in the case of Chima-\ulcorner해갸 4 brackets are developed. First step was bust girth 78cm height 15cm second was bust girth 5852cm5 height 160cm third was bust girth 82cm height 165cm fourth was bust girth 88cm height 16cm.

• 한국수산과학회지
• /
• 제29권3호
• /
• pp.386-392
• /
• 1996

A numerical method based on genetic algorithms was introduced to characterize the grain-size distribution more effectively. This technique was proved significant particularly for multimodal size distributions, as was verified for samples from Korea Strait continental shelf. Sediment samples collected from the Korea Strait continental shelf revealed that $96\%$ of the grain-size distributions were multimodal. Therefore, the use of grain-size parameters was not the ideal method. As an alternative method, the decomposition of sue curves into elementary normal component curves was used. Means and standard deviations of 593 decomposed normal components were calculated by a numerical method from 268 size curves of Korea Strait sediments. The mean values of decomposed normal components showed peaks at $1\~3\phi\;and\;7\~9\phi$ size classes. The plot of mean and standard deviation values of the coarse fraction normal components on the map showed a characteristic areal distribution. The characteristic distribution was found to derive from underlying Pleistocene sediment on the basis of sea bottom geologic distribution of the area. The method of decomposition into normal components was found to be more effective than the analysis using traditional grain-size parameters in investigation of multimodal size distribution of Korea Strait shelf sediment.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.265-271
• /
• 1996

This study was conducted to investigate distribution of lead particles by operation of industry, to evaluate the effect of particle size on the absorption to workers, and to recommend the Occupational Health Standard for lead. Total lead concentrations in the secondary smelting industry were higher than those in the battery and litharge manufacturing industry. Total lead concentrations in other industries except radiator manufacturing industry exceeded the standard of $50{\mu}g/m^3$. Only radiator manufacturing industry indicated lead concentrations significantly lower than those in other industries(p<0.05). Average blood lead level of workers was $85.1{\mu}g/dl$ in secondary smelting manufacturing, $51.3{\mu}g/dl$ in the battery manufacturing, and below $40{\mu}g/dl$ in the litharge and radiator manufacturing industry. Blood lead levels of workers by industry were significantly different(p<0.05). From relationship between airborne lead concentrations by size and lead in blood, confidence limits of airborne lead concentration equivalent to $40{\mu}g/dl$ of permissible limit in blood, was $147.9-489.8{\mu}g/m^3$ as total lead and $28.8-79.4{\mu}g/m^3$ as ACGIH-RPM. It is recommended that two separate occupational health standards for lead should be established by particle size. Airborne concentration of $150{\mu}g/m^3$ as fatal lead dust and $30{\mu}g/m^3$ as respirable lead dust was recommended.

• 패션비즈니스
• /
• 제12권2호
• /
• pp.87-99
• /
• 2008

This study aims to classify lower trunk body types of Chinese men in their middle age (30s and 40s) and suggest the standard for them to design slacks pattern. Mollison's relation deviations were used to analyze the direct measurement items in this research compared to those of Size Korea 2004. Though Korean middle-aged men were higher in most items than Chinese counterparts, all items except mid-thigh circumference and side hip length were merely within the range of ${\pm}1\sigma$. According to the results of size classification by absolute values, factor analysis extracted to 2 factors(horizontal size of lower body and vertical size of lower body), and cluster analysis brought about 3 types(type1: tall and thin trunk (36.9%), type 2 : normal height and thick trunk(45.5%), and type 3 : short and normal trunk(17.6%) with some significant differences among them. Also, the results of shape classification by index values, they were extracted 4 factors (waist-hip flatness, waist-hip cross section, vertical waist-groin and hip-surface length) by factor analysis and revealed 3 types(type 1: different waist-hip width, thick, long waist, long upper hip, and short hip-surface length(27.8%), type 2 : different waist-hip width, flat, short upper hip, high hip and groin, and average hip-surface length(29.4%), and type 3: small waist-hip width, thick, average upper hip, and short hip-surface length (42.8%)) with significant differences among them by cluster analysis. The results of standard body types by shape-size combination, 19subjects(10.16%) under these values are regarded as standard body types. Significance was not seen in all items in the t-test results between the total group and the standard group. The latter had lower variation coefficients and smaller individual differences than the former. However, in-depth research is required for generalization since this research is limited to a small number of subjects in Ningbo of Zhejiang.