• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.792-795
• /
• 1996

In TIG welding of pipe, back bead size monitoring is important for weld quality assurance. Many researches have been performed on estimation of the back bead size by heat conduction analysis. However numerical conduction model based on many uncertain thermal parameters causes remarkable errors and thermomechanical phenomena in molten pool can not be considered. In this paper, filler wire feeding force in addition to weld current, wire feedrate, torch travel speed and orbital position angle is monitored to estimate back bead size in orbital TIG welding. Monitored welding process variables are fed into an artificial neural network estimator which has been trained with the monitored process variables (input patterns) and actual back bead size (output patterns). Experimental verification of the proposed estimation method was performed. The predicted results are in a good agreement with the actual back bead shape. The results are quite promising in that estimation of invisible back bead shape can be achieved by analyzing the welding parameters without any conventional NDT of welds.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.111-114
• /
• 2016

In HEVC, motion estimation is performed independently for each variable block size. So it requires several times of search window data, and also it is difficult to exploit early termination. In this paper, a new method is proposed to exploit search window data and early termination in variable block size. When applied to TZS algorithm, it reduces pixel comparison and search window data accesses to 1/3.7 ~ 1/2.9 with negligible image quality degradation.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.193-206
• /
• 2022

Several algorithms for nuclear power plant (NPP) break event detection, isolation, localization, and size estimation are proposed. A break event can be promptly detected and isolated after its occurrence by simultaneously monitoring changes in the sensing readings and by employing an interquartile range-based isolation scheme. By considering the multi-sensor data block of a break to be rank-one, it can be located as the position whose lead field vector is most orthogonal to the noise subspace of that data block using the Multiple Signal Classification (MUSIC) algorithm. Owing to the flexibility of deep neural networks in selecting the best regression model for the available data, we can estimate the break size using multiple-sensor recordings of the break regardless of the sensor types. The efficacy of the proposed algorithms was evaluated using the data generated by Maanshan NPP simulator. The experimental results demonstrated that the MUSIC method could distinguish two near breaks. However, if the two breaks were close and of small sizes, the MUSIC method might wrongly locate them. The break sizes estimated by the proposed deep learning model were close to their actual values, but relative errors of more than 8% were seen while estimating small breaks' sizes.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.13-19
• /
• 2010

In this paper, we study a new estimation system for the prediction of steam generator tube defects. In the previous research works, defect size estimators were independently designed for each defect types in order to estimate the defect size. As a result, the structure of estimation system is rather complex and the estimation performance gets worse if the classification performance is degraded for some reason. This paper studies a new estimation system that does not require the classification of defect types. Although the previous works are expected to achieve much better estimation performance than the proposed system since it uses the estimator specialized in each defect, the performance difference is not so large. Therefore, it is expected that the proposed estimator can be effectively used for the case where the defect type classification is imperfect.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.130-139
• /
• 2021

In this study, size of the fruit of Japanese apricot (plum) was estimated through a plum recognition and size estimation program using 3D images in order to control the Eurytoma maslovskii that causes the most damage to plum in a timely manner. In 2018, night shooting was carried out using a Kinect 2.0 Camera. For night shooting in 2019, a RealSense Depth Camera D415 was used. Based on the acquired images, a plum recognition and estimation program consisting of four stages of image preprocessing, sizeable plum extraction, RGB and depth image matching and plum size estimation was implemented using MATLAB R2018a. The results obtained by running the program on 10 images produced an average plum recognition error rate of 61.9%, an average plum recognition error rate of 0.5% and an average size measurement error rate of 3.6%. The continued development of these plum recognition and size estimation programs is expected to enable accurate fruit size monitoring in the future and the development of timely control systems for Eurytoma maslovskii.

• Journal of Welding and Joining
• /
• v.17 no.3
• /
• pp.26-35
• /
• 1999

On the laser weld production line, a slight alteration of the welding condition changes the bead size and the strength of the weldment. The measurement system is produced by using three photo-diodes for detection of the plasma and spatter signal in $CO_2$ laser welding. The relationship between the sensor signals of plasma or spatter and the bead shape, and the mechanism of the plasma and spatter were analyzed for the bead size estimation. The penetration depth and the bead width were estimated using the multiple regression analysis.

• Journal of Korean Society for Quality Management
• /
• v.22 no.3
• /
• pp.85-98
• /
• 1994

In current coordinate measuring machine practice, there are no commonly accepted sample sizes for estimating form errors which have a statistical confidence. Practically, sample size planning is important for the geometrical tolerance inspection using a coordinate measuring machine. We determine and validate appropriate sample sizes for form error estimation. Also, we develop form error estimation methods with certain confidence levels based on the obtained sample sizes in various form errors: straightness, flatness, circularity, and cylindericity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.162-167
• /
• 2015

In this paper, we propose a F-MBE algorithm for Dual mode seeker (CCD and IIR). The MBE algorithm show improved performance at the IIR target size estimation. but the MBE can't use at Dual Mode seeker. To overcome this problem,, we apply template matching method for CCD target size information. The performance of proposed F-MBE method is tested at target intercept scenario of dual mode seeker equipped missile. The experiment results show that the proposed algorithm has the relatively improved performance.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.7-10
• /
• 2000

Fast block motion estimation technique is proposed to reduce the computational complexity in video coding. In the conventional methods the size of search region is fixed. For small motion regions like background the small size of sea of search region is enough to find a block motion. But for active motion regions the large size of search region is preferred to figure out the accurate motion vector. Therefore, it is reasonable that a block motion is estimated in the variable search region (both the size and the position of it). That is to say, the search region varies according to the predicted motion characteristics of a block. The block motion in video frames has temporal continuity and then the search region of a current block is predicted using the block motion of previous blocks. The computational complexity of the proposed technique is significantly reduced with a good picture quality compared to the conventional methods.

• Korean Journal of Agricultural Science
• /
• v.23 no.2
• /
• pp.261-271
• /
• 1996

Korean government has pursued measure of promoting specialized full time farmers, one hundred fifty thousand by 2001, along with "New Agricultural Policy" begining since year 1993, so as to improve agricultural structure depressed by urbanization and industrialization and also under pressure for agricultural imports liberlization. Objective of the study was to estimate optimal farming size for selected cash crops and livestocks aimed at farm income of more than fifty million won at the year 2001. Estimated items were eighteen fann models of four area for cash crops and nine models of three kind livestocks. Optimal fann size was estimated from the data collected through ninety nine fann household survey for farming result in 1993. and developed computer model on changing farm size estimation related on price change. Those results is espected to utilize as basic reference for promoting specialized full time farmers proposed by the New Agricultural Policy.