• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.178-186
• /
• 2009

The quality control is needed to ensure the accuracy of medical information and achieved by evaluating the performance of and maintaining the system and practicing various measurements and evaluations. The Korean Institute for Accreditation of Medical Image, therefore, have held educational program for quality control of special medical equipments. The major of programs participants, however, are radiology specialists with only small number of radiological technologists from some hospitals, furthermore, the follow-up education and the share of information between participants and non-participants are insufficient in general, thus, the knowledge level of radiological technologists, regardless of their participation, is relatively low. This study carried out the questionnaire research for the 500 radiological technologists registered in Korean Society of MRI Technology, on the basis of 2008, and performed analysis for five months from May to Oct., 2008. The questionnaires were delivered by post to each radiological technologists and the response rate was 36%(n=180). The results of this revealed that the 86.7% of respondents felt the necessity of inspection on quality management, while only the 27.8% completed the educational program for manager of special medical equipment. and only the half(53.9%) had the knowledge about inspection on quality management. The completion of educational program had no correlations with sex, age, size of occupying hospital, the number of radiological technologists in occupying site and MRI laboratory, career year of general radiologist and in MRI laboratory, and the presence of biomedical engineering department in occupying hospital. The 78.0% of participants at the educational program for quality management held by the Korean Institute for Accreditation of Medical Image had the knowledge about inspection on quality management(p<.05) whereas the 43.9% of the hospitals held such program and the 54.4% of radiological technologists from those hospitals had related knowledge, which indicated that such programs held by hospitals had not effects on the knowledge level of radiological technologists. This indicates also that the contents, methods, and other conditional factors of educational programs are important for the outcome of them.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.367-375
• /
• 1990

In order to determine the effects of bedrock, organic matter, calcium and iron oxide on the soil aggregation, this research has performed with soils from bedrock regions of Limestone, Granite and Granite gneiss. This research was also to estimate how organic matter, calcium and iron oxide influence on soil aggregation under different forest conditions in various bedrock regions. And it also had a purpose to rate physical factors relevant to soil aggregation, their characteristics and aggregate diameter which closely relates to stabilities in the process of soil erosion. The following conclusions have been drawn in response to the overall research objectives. The rates of the soil aggregation on different bedrock regions were 21% in Limestone bedrock, 19.8% in Granite bedrock and 9.9% in Granite gneiss bedrock. A main factor in soil aggregation was the orgainc matter content in soils and the rate of soil aggregation increased in the constant proportion with the organic matter content. The relation could be formulated into Y=4.31X-4.37(Y : aggregation ratio X : organic matter content). The soil aggregation ratio under the deciduous forests eras higher than that under the coniferous forests. It was considered that this resulted from differences in organic matter content. Soil aggregates with larger diameter than 0.5mm were found more in Limestone bedrock than other smaller size soil aggregates of 0.25mm diameter were more distributed in Granite gneiss bedrock. Granite bedrock region had normal distribution in soil aggregate sizes with the highest frequency of 0.5mm diameter. Calcium and iron oxides had only partial influences on the soil aggregation in some specific conditions. But in Limestone bedrock region calcium influenced on the soil aggregation with the organic matter content.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.43-54
• /
• 2001

Genetic differentiation of populations is resulted from the environmental and the genetic effects, and the interactions between them. Whereas, the major factors influencing to the genetic differentiation within populations are the gene flow induced by seed or pollen dispersial, the microsite heterogeneity, and the density-dependent distribution of individuals. For the purpose of studying spatial genetic structure and the distribution pattern of Korean pines(Pinus koraiensis), we set up one $100{\times}100m$ plot at a Korean pine stand in Quercus mongolica community on Mt. Jumbong in Korea. To estimate the coefficient of spatial autocorrelation as Moran's index and an analogue, simple block distance, isozyme markers were analyzed in 325 Korean pines. For 11 polymorphic loci observed in 9 enzyme systems, the average percentage of polymorphic loci, the observed and expected heterozygocity were 72.2% 0.200, and 0.251, respectively. It was revealed the excess of homozygotes was observed in the plot, which suggests that here may be more number of consanguineous trees than expected. On the basis of isozyme genotypes observed in this study, 325 trees were classified into 147 groups in which the maximum number of trees for one group was 34. From the distance class of 24-32m, the genetic heterogeneity began to increase. The variation of simple block distance against the growth performance by tree height and diameter also showed the same trend at 24~32m class. According to high fixation index(F=0.204), the spatial genetic structure within a stand, the analysis of the growth performance, and the distribution patterns of identical genotypes, we inferred that the genetic structure of a Korean pine stand in Mt. Jumbong has been maintained rather density-dependent mechanism than the gene flow, such as the pollen dispersial or the heavy input of seeds following the forest gaps. The genetic patchy size was determined between 24~32m, which suggests that the selection of individuals for the ex situ conservation of Korean pine in Mt. Jumbong may be desirable to be made with the spatial distance over 37 meters between trees.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.46-55
• /
• 2016

This work proposes a 13b 100MS/s 45nm CMOS ADC with a high dynamic performance for IF-domain high-speed signal processing systems based on a four-step pipeline architecture to optimize operating specifications. The SHA employs a wideband high-speed sampling network properly to process high-frequency input signals exceeding a sampling frequency. The SHA and MDACs adopt a two-stage amplifier with a gain-boosting technique to obtain the required high DC gain and the wide signal-swing range, while the amplifier and bias circuits use the same unit-size devices repeatedly to minimize device mismatch. Furthermore, a separate analog power supply voltage for on-chip current and voltage references minimizes performance degradation caused by the undesired noise and interference from adjacent functional blocks during high-speed operation. The proposed ADC occupies an active die area of $0.70mm^2$, based on various process-insensitive layout techniques to minimize the physical process imperfection effects. The prototype ADC in a 45nm CMOS demonstrates a measured DNL and INL within 0.77LSB and 1.57LSB, with a maximum SNDR and SFDR of 64.2dB and 78.4dB at 100MS/s, respectively. The ADC is implemented with long-channel devices rather than minimum channel-length devices available in this CMOS technology to process a wide input range of $2.0V_{PP}$ for the required system and to obtain a high dynamic performance at IF-domain input signal bands. The ADC consumes 425.0mW with a single analog voltage of 2.5V and two digital voltages of 2.5V and 1.1V.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.4
• /
• pp.347-370
• /
• 2011

Slurry type shield would be very effective for the tunnelling in a sandy ground, when the slurry pressure would be properly adjusted. Low slurry pressure could cause a tunnel face failure or a ground settlement in front of the tunnel face. Thus, the stability of tunnel face could be maintained by applying an excess slurry pressure that is larger than the active earth pressure. However, the slurry pressure should increase properly because an excessively high slurry pressure could cause the slurry flow out or the passive failure of the frontal ground. It is possible to apply the high slurry pressure without passive failure if a horizontal impermeable layer is located in the ground in front of the tunnel face, but its location, size, and effects are not clearly known yet. In this research, two-dimensional model tests were carried out in order to find out the effect of a horizontal impermeable layer for the slurry shield tunnelling in a saturated sandy ground. In tests slurry pressure was increased until the slurry flowed out of the ground surface or the ground fails. Location and dimension of the impermeable layer were varied. As results, the maximum and the excess slurry pressure in sandy ground were linearly proportional to the cover depth. Larger slurry pressure could be applied to increase the stability of the tunnel face when the impermeable layer was located in the ground above the crown in front of the tunnel face. The most effective length of the impermeable grouting layer was 1.0 ~ 1.5D, and the location was 1.0D above the crown level. The safety factor could be suggested as the ratio of the maximum slurry pressure to the active earth pressure at the tunnel face. It could also be suggested that the slurry pressure in the magnitude of 3.5 ~4.0 times larger than the active earth pressure at the initial tunnel face could be applied if the impermeable layer was constructed at the optimal location.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.171-178
• /
• 2017

The purpose of this study is to investigate the effect of number of times dipped in coloring liquid and sintering temperature on the flexural strength of zirconia ceramic. In this study, using a zirconia block having improved transparency, specimens with size of $25mm{\times}2mm{\times}1.5mm$ were fabricated. The zirconia ceramic specimens were divided into three groups according to the number of times dipped in coloring liquid by 0, 2 and 4 times, and dyed in the coloring liquid to give color to each specimen. Then, after sintering them at the final temperature of $1,450^{\circ}C$ and $1,600^{\circ}C$, flexural strength was measured using a universal testing machine (total 6 group, n=10 for each group). Also, a scanning electron microscopy (SEM) was performed to observe its microstructure, and the data obtained through the experiment were analyzed with two-way ANOVA. The results of the flexural strength analysis show that the highest value was measured $762.3{\pm}42.3MPa$ in EKL2 group, while the lowest value was $516.4{\pm}77.1MPa$ in EKH4 group. According to the results of the two-way ANOVAs, flexural strength was not related with interaction between sintering temperature and number of times dipped in coloring liquid ($R^2=0.737$). However, there were statistically significant differences in flexural strength depending on sintering temperature (P<0.001). The flexural strength of zirconia ceramics having improved transparency was dependent on sintering temperature. The number of times dipped in the coloring liquid did not affect flexural strength of the zirconia ceramic having improved transparency.

• Journal of agriculture & life science
• /
• v.45 no.1
• /
• pp.59-66
• /
• 2011

This study was conducted to investigate the effect of vase material and floral preservative treatment over time on flower color, leaf color and flower size of cut flowers Rosa hybrida 'Aqua' and 'Corvernet', and Gerbera jamesonii 'Honeymoon' and 'Golden Time' stuck in a glass, porcelain, or onggi (pottery with a dark bronze glaze) vase containing either tap water or a floral preservative solution. The ${\Delta}E$ values in flower color of 'Aqua' rose at 8 days after treatment with a floral preservative in onggi and porcelain vases were low. The ${\Delta}E$ value of 'Covernet' rose treated with floral preservative in an onggi vase was the lowest and L value was the closest to that of petals of cut flowers at just before treatment (control). The ${\Delta}E$ value of 'Honeymoon' gerbera treated with a floral preservative in an onggi vase was the lowest and a value of 58.81 and b value of 34.29 were the closest to that of the control group as color of cut flowers in an onggi vase was similar to the color at the beginning of treatment. The ${\Delta}E$ value of 'Golden Time' gerbera treated in an onggi vase was significantly lower than that in a porcelain or glass vase and a value of -7.81 treated with a floral preservative solution in an onggi vase was the closest to the control and b value was high in an onggi vase as well. The L, a, and b values in leaf color of roses were similar to each value of the control and ${\Delta}E$ value of 3.25 measured in an onggi vase was lower than that in a porcelain or glass vase. Flower diameter of 'Covernet' and 'Golden Time' roses treated with a floral preservative in an onggi vase was greater than that in other treatments. From these results, the floral preservative applied to a holding solution is assumed to improve the quality and freshness of cut roses and gerberas by inhibiting microbes propagation and by promoting uptake of water and nutrients. The onggi vase with fine pores will promote the expression and maintenance of flower and leaf colors and may increase flower diameter by high air permeability.

• Journal of health informatics and statistics
• /
• v.43 no.4
• /
• pp.307-317
• /
• 2018

Objectives: This study aimed to verify the effectiveness of Internet-based intervention programs for adults with diabetes by conducting a meta-analysis of studies conducted since 2000. Methods: We conducted a systematic review of research papers published in domestic and overseas journals from January 2000 to December 2015, and selected 9 papers that met the analysis criteria. Data analysis was performed using the open source statistical software R 3.5.0, to analyze the effectiveness of Internet-based interventions on experimental and control groups. Results: The analysis showed that intervention programs for controlling HbA1c levels in adult patients with diabetes most commonly comprised 7 sessions on Internet-based management (77.8%), and the most common frequency of application of intervention programs was 4 session in 6 months (33.4%). The present meta-analysis revealed statistically significant effects of Internet-based intervention activities (SMD = 0.92, 95% CI 0.45-1.40). The analysis of the effect size according to the intervention period showed that the 3-month, 6-month, and 12-month interventions reported in eight studies (89%) had a high effect on the Internet-based intervention group. Conclusions: The results of this study confirm the effectiveness of Internet-based intervention programs for adult patients with diabetes. The need for research on the utilization of Internet-based intervention programs for the steady management of diabetes, a chronic disease; for the development of specific guidelines for intervention activities; and for establishing appropriate protocols are acknowledged.

• Journal of the Korean Magnetics Society
• /
• v.16 no.5
• /
• pp.255-260
• /
• 2006

The basic composition of Ni-Zn ferrite was $(Ni_{0.35}Cu_{0.2}Zn_{0.45})_{1.02}(Fe_2O_3)_{0.98}$ (group A) and $(Ni_{0.4}Cu_{0.2}Zn_{0.4})_{1.02}(Fe_2O_3)_{0.98}$(group B) with additional 0.1 mol% $CaCO_3$ and 0.03 mol% $V_2O_5$. For high permeability and acceleration of grain growth, $CaCO_3$ and $V_2O_5$ was added. The mixture of the law materials was calcinated at $600^{\circ}C$ for 2 hours and then milled. The compacts of toroidal type were sintered at different temperature ($1,050^{\circ}C,\;1,070^{\circ}C,\;1,100^{\circ}C$) for 2 hours in air followed by an air cooling. Then, effects of various composition and sintering temperatures on the microstructure and physical properties such as density, resistivity, magnetic induction, coercive force, initial permeability, quality factor, and curie temperature of the Ni-Zn ferrite were investigated. The density of the Ni-Zn ferrite was $4.90{\sim}5.10g/cm^3$, resistivity revealed $10^8{\sim}10^{12}{\Omega}-cm$. The average grain size increased with the increase of sintering temperatures. The magnetic properties obtained from the aforementioned Ni-Zn ferrite specimens were 4,000 gauss for the maximum induction, 0.25 oersted for the coercive force, 2,997 for the initial permeability, 208 for the quality factor, and $202^{\circ}C$ for the curie temperature. The physical properties indicated that the specimens could be utilized as the core of microwave communication and high permeability deflection yoke of high permeability.

• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.378-383
• /
• 2018

This study was carried out to investigate the optimum cultivation distance for high yielding cultivation of the new variety of Gomchwi in highland and lowland. The test material was used 'Sammany' variety and the area was cultivated with a highland of 750 m above sea level and a lowland of 20 m above sea level. The planting distance was 5 treatments of $20{\times}20cm$, $20{\times}30cm$, $30{\times}30cm$, $35{\times}40cm$ and $40{\times}40cm$, and the plant was cultivated at 35% shading net in the open field. The annual growth of 'Sammany' variety was higher in the highland than in the lowland, but the number of leaves was higher in the lowland than that in the highland. The leaf number per plant was the highest in the $40{\times}40cm$ plot and the more the planting distance was, the more tendency was. However, the leaf weight per plant was higher in the highland than in the lowland. The number of leaves per 10a were higher in the lowland than that of highland and the tendency was more as the planting distance was narrower. Yields were slightly higher in the highland than that of lowland and the highest treatment plot was 2,983 kg/10a in $20{\times}20cm$. In the second year, the growth was high in the highland, and the highland was high in the leaf number and leaf weight and the same tendency in the yields. Among the planting distances, Yields in both areas were the highest in the $20{\times}20cm$ treatment, with 3,369 kg/10a in lowland and 7,257 kg/10a in highland. The growth of the third year was slightly better in the highland than that of the lowland but the difference was not significant. However, the number of leaves and leaf weight per plant were higher in the lowland than that of highland. And, in terms of leaf number and yield per 10a, it was also higher in the lowland than that in the highland. The narrower the planting distance was increased yields, and the highest yield was 6,051 kg/10a in $20{\times}20cm$. The lowland was high in yield until the third year, but the highland was the highest in the second year and decreased slightly in the third year. The narrower the planting distance in the both areas, the higher the yield, and the leaf size tended to be small.