• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.171-179
• /
• 2016

This study analyzes guidelines to select optimum number of grids to represent behavior of a given water system appropriately. The EFDC model was chosen as a 3-D hydrodynamic and water quality model and salt was chosen as a surrogate variable of pollutant. The model is applied to an artificial canal that receives salt water from coastal area and fresh water from a river from respective gate according to previously developed gate operation rule. Grids are subdivided in vertical and horizontal (longitudinal) directions, respectively until no significant changes are found in salinity concentrations. The optimum grid size was determined by comparing errors in average salt concentrations between a test grid systems against the most complicated grid system. MSE (mean squared error) and MAE (mean absolute error) are used to compare errors. The CFL (Courant-Friedrichs-Lewy) number was used to determine the optimum number of grid systems for the study site though it can be used when explicit numerical method is applied only. This study suggests errors seem acceptable when both MSE and MAE are less than unity approximately.

• Journal of Convergence for Information Technology
• /
• v.9 no.2
• /
• pp.85-93
• /
• 2019

There is currently no recognized standard for the size of lifts. Each elevator manufacturer sets the maximum allowable floor area that meets the capacity calculation standard of the elevator using the maximum used car floor area, which is defined by EN-CODE and the domestic inspection standard, and determines the elevator size based on their own standards. In this paper, we propose a method to more easily determine the elevator size. To do this, we implemented a program that calculates the size of the elevator by inputting the dimensions of the hoistway. This program will be useful method for quick decision making and elevator installation considering the elevator factors according to the already determined hoistway size of the building and calculating the EN-CODE currently used and the size of the elevator according to domestic inspection standards.

• Journal of Welding and Joining
• /
• v.14 no.6
• /
• pp.37-47
• /
• 1996

An ultrasonic testing uses the directivity of the ultrasonic wave which propagates in one direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of ultrasonic wave is related to determination of testing sensitivity, scanning pitch and defect location. This paper investigated the directivity of ultrasonic wave, which scattered from slit defect located in heat-affected zone (HAZ) in butt joint using visualization method. The directivity of shear waves scattered from slit defect were different according to probe direction (far defect, near defect) and probe position (forward movement, maximum echo position, backward movement). The difference of directivity of reflection wave was existed between 2 MHz and 4 MHz angle probes. In the case of 2 MHz angle probe, the directivity of reflection wave was appeared sharp form because of the relation wave length and defect size.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.735-745
• /
• 2012

Storage method is one of major measures for reduction of CSOs pollutant loads and several projects have been done nationwide. But systematic analysis of intercepting capacity has not been studied to determine optimum size of storage facility. In this research, not only storage volume but also intercepting capacity which means flow capacity from intercepting facility to CSOs storage facility was studied and optimum sizing method for storage facility was proposed. The result shows that pollutants reduction efficiency can be increased significantly by increasing intercepting capacity and it might reduce storage volume and total construction costs. Intercepting capacity for the study area was evaluated and it was shown as equivalent to 83 % probability rainfall intensity.

• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.3-10
• /
• 2018

A projection-based active information display system was proposed. The proposed system is based on Intelligent Space and a steerable projector mounted mobile robot which is called Ubiquitous Display (UD). In order to transfer visual information for a human in the Intelligent Space, the UD projects a certain shape of an image with a fixed size. Due to redundancy of degree of freedom (DOF), there are lots of situations to project a same shape and size of the image on a surface. In this paper, we describe a method to determine a goal posture of the UD. Here, the goal posture is the most efficient position and orientation of the UD so as to project visual information and it is determined by the Intelligent Space. To verify the proposed method, simulation and demonstration are carried out.

• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.241-250
• /
• 2000

The feasibility of precision fertilizing for small size fields was studied by determining fertilizing amount of nitrogenous and calcareous to a cite specific region. A detailed soil survey at three experimental fields of $672m^2$, $300m^2$ and $140m^2$ revealed a considerable spatial variation of the pH and organic matter(OM) levels. Soil organic matter was measured using Walkley-Black method and soil pH was measured with a pH sensor. Soil sample was obtained by Grid Node Sampling Method. The soil sampling depth was 10∼20 cm from the soil surface. To display soil nutrient variation, a soil map was made using Geographic Information System (GIS) software. In soil mapping, soil data between nodes was interpolated using Inverse Distance Weighting (IDW) method. The variation was about 1∼1.8 in pH value and 1.4∼7% in OM content. Fertilizing Amount of nitrogenous and calcareous was determined by th fertilizing equation which was proposed by National Institute of Agricultural Science and Technology(NIAST). The variation of fertilizing amount was about 3∼11 kg/10a in nitrogenous and 70∼140 kg/10a in calcareous. The results showed a feasibility of precision fertilizing for small size fields.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.738-745
• /
• 2012

Aircraft battle damage repair(ABDR) is emergency repair method for the damaged aircraft in battle field. The main purpose of the ABDR is to increase the readiness of fighter aircraft during wartime. While many studies have been conducted to develop ABDR method, few efforts have focused on evaluation of damage and determination of the size of hole caused by enemy's anti-aircraft artillery attack. The aim of this study is essentially to quantify damage of aircraft wing attacked by anti-aircraft artillery. The computer simulations was performed to accomplish this goal. A number of simulations have been carried out to compare size of damages under various attack conditions. In conclusion, it was revealed that the size of damage varied depending on the type and direction of cannonball. Furthermore, in this paper, the proper path sizes are suggested for different damage conditions.

• The Korean Journal of Applied Statistics
• /
• v.25 no.5
• /
• pp.733-741
• /
• 2012

The successful launch of Arirang satellites allow the acquisition of high resolution satellite imagery of Korean territory and enables the transition from the conventional cultivation area survey method to new image based methods adopted in advanced nations. In this study, we suggested reasonable sizes of the primary sampling unit and the secondary sampling unit for the satellite imagery based sampling design in 8 provinces preselected for this research. The PSU size was determined mainly in consideration of intracorrelation that shows the degree of homogeneity within each cluster and the efficiency of the image process. For the SSU size, we considered the relative standard error and the differences between the land cover maps produced by the Ministry of Environment and the satellite imagery processed by the National Statistical Office.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.242-247
• /
• 2012

In the determination of suitable frame sizes associated with dynamic framed slotted Aloha used in radio frequency identification tag identification processes, the widely imposed constraint $L=2^Q$ often yields inappropriate values deviating far from the optimal values, while a straightforward use of the estimated optimal frame sizes causes frequent restarts of read procedures, both resulting in long identification delays. Taking a trade-off, in this paper, we propose a new method for determining effective frame sizes where the effective frame size changes in a multiple of a predetermined step size, namely ${\Delta}$. Through computer simulations, we show that the proposed scheme works fairly well in terms of identification delay.

• Journal of the Korean Chemical Society
• /
• v.67 no.4
• /
• pp.217-221
• /
• 2023

A series of hydrophobic dodecyl-terminated 6th-generation poly(amidoamine) dendrimer (H)-encapsulated cadmium sulfide ((CdS)_n@H) nanoparticles in a co-solvent (toluene: methanol = 6.8: 3.2 v/v) are synthesized. The diameters of CdS nanoparticles within the dendrimer were estimated by analyzing the positions of the first excitonic absorption peaks of CdS in UV-vis spectra. The size of the CdS nanoparticle within the dendrimer shows a saturation value as the CdS/H ratio (n) increases, which is believed to be due to the limited physical size of the void cavity within the dendrimer. This simple and convenient method of estimating the saturation of the size of CdS in dendrimers may be useful in determining the maximum void space within other dendrimers under various solvent conditions.