• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.123-134
• /
• 1999

There are several models for process quality assurance by quality system (ISO 9000), process capability analysis, acceptance control chart and so on. When a high level process capability has been achieved, it takes a long time to monitor the process shift, so it is sometimes necessary to develop a quicker monitoring system. To achieve a quicker quality assurance model for high-reliability process, this paper presents a model for process quality assurance when the fraction nonconforming is very small. We design an acceptance control chart based on variable quality characteristic and time-censored accelerated testing. The distribution of the characteristics is assumed to be normal or lognormal with a location parameter of the distribution that is a linear function of a stress. The design parameters are sample size, control limits and sample proportions allocated to low stress. These paramaters are obtained under minimization of the relative variance of the MLE of location parameter subject to APL and RPL constraints.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.205-209
• /
• 1997

One objective of the u control chart is to detect changes of mean nonconformities per unit occurred owing to various causes. This paper shows the detection probability using the Poisson distribution for various parameters, that is, subsample size n, mean nonconformities per unit $u_o$, and $u_o's$ change ratio k. We find that (1) as $u_o$ increases the smaller n is required for the same detection probability and the same change ratio; (2) as k gets away from 1 the smaller n is required; (3) the bigger n is required for the bigger detection probability. Several tables are given from our findings and are hoped to be used as guidelines for u chart users.

• 품질경영학회지
• /
• 제30권4호
• /
• pp.1-14
• /
• 2002

Traditional SPC techniques are looking out variation of process by fixed sampling interval and fixed sample size about every hour, the process of in-control or out-of-control couldn't be detected actually when the sample points are plotted near control limits, and it takes no notice of expense concerned with such sample points. In this paper, to overcome that, consider VSI(variable sampling interval) EWMA control charts which VSI method is applied. The VSI control charts use a short sampling internal if previous sample points are plotted near control limits, then the process has high probability of out-of-control. But it uses a long sampling interval if they are plotted near centerline of the control chart, since process has high possibility of in-control. And then a comparison and analysis between FSI(fixed sampling interval) and VSI EWMA in the statistical aspect and economic aspect is studied. Finally, we show that VSI EWMA control chart is more efficient than FSI EWMA control chart in the both aspects.

• 대한산업공학회지
• /
• 제25권4호
• /
• pp.448-458
• /
• 1999

This paper proposes sequential control charts with an upper bound on sample size. Existing sequential control charts have no restriction on the number of observations at a sampling point. For situations where sampling and testing an item is time-consuming or expensive, sequential control charts may not be directly applied. When the number of observations in a sampling point reaches the upper bound and there is no out-of-control signal, the proposed cumulative sequential control chart defers the decision to the next sampling point of which starting value is the value of the current statistic. Two Markov chains, inner and outer chains, are used to derive the formulas for evaluating the performance of the proposed chart. It is compared with $\bar{X}$ and cumulative sum control charts with fixed and variable sample sizes. The fast initial response (FIR) feature is studied. Guidelines for the design of the proposed charts are also given.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.918-924
• /
• 2009

As the population of overweight and obese children is rising rapidly around the world, there are many researches on purchasing and wearing children's clothing and optimal sizes, but researches on obese children are still inadequate. This study was carried out on 192 obese children over 75% in BMI. The purpose of the study was to set up the optimal interval of sizing system using the loss function which would be a guide for obese children for selecting ready to wear of suitable size. Introducing a loss function, which reflects how much the purchasing desire changes according to the difference, we formulate the problem and suggest a procedure to determine the optimal standard sizes minimizing the loss. These results were as follows ; In size chart of top's, 4 sizes had been determined by a loss function, had covered more than 91.1% of all subjects. In size chart of bottom's, 5 sizes had been determined by a loss function, had covered more than 87.0% of all subjects.

• 한국의류학회지
• /
• 제39권1호
• /
• pp.147-160
• /
• 2015

This study suggests a detailed apparel sizing system for brands that target elderly men between the ages of 60 to 79 by studying body type differences of the age group based on data from 'The $5^{th}$ Korean Anthropometric survey'. Compared to middle aged men, elderly men body measurements appear to be smaller except in the midriff area, such as the natural waist circumference, waist circumference (omphalion), waist depth and waist depth (omphalion). The size chart in the study was established according to the KS size chart system with a size jump of 5cm in height, 5cm and 3cm in chest circumference, 2cm in waist circumference (omphalion) and 2cm in hip circumference. A total of 8 sizes were established with heights between 160cm and 170cm and chest measurements between 85cm to 100cm for casual tops. For suit tops, a total of 11 sizes were established with heights between 160cm and 170cm and chest measurements between 88cm to 100cm. For bottoms, detailed sizes were suggested by dividing basic and reference areas with 13 sizes between 84cm to 94cm in the waist circumference (omphalion) and between 90cm to 98cm in the hip circumference.

• 응용통계연구
• /
• 제30권5호
• /
• pp.647-663
• /
• 2017

와이블 분포는 제품의 물리적 특성을 잘 반영하고 고장률이 증가하거나 감소하는 경우 모두를 나타낼 수 있기 때문에 재품의 수명을 모델링할 때 가장 많이 사용되는 분포이다. 일반적으로 수명시험에서 표본의 모든 제품의 수명이 측정될 때까지 시험을 진행하는 것이 원칙이지만 여러 가지 시간적 또는 비용적인 제약으로 인해 시험을 중도절단 하는 경우가 빈번하게 발생한다. 이 논문에서는 제품의 수명 데이터가 와이블 분포를 따르고 제1형 우측중도절단된 경우 척도모수의 변화를 탐지하는 Weibull generalized likelihood ratio (GLR) 관리도 절차를 제안하였다. 모의실험을 실시하여 제안한 GLR 관리도와 기존에 제안된 두 가지 CUSUM 관리도의 성능을 average run length (ARL)을 이용하여 비교하였다. 그 결과 이 논문에서 제안한 GLR 관리도는 형상모수와 표본의 크기가 크고 중도절단율이 아주 높지 않은 경우 척도모수의 다양한 변화를 탐지하는데 효율적임을 알 수 있었다.

• 한국세라믹학회지
• /
• 제23권4호
• /
• pp.35-40
• /
• 1986

The production process of a fine size fraction of Korean kaolin by ball milling is studied in this paper by analyzing the size distribution the size distribution of products with the Rosin-rammle formular and the rate process of cumulative size fractions with Alyavdin-Chujyo's formular. The size distribution is found to be divided in three regions a coarser part influenced by feed size an intermediate part where the size distribution shows a clear straight line relationship on Rosin-Rammler chart and the finest part with the ultimate limit of fineness by ball milling. Alyavdin-Chujyo's relationship is found to be valid over a very wide range of milling conditions. For different feed sizes the Alyavdin-Chujyo's relationship gives a group of straight lines with a common intersection point which can be defined as the limiting point of the persistent component region.

• 한국토양비료학회지
• /
• 제35권2호
• /
• pp.77-86
• /
• 2002

삼각통을 포함하여 29개 토양통으로 분포되는 연초 경작지 67개 토양에 대하여 토양의 색 특성은 광학적 기기에 의해 측정되는 색차계 방법과 육안관찰에 의해 비색 평가되는 Munsell color chart 방법으로 비교되었고, 또한 토양의 화학성과의 상호관계가 검토되었다. 색차계로 측정한 토양의 색 특성 L, a 및 b 값은 Munsell color chart의 명도(V), 채도(C), 및 색상(H)과 밀접하게 관련되며 정량적 수치로 표현되었다. 토양 색 측정치의 표준편차는 2mm 체 통과시료보다 0.5mm 체 통과시료에서 적었다. 토양 색의 L, 및 b 값은 수분함량이 증가함에 따라 감소되는 경향이었으나 a 값은 수분함량의 변화에 따라 차이가 없이 비슷하였다. 그러나 풍건조건과 습윤조건(-10hPa)에서 측정된 토양의 L, a, b 값 각각의 상관계수는 r=0.90 이상으로 고도로 유의성 있는 정의 상관을 보였다. 따라서 토양 색의 측정은 일정한 수분 조건인 풍건토 0.5mm 체 통과시료에서 측정하는 것이 바람직할 것으로 생각되었다. 토양의 색 특성은 유기물함량, 양이온치환용량, 치환성 석회 및 고토 등과 유의성 있는 상관을 보였으며 특히 L 값은 유기물 함량과 가장 밀접한 관계를 보였다.

• 복식문화연구
• /
• 제5권3호
• /
• pp.176-183
• /
• 1997

To develop the bodice pattern of the master size of the established size chart which was suggested in the former studies, the wearing experiment was practiced. According to the result, developed pattern design in this study boys\` bodily characteristics were reflected fully. And especially, New pattern design method was suggested at chest circumference, neck circumference, arm circumference, chest breadth, and center front line. The study results were put into the database in order to apply apparel CAD system, and they could be easily used in standardization work of design pattern.