• 산업기술연구
• /
• 제21권B호
• /
• pp.149-153
• /
• 2001

A study on the particle growth in $TEOS/O_2$ plasma was performed, and particle size and its distribution was measured by the electrical aerosol analyzer (EAA), light scattering particle size analyzer and the particle size was also determined by SEM. The effects of process variables such as total gas flow rate, reactor pressure, supplied power and initial reactant concentration on the particle growth were investigated. From the EAA results, the particle size distribution is divided into three groups of the cluster size and the small and large size particles. The particle size distribution measured by the light scattering particle size analyzer becomes bimodal, because the cluster size particles smaller than 20 nm in diameter cannot be detected by the light scattering particle size analyzer. The size of particles measured by the light scattering particle size analyzer is in good agreements with those by the SEM. Also we could understand that the particle formation is very sensitive to the changes of reactor pressure and reactant concentration. As the total gas flow rate increases, the particle size decreases because of the shorter residence time. As the reactor pressure, or the reactant concentration increases, the particle concentration increases and the particles grow more quickly by the faster coagulation between particles.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.104-109
• /
• 2001

The time to measure the size distribution using Condensation Nuclei Counter(CNC) and Differential Mobility Analyzer(DMA) can be shortened by classifying particles ramping the DMA voltage exponentially and continuously. In measurement, particles sampled at different time are mixed together going through sampling tube and CNC. Because the size distribution is inversed by using detector responses to sampling time intervals in this accelerated method, the mixing effects give inversion errors to the size distribution. The mixing effects can be considered by appling the transfer function with mixing effects to the data inversion. The inversion considering this effects gives birth to the size distribution shifted to the opposite direction of the size scanning.

• 한국식품과학회지
• /
• 제25권5호
• /
• pp.541-545
• /
• 1993

Sieve shaker와 Elzone particle size analyzer에 의한 두 가지 방법으로 제분방법에 따른 입자크기를 조사하였다. 제분방법별로 제조한 쌀가루의 입도분포를 측정한 결과 입자크기는 제분방법에 따라 영향을 받았으며 표준망체를 이용한 Sieve shaker 방법보다 Elzone particle size analyzer를 사용한 방법이 정확도가 우수하였다. 입도분포를 측정한 결과 Pin mill의 경우 $200{\sim}270$mesh가 30.38%으로 가장 많았고 $60{\sim}500mesh$의 분포도를 가졌다. Colloid mill은 $140{\sim}200mesh$가 가장 많았으며, $40{\sim}500mesh$의 분포도를 가졌다. Micro mill은 500mesh 이상이 41.62%로 가장 많았고 $140{\sim}500mesh$의 분포도를 보여주었다. Jet mill은 500 mesh 이상의 분포도로 입자크기가 가장 미세하였다. 또한 미세한 입자일수록 L간과 a값이 증가하였다. 쌀가루의 집합체를 살펴본 결과 습식제분은 분리된 쌀가루의 집합체형태로 구성되어 있고 건식제분은 분활된 조직체로 구성되었다. 전자주사현미경은 Elzone particle size analyzer 방법과 같은 입자분포도를 나타내었고 제분방법에 따라 구조의 특성을 보여주었다.

• 한국가시화정보학회지
• /
• 제17권3호
• /
• pp.19-23
• /
• 2019

The purpose of this research is to develop a facile measurement system for colorimetric analysis for zinc powder and size analyzer for zeolite particles in order to reduce the process time for their characteristic analysis. We present facile smartphone-based analysis methods to measure and estimate the size of zinc power by using colorimeteric method and the size of zeolite particles by using ImageJ program which is an open-source program. The results show a possibility of our methods to replace the previous professional analysis processes with them.

• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.33-43
• /
• 2014

A differential mobility analyzer (DMA) has been widely used as a standard tool for classifying nanoparticles with a certain size. More recently, several new types of DMA have been tested in an attempt to produce size-monodisperse nanoparticles. It is a bit surprise to see how simple the working theory of the DMA is. Although the theory was demonstrated quite successful, no one can guarantee whether the theory still works in another geometry of the DMA. In this regard, we first investigated the validity of the theory under various working conditions and then moved to check the validity upon minor change in its design. For the valid test, we compared the results with those obtained from a computational fluid dynamics.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권2호
• /
• pp.39-44
• /
• 2004

The present paper gives a review of the recent development of a differential mobility analyzer (DMA) available for both particle size measurements and production of monodisperse particles in the nanometer range. Operating principles of a general DMA are introduced as well as characteristics of highly functional DMAs such as those capable of classifying particles in a measurement range as broad as 1-1000nm at low pressures. Some examples of DMA applications are also described.

• 공업화학
• /
• 제18권1호
• /
• pp.41-47
• /
• 2007

Wyler법으로 제조된 구리프탈로시아닌(Cupc)을 kneader, attritor, SC-mill 및 acid pasting법으로 미분쇄하여 입자 크기, 모양, 결정구조를 비교하였다. Cupc 표준물질은 산업적으로 우수한 acid pasting, kneader법으로 제조하여 사용하였고, attritor, SC-mill로 분쇄한 후, 입도분석기, 전자현미경(SEM), X-선 회절스펙트럼(XRD)으로 입자특성을 분석하여 상호 비교하였다. SC-mill의 경우, 분쇄시간에 따라 입도분석기와 전자현미경으로 측정하였을 때, 90 min간의 분쇄시간 까지는 입자크기가 감소하였으나 그 이후부터는 Cupc의 강한 응집으로 평균입자크기가 증가하였다. Attritor로부터 건식 분쇄한 Cupc는 강한 응집에 의해 입도분석기로 입자크기를 측정할 수 없었지만, XRD peak intensity로부터 최적분쇄시간을 간접적으로 예측할 수 있었다.

• 대한지리학회지
• /
• 제48권6호
• /
• pp.819-836
• /
• 2013

본 연구는 백령도 사곶 사빈에서 채취한 사질 시료를 대상으로 레이저 회절 입도분석기를 이용한 입도분석에 있어서 전처리 및 굴절율과 흡수율의 영향을 비교하고, 사질 시료의 적절한 입도분석 절차 및 방법을 제시하고자 한다. 본 연구에 적용된 세 가지 전처리 방법에 따라 입도분석 결과는 서로 큰 차이를 보이지 않지만, 과산화수소 처리를 했을 경우, 그렇지 않았을 때와 차이를 보이고 있어, 과산화수소 처리를 통해 유기물은 제거되어야 한다. 시료의 입도분석 결과는 굴절율 1.3과 흡수율 0.01 이하에서 다른 지수가 적용되었을 때와 차이를 보이고 있다. 이러한 차이는 세립질 시료에 비하면 그리 크지 않으며 따라서 굴절율과 흡수율도 사질 시료의 입도분석 결과에 큰 영향을 미치지 않는다. 그러나 굴절율 1.3과 흡수율 0.01 이하 이외의 다른 지수를 적용할 필요가 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.241-242
• /
• 2008

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1015-1018
• /
• 2003

As increasing the size and complexity of hard-ware and software system, more efficient design methodology has been developed. Especially design-reuse technique enables fast system development via integrating existing hardware and software. For this technique available hardware/software should be prepared as component-based parts, adaptable to various systems. This paper introduces a component-based VHDL analyzer allowing to be embedded in other applications, such as simulator, synthesis tool, or smart editor. VHDL analyzer parses VHDL description input, and performs lexical, syntactic, semantic checking, and finally generates intermediate-form data as the result. VHDL has full-features of object-oriented language such as data abstraction, inheritance, and polymorphism. To support these features special analysis algorithm and intermediate form is required. This paper summarizes practical issues on implementing high-performance/quality VHDL analyzer and provides its solution that is based on the intensive experience of VHDL analyzer development.