• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.2
• /
• pp.29-36
• /
• 1987

In most of the structural members with initial cracks, the strength tends to decrease as the member size increases. This phenomenon is known as size effect. Among the structural materials of glass, metal or concrete, etc., concrete represents the size effect even without initial crack. According to the previous size effect law, the concrete member of very large size can resist little stress. Actually, however, even the large size member can resist some stress if there is no initial notch. This means that the fracture mechanism of very small or very large size member follows strength criterion, but the medium size member follows non-linear fracture mechanics (NLFM). In this study, the empirical models which are derived based on nonlinear fracture mechanics are proposed according to the regression analysis with the existing test data of large size specimens for uni-axial compression test, splitting tensile test and shear test of reinforced concrete beams.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.55-63
• /
• 2019

This paper develops an algorithm to determine the batch size of the batch process in real time for improving production and efficient control of production system with multiple processes and batch processes. It is so important to find the batch size of the batch process, because the variability arising from the batch process in the production system affects the capacity of the production. Specifically, batch size could change system efficiency such as throughput, WIP (Work In Process) in production system, batch formation time and so on. In order to improve the system variability and productivity, real time batch size determined by considering the preparation time and batch formation time according to the number of operation of the batch process. The purpose of the study is to control the WIP by applying CONWIP production system method in the production line and implements an algorithm for a real time batch size decision in a batch process that requires long work preparation time and affects system efficiency. In order to verify the efficiency of the developed algorithm that determine the batch size in a real time, an existed production system with fixed the batch size will be implemented first and determines that batch size in real time considering WIP in queue and average lead time in the current system. To comparing the efficiency of a system with a fixed batch size and a system that determines a batch size in real time, the results are analyzed using three evaluation indexes of lead time, throughput, and average WIP of the queue.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.8
• /
• pp.815-821
• /
• 2009

Information processing in variable and noisy environments is usually accomplished by means of adaptive filters. Among various adaptive algorithms, Least Mean Square (LMS) has become the most popular for its robustness, good tracking capabilities and simplicity, both in terms of computational load and easiness of implementation. In practical application of the LMS algorithm, the most important key parameter is the Step Size. As is well known, if the Step Size is large, the convergence rate of the algorithm will be rapid, but the steady state mean square error (MSE) will increase. On the other hand, if the Step Size is small, the steady state MSE will be small, but the convergence rate will be slow. Many researches have been proposed to alleviate this drawback by using a variable Step Size. In this paper, a new variable Step Size LMS(VSSLMS) called Categorized VSSLMS (CVSSLMS) is proposed. CVSSLMS updates the Step Size by categorizing the current status of the gradient, hence significantly improves the convergence rate. The performance of the proposed algorithm was verified from the view point of convergence rate, Excessive Mean Square Error(EMSE), and complexity through experiments.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.181-190
• /
• 2006

This study was designed to investigate how the size perception of letters is influenced by its relation to the ground, visual angle, physical size, letter space and cognitive direction. As a stimulus, a word in the Numeral and Hangul respectively were used in Experiments I and II. Fifty four different configurations consisting of two grounds, three visual angles and nine physical sizes were used as test patterns in Experiment I, and one hundred and eight different configurations consisting of two ground, three directions, two letter spaces and nine physical sizes were used in Experiment II. Subjects were asked to make magnitude estimates for perceived size of test patterns in both Experiments I and II. The results imply that the ground and visual angle affected the perceived size of the Numeral as a focal figure. We found that in Experiment I, the perceived size of the focal letter was clearly underestimated when the rate of physical size was larger than the real size which was a hundred(as the size of standard stimulus), and it was overestimated when the rate of physical size was smaller than a hundred. It was found that the effect of Delboeuf illusion influenced the perceived size of letter. The result of Experiment II shows that the ground, physical size, letter space and the cognitive direction affected the perceived size of Hangul as a focal figure. These findings suggest that size illusion of letters is caused by the size relationship (contrast or assimilation) between a letter perceived as figure and its ground.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.5
• /
• pp.89-97
• /
• 2017

In this study, we evaluated effect of particle size on arsenic solid-state speciation and bioaccessibility in soils highly contaminated with arsenic from smelting and mining. Soils were partitioned into six particle size fractions ($2000-500{\mu}m$, $500-250{\mu}m$, $250-150{\mu}m$, $150-75{\mu}m$, $75-38{\mu}m$, <$38{\mu}m$), and arsenic solid-state speciation and bioaccessibility were characterized in each particle size fraction. Arsenic solid-state speciation was characterized via sequential extraction and XRD analysis, and arsenic bioaccessibility was evaluated by SBRC (Solubility Bioaccessibility Research Consortium) method. In smelter site soil, arsenic was mainly present as arsenic bound to amorphous iron oxides. Fine particle size fractions showed higher arsenic concentration, but lower arsenic bioaccessibility. On the other hand, arsenic in mine site soil showed highest concentration in largest particle size fraction ($2000-500{\mu}m$), while higher bioaccessibility was observed in smaller particle size fractions. Arsenic in mine site soil was mainly present as arsenolite ($As_2O_3$) phase, which seemed to affect the distribution of arsenic and arsenic bioaccessibility in different particle size fractions of the mine soil.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.6
• /
• pp.475-486
• /
• 1997

The characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The atmospheric aerosols were sampled with classifying into 12 size ranges by the use of Andersen low-pressure impactor. Collected aerosol particles were extracted by ultrapure water and filtered to be separated into water-soluble and insoluble components. The concentrations 12 elements in both components were determined by PIXE analysis. And the concentrations of 8 ions in the soluble component were analyzed by ion chromatography. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The mass size distributions of S$(SO_4^{2-}), K(K^+), Zn and NH_4^+$ skewed to the smaller size range and those of Si, Ca$(Ca^{2+}), Fe, Na^+ and Mg^{2+}$ skewed to the larger size range. They had roughly one peak in the fine and coarse particle region,respectively. On the other hand, the mass size distribution of Ti, Mn, Ni, Cu, $Cl^- and NO_3^-$ were represented as the bimodal distribution. Fe and Si in the aerosol particles extracted into pure water are existing in high insoluble state. Conversely, almost the whole of S is dissolved in water.

• Journal of the Korean Home Economics Association
• /
• v.40 no.8
• /
• pp.183-190
• /
• 2002

This study was aimed at investigating the satisfaction in relation to clothing design and size-fit for nurse uniform in Korea. The subjects were 986 female nurses working in 12 hospitals selected by convenience sampling. The data were collected by questionnaires. Using SPSS package, frequency, percentage, t-test, ANOVA and SNK test were conducted. The results were divided into 2 categories as fellows; 1) Results of the satisfaction with the size-fit and size system of the nurse uniforms : Nurses satisfied at the individual size-fit system than ready-made size system. There was a considerable difference of the satisfaction with the size-fit depending on age and clinical career. And more than half of nurses were needed the concrete and precise size system. 2) Results of the actual design condition and clothing satisfaction : Nurses wore two-piece pants suits more than classical designed one-piece style. The princess-line, convertible collar and yoke design were preferred for nurse uniform with the high satisfaction. 41.6 percent of respondents used the cap obligatory and the white color and a patterned textile were generally used. The used fabrics were only polyester and cotton/polyester mixed spinning.

• The Journal of Korean Physical Therapy
• /
• v.32 no.5
• /
• pp.277-282
• /
• 2020

Purpose: The main purposes of this study are to identify the degree of effect size and variables related to it, on the effect of physical therapy on shoulder adhesive capsulitis. Methods: This study were collected 8 studies published between 2010.01.01. and 2020.08.01. The Analysis result confirmed 16 effect size data, the random effect model was chosen because of the heterogeneity of the data. Results: First, full case showed the largest mean effect size 3.28 (p<0.001). Second, Size of the effect according to hands on+off intervention the 5.17 (p>0.344). Third, Number of participants showed 15 or more effect size 4.19 (p<0.002). intervention period showed 8 weeks effect size 5.12 (p>0.425). Number of intervention showed 14 or less effect size 3.99 (p>0.061). Publication type showed thesis effect size 4.34 (p<0.003). Finally, 'Trim and Fill' result confirmed that the calibration effect size is 1.71 (p<0.001). Conclusion: We were able to confirm that physical therapy had great effect on shoulders adhesive capsulitis, and that the effect differed according to the methods of intervention, the methods of evaluation.

• Transactions of Materials Processing
• /
• v.15 no.5 s.86
• /
• pp.347-353
• /
• 2006

The delivery system such as sprue, runner and gate is a waste of resin in injection molding operation. In this study the reduction of runner size has been investigated using injection molding CAE softwares, Moldflow and Moldex3D, and commercial CFD Softwares, Fluent and Polyflow. To verify the computational results experiment was performed. There were three considerations in deciding optimal runner size in this study: minimum pressure at the gate that makes resin fully filled in the cavity, minimum runner size that compensates shrinkage of resin in the cavity, and frozen layer thickness formed in the runner during injection. Through the computer simulations the optimal runner size that satisfies those three considerations has been decided. Although the computational results among the softwares were slightly different, it was enough to predict the optimal runner size. The previous runner diameter was 8 mm and predicted optimal size was 5 mm. This was verified by injection molding experiment. Thus, the way of CAE application in deciding optimal runner size adapted in this study would be appropriated.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.129-137
• /
• 1998

A position of small and medium size business is increasing in the national economic. On the other hand, there are many difficulties in the small and medium size business. The most difficult problem is the financial supply for the small and medium size business. This study is analzing the financial stability ratios of the small and medium size business in comparision with financial ratios of a large enterprise and industrial average ratio. As the result, the degree of financial stability ratio of small and medium size business is lower than industrial standard ratio. While the degree of financial stability and liquidity ratios of the small and medium size business is higher than industry average ratio. the degree of dependence of borrowing of the small and medium size business is lower. Therefore, it is necessary for nation and administration organization to supply financing for the small and medium size business.