• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.376-378
• /
• 2005

In this study, we have evaluated and classified arthritic pathology using the acoustical analysis of knee joint sounds. Six normal subjects and 11 patients with knee problems were enrolled. Patients were divided into the 1st patient group which required an orthopeadic surgery and the 2nd patient group of osteoarthritis. During sitting and standing periods, subjects' active knee flexion and extension were monitored. Fundamental frequency, mean amplitude of pitch, jitter and shimmer were analyzed according to the position and the joint angle. The result showed that the fundamental frequency of the 2nd patient group and standing position was higher than the others, and that the pitch of sounds changed unstably.

• Hip & pelvis
• /
• v.35 no.1
• /
• pp.6-14
• /
• 2023

Purpose: The aim of this study was to determine correlation between the spinopelvic parameters in sitting and standing positions (sacral slope [SS], lumbar lordosis [LL], spinopelvic tilt [SPT], pelvic incidence [PI], and pelvic femoral angle [PFA]), with hip function assessed using the modified Harris hip scores (mHHs) in patients with symptomatic femoroacetabular impingement (FAI) at diagnosis. Materials and Methods: A retrospective study of 52 patients diagnosed with symptomatic FAI was conducted. Evaluation of the spinopelvic complex in terms of SS, LL, SPT, PI and PFA was performed using lateral radiographs of the pelvis and lumbosacral spine in standing and sitting positions. Assessment of hip function at diagnosis was performed using the mHHs. Calculation of spinopelvic mobility was based on the difference (Δ) between measurements performed in standing and sitting position. Results: The median time of pain evolution was 11 months (interquartile range [IQR], 5-24 months) with a median mHHs of 66.0 points (IQR, 46.0-73.0) at diagnosis. The mean change of LL, SS, SPT, and PFA was 20.9±11.2°, 14.2±8.6°, 15.5±9.0°, and 70.7±9.5°, respectively. No statistically significant correlation was observed between spinopelvic parameters and the mHHs (P>0.05). Conclusion: Radiological parameters of the spinopelvic complex did not show correlation with hip function at the time of diagnosis in patients with symptomatic FAI. Conduct of further studies will be required in the effort to understand the effect of the spinopelvic complex and its compensatory mechanics, primarily between the hip and spine, in patients with FAI before and after hip arthroscopy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.780-786
• /
• 2005

This study presents a non-video, non-invasive, automatic, on-site monitoring system the system employs ultrasonic transducers to detect behavior in sows before, during and after parturition. An ultrasonic transmitting/receiving (T/R) circuit of 40 kHz was mounted above a conventional parturition bed. The T/R units use ultrasonic time-of-flight (TOF) ranging technology to measure the height of the confined sows at eight predetermined locations. From this data, three momentary postures of the sow are determined, characterized as standing-posture (SP), lateral-lying-posture (LLP) and sitting posture (STP). By examining the frequencies of position switch Stand-Up-Sequence (SUS) between standing-posture (SP), lateral-lying-posture (LLP) and sitting-posture (STP) rate can be determined for the duration of the sow' confinement. Three experimental pureblooded Landrace sows undergoing normal gestation were monitored for the duration of confinement. In agreement with common observation, the sows exhibited increased restlessness as parturition approached. Analysis of the data collected in our study showed a distinct peak in Stand-Up-Sequence (SUS, i.e. the transition from lying laterally to standing up ) and sitting-posture (STP) rate approximately 12 h prior to parturition, the observed peak being 5 to 10 times higher than observed on any other measurement day. It is concluded that the presented methodology is a robust, low-cost, lowlabor method for the continuous remote monitoring of sows and similar large animals for parturition and other behavior. It is suggested that the system could be applied to automatic prediction of sow parturition, with automatic notification of remote management personnel so human attendance at birth could reduce rates of sow and piglet mortality. The results of this study provide a good basis for enhancing automation and reducing costs in large-scale sow husbandry and have applications in the testing of various large mammals for the effects of medications, diets, genetic modifications and environmental factors.

• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.26-37
• /
• 2011

Although there have been various studies related to the body's movement from a sitting to a standing position (sit-to-stand task), there is limited information on the kinematic changes on the frontal and transverse planes. The purpose of this study was to ascertain how pelvic tilt affects kinematic changes in the frontal and transverse planes in the hip and knee joints during a sit-to-stand task. For this study, 33 healthy participants (13 female) were recruited. Each participant rose from a sitting to a standing posture at his or her preferred speed for each of three different pelvic tilt trials (anterior, posterior, and neutral), and the measured angles were analyzed using a 3-D motion analysis system. A one-way repeated measure analysis of variance was performed with Bonferroni's post hoc test. In addition, an independent t-test was carried out to determine the sex differences in hip and knee joint kinematic changes during the sit-to-stand tasks. The results were as follows: 1) The hip and knee joint angle in the frontal and transverse planes showed a significant difference between the different pelvic tilt postures during sitting in the pre-buttock lift-off phase (pre-LO) (p<.05). Compared to the posterior pelvic tilt posture, the anterior pelvic tilt posture involved significantly greater hip joint adduction and internal rotation, knee joint adduction, and reduced internal rotation of the knee joint. 2) Sex differences were found with significant differences for males in the initial and maximal angles in the frontal plane of the hip and knee joint (p<.05). Females had a significantly smaller initial abduction angle of the hip joint and a significantly greater maximal angle of the hip adduction joint. These results suggest that selecting a sit-to-stand exercise for pelvic tilt posture should be considered to control abnormal movement in the lower extremities.

• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.655-665
• /
• 2010

This study analyzed the effects of skinny jean on women's health by questionnaire survey and measuring the pressure experienced under the clothing and participants' subjective view of the pressure level. The average size women in their 20s' waists is 26 inches and so three pairs of jeans were prepared and worn by 4 female participants. A survey was conducted to investigate how often participants wear skinny jeans and whether they had had any feelings of discomfort as a result of this. Participants responded that they hadexperienced middle to high levels of discomfort due to the high pressure inside skinny jeans. For the maximum value of clothing pressures, jean f2 at the part of buttocks showed $48.7gf/cm^2$. The pressure inside the clothing was found to be highest around the buttocks followed by the knees and finally the belly. The mean values of 7 measuring parts are different according to the jean type; f3 $20.8gf/cm^2$ > f2 $16.4gf/cm^2$ > f1 $15.5gf/cm^2$, which is corresponding to the order of pressure sensation, but not corresponding to the order of ease amount of clothing pattern: f2 > f3 > f1. Mean pressure values were also measured according to the body posture: they were found to by highest when sitting on a chair (21.3gf/$cm^2$), second highest when sitting on the floor ($19.2gf/cm^2$) and lowest when standing ($15.0gf/cm^2$). This is not always same to the order of participants subjective perceptions of the pressure, which is, they estimated pressure to be highest when sitting on the floor followed by sitting on a chair and lowest in a standing position.

• Physical Therapy Korea
• /
• v.24 no.4
• /
• pp.68-76
• /
• 2017

Background: Abdominal bracing exercise (ABE) and abdominal hollowing exercise (AHE) improve the lumbar flexibility and pulmonary function in various patients, yet the efficacy of ABE or AHE have not yet been evaluated. Objects: The purpose of this study was to compare the lumbar flexibility and pulmonary function during both ABE and AHE in healthy adults. Methods: The study included 40 healthy adults, who were randomly divided into the experimental group and control group, each with 20 subjects. All subjects performed ABE (experimental group) and AHE (control group). The lumbar flexibility such as trunk flexion test (sitting and standing position) and schober test and pulmonary function such as the spirometer including forced vital capacity (FVC) and force expiratory volume in one second ($FEV_1$) and chest circumference measurement (middle and lower chest) were measured, respectively. Two-way repeated analysis of variance was used to compare the lumbar flexibility and pulmonary function, respectively. Results: No significant effects of lumbar flexibility were observed on trunk flexion test from the sitting position (P=.478) and standing position (P=.096) in the ABE than in the AHE. However, the length of ABE was longer significantly than it of AHE (P=.024). No significant effects of lung function were observed on the FVC (P=.410) and $FEV_1$ (P=.072) in the ABE group than in the AHE group. And also, no significant effects of chest circumference measurement were observed on the inspiration (P=.468) and expiration (P=.563) in middle chest circumference and inspiration (P=.104) and expiration (P=.346) in lower chest circumference. Conclusion: This study indicated that the ABE is only more effective in lumbar flexibility by lumbar length difference than AHE in healthy adults.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.4
• /
• pp.779-791
• /
• 1997

The purpose of this study is to measure a perceived joint discomfort in the seated and standing position, and to provide ranking systems of perceived joint discomfort. Nineteen mole subjects with no history of musculo-skeletal disorders participated in the experiment. Their physical characteristics were: age $-25.4{\pm}2.7$years, stature $-171.9{\pm}6.0cm$, and body weight $-67.1{\pm}7.0kg$. The results showed that the perceived joint discomforts were different depending upon the joints involved in motion and their movement directions (degree of freedom of motions), which implied that the human body motions and their degrees of freedom should be classified into several distinct classes that need to be assigned different weights of postural stress. Therefore, three ranking systems based on the perceived joint discomforts were suggested, which were classified by the degree of freedom of motions and joints, by only degree of freedom motions, and by joints involved in motion, respectively. In the seated position, the hip movement was the most stressful, the bock was the second, and the shoulder was the third. Likewise, in the standing postures, the hip was the most, the bock was the second, and the ankle was the third. It was expected that these joint motion ranking systems could be used by practitioners of health and safety to improve the comfort of working postures in industry.

• PNF and Movement
• /
• v.14 no.1
• /
• pp.49-52
• /
• 2016

Purpose: The purpose of the present study was to examine the effects of the area of the base of support formed by the human body on the maximal voluntary isometric contraction of upper limb muscles. Methods: The study was conducted with 20 normal adults. To identify changes in the base of support, the maximal voluntary isometric contraction of the biceps muscle was measured in a standing position, a sitting position, and a lying position for each subject. The sizes of the base of support formed in the standing, sitting, and lying positions were set to 1, 2, and 3 respectively, based on the sizes, to analyze the correlations. The maximal voluntary isometric contraction of the biceps muscle was measured using surface electromyograms (EMGs) (Noraxon DTS, Germany). Results: The results showed negative correlations in which, as the size of the base of support increased, the maximal voluntary isometric contraction of the biceps muscle decreased. Conclusion: Changes in the base of support of the body affect the maximal voluntary isometric contraction of the upper limbs. Therefore, when resistance exercises are applied for muscle strengthening, the positions should be changed considering the changes in muscle activity according to those positions. In addition, when EMGs are used to measure the maximal voluntary isometric contraction, the measurements should be conducted in the same positions, considering muscle activity that changes according to the base of support and positions, for data quantification.

• Physical Therapy Korea
• /
• v.3 no.3
• /
• pp.44-58
• /
• 1996

The purpose of this study was to compare and evaluate various hand functions in the most common position (chair sitting, standing, floor sitting) used by cerebral palsied children with spastic diplegia. The results, analysed statistically, could be useful in suggesting treatment strategy for the improvement of hand function in such patient. For this study, 27 children mild or moderate spastic diplegia were chosen. They were patients of the Rehabilitation Hospital, Yonsei University Medical Center. Both dominant and nondominant hands were tested by the Box and Block Test. Bilateral hand function was tested by bead striding and card sorting activities. Collected data was analysed using univariate correlation analysis and MANOVA. Results were as follows: 1) In chair sitting there was a significant positive correlation between dominant hand scores in the Bloc and Box Test and chronological age, gestation period, and time of treatment initiation. In bilateral hand function, card sorting scores correlated positively with time of treatment initiation. 2) In standing, there was a significantly positive correlation between dominant hand scores in the Block and Box Test and time of treatment initiation. 3) In floor sitting, there was a significantly positive correlation between the dominance hand scores in the Block and Box Test and the tine of treatment initiation. Bead stringing, a bilateral hand activity, correlated positively with gestation period and birth weight but negatively with the postnatal incubation period. 4) That score of children who walked showed no significant difference in any of the three postures. 5) Highest test scores in children who could nat walk were in the Box and Block Test for nondominant hand in bead stringing for bilateral hand function. There scores occurred with the children in thee chair sitting posture. The results showed that, in order to improve hand function in children with spastic diplegia, it is necessary to maintain a well supported upright trunk posture with variations allowed for relevance to the chosen position of thee improvements hand activity being performed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.1
• /
• pp.15-20
• /
• 2023

In general, maintaining an incorrect sitting posture for a long time is widely known to adversely affect the spine. Recently, several researchers have been interested in the causal relationship between incorrect sitting posture and spinal diseases, and have been studying methods to precisely measure changes in sitting or standing posture to prevent spinal diseases. In previous studies, we have developed a sensor device capable of measuring real-time posture change, applied a momentum calculation algorithm to improve the accuracy of real-time posture change measurement, and verified the accuracy of the postural change measurement sensor. In this study, we developed a posture measurement and analysis device that considers changes in the center of body pressure through the developed sitting pressure measurement, and it confirmed the sensor as an auxiliary tool to increase the accuracy of posture correction training with improving the user's visual feedback.