• Journal of the Korean GEO-environmental Society
• /
• v.20 no.5
• /
• pp.5-12
• /
• 2019

On November 15, 2017, a unpredictable liquefaction damage was occurred at the $M_L=5.4$ Pohang earthquake and after, many researches have been conducted in Korea. In Korea, where there were no cases of earthquake damage, it has been extremely neglectable in preparing earthquake risk maps and building earthquake systems that corresponded to prevention and preparation. Since it is almost impossible to observe signs and symptoms of drought, floods, and typhoons in advance, it is very effective to predict the impacts and magnitudes of seismic events. In this study, 14,040 borehole data were collected in the metropolitan area and liquefaction evaluation was performed using the amplification factor. Based on this data, liquefaction hazard maps were prepared for ground accelerations of 0.06 g, 0.14 g, 0.22 g, and 0.30 g, including 200years return period to 4,800years return period. Also, the correlation analysis between the earthquake acceleration and LPI was carried out to draw a real-time predictable liquefaction hazard map. As a result, 707 correlation equations in every cells in GIS map were proposed. Finally, the simulation for liquefaction risk mapping against artificial earthquake was performed in the metropolitan area using the proposed correlation equations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.497-505
• /
• 2018

In a situation where the amount of bulky waste needs to be quantified, a three-dimensional model of the wastes can be constructed using drones. This study constructed a drone-based 3D model with a range of flight parameters and a GCPs survey, analyzed the relationship between the accuracy and time required, and derived a suitable drone application technique to estimate the amount of waste in a short time. Images of waste were photographed using the drone and auto-matching was performed to produce a model using 3D coordinates. The accuracy of the 3D model was evaluated by RMSE calculations. An analysis of the time required and the characteristics of the top 15 models with high accuracy showed that the time required for Model 1, which had the highest accuracy with an RMSE of 0.08, was 954.87 min. The RMSE of the 10th 3D model, which required the shortest time (98.27 min), was 0.15, which is not significantly different from that of the model with the highest accuracy. The most efficient flight parameters were a high overlapping ratio at a flight altitude of 150 m (60-70% overlap and 30-40% sidelap) and the minimum number of GCPs required for image matching was 10.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.667-676
• /
• 2019

In recent years, the occurrence of life and violent crime in the city centered on crime-prone areas has become a big issue, raising the public interest in safety from crime has been higher than ever. As the initial response to crime and the importance of crime prevention are emerging, the government is preparing various measures such as crime prevention service using advanced technology. This project is a demonstration project to select specific target sites and apply that on a trial basis with the main purpose of commercialization of intelligent crime prevention technologies and services. In order to spread the business through the demonstration project, it is expected that the practical economic evaluation as well as the academic and practical value of the project will have a great significance. In this study, the purpose of this research is to derive economic feasibility through technologies and services to be implemented in Indokwon district of Anyang city, which is selected demonstration site of the intelligent security, to promote the spread of business and contribute to the policy activation.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.7
• /
• pp.5-10
• /
• 2019

In recent Gyeongju and Pohang earthquakes, motions that exceed the design ground motion were recorded. This has led to adjustments to the design earthquake intensity in selected design guidelines. An increment in the design intensity requires reevaluation of all associated facilities, requiring extensive time and cost. Firstly, the seismic factor of safety of built concrete retaining walls are calculated. Secondly, the seismic margin of concrete retaining walls is evaluated. The design sections of concrete walls built at power plants and available site investigation reports are utilized. Widely used pseudo-static analysis method is used to evaluate the seismic performance. It is shown that all concrete walls are safe against the adjusted design ground motion. To determine the seismic margin of concrete walls, the critical accelerations, which is defined as the acceleration that causes the seismic factor of safety to exceed the allowable value, are calculated. The critical acceleration is calculated as 0.36g~0.8g. The limit accelerations are significantly higher than the design intensity and are demonstrated to have sufficient seismic margin. Therefore, it is concluded that the concrete retaining walls do not need to be reevaluated even if the design demand is increased up to 0.3g.

• Archives of Plastic Surgery
• /
• v.46 no.4
• /
• pp.336-343
• /
• 2019

Background Sternal rigid plate fixation (RPF) has been adopted in recent years in high-risk cases to reduce complications associated with steel wire cerclage, the traditional approach to sternal closure. While sternal RPF has been associated with lower complication rates than wire cerclage, it has its own complication profile that requires evaluation, necessitating a critical examination from a national perspective. This study will report the outcomes and associated risk factors of sternal RPF using a national database. Methods Patients undergoing sternal RPF from 2005 to 2016 in the American College of Surgeons-National Surgical Quality Improvement Program were identified. Demographics, perioperative information, and complication rates were reviewed. Logistic regression analysis was performed to identify risk factors for postoperative complications. Results There were 381 patient cases of RPF identified. The most common complications included bleeding (28.9%), mechanical ventilation >48 hours (16.5%), and reoperation/readmission (15.2%). Top risk factors for complications included dyspnea (odds ratio [OR], 2.672; P<0.001), nonelective procedure (OR, 2.164; P=0.010), congestive heart failure (OR, 2.152; P=0.048), open wound (OR, 1.977; P=0.024), and operating time (OR, 1.005; P<0.001). Conclusions Sternal RPF is associated with increased rates of three primary complications: blood loss requiring transfusion, ventilation >48 hours, and reoperation/readmission, each of which affected over 15% of the study population. Smokers remain at an increased risk for surgical site infection and sternal dehiscence despite RPF's purported benefit to minimize these outcomes. Complications of primary versus delayed sternal RPF are roughly equivalent, but individual patients may perform better with one versus the other based on identified risk factors.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.473-478
• /
• 2018

Radioactive aerosol generated in cutting and melting work during the NPP decommissioning process can cause internal exposure to body through workers' breath. Thus, it is necessary to assess worker internal exposure due to the radioactive aerosol during decommissioning. The actually measured value of the working environment is needed for accurate assessment of internal exposure, but if it is difficult to actually measure that value, the internal exposure dose can be estimated through recommended values such as the fraction of amount of intake and the size of particles suggested by the International Committee on Radiological Protection (ICRP). As for the selection of particle size, this study applied a value of $5{\mu}m$, which is the size of particles considering the worker recommended by the ICRP. As for the amount of generation, the amount of intake was estimated using data on the mass of aerosol generated in a melting facility at a site in Kozloduy, Bulgaria. In addition, using these data, this study calculated the level of radioactivity in the worker's body and stool and conducted an assessment of internal exposure using the BiDAS computer code. The internal exposure dose of Type M was 0.0341 mSv, that of Type S was 0.0909 mSv. The two types of absorption showed levels that were 0.17% and 0.45% of the domestic annual dose limit, respectively.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.588-595
• /
• 2018

This study has focused on evaluation of heavy metal contamination in seepage from 23 mine waste dumping sites in Korea. Seepage samples from the sites were taken and analyzed for heavy metals. The maximum levels (mg/L) in the samples were Al 53.98, As 16.19, Cd 1.15 Cu 37.30, Fe 28.64, Mn 39.00, Ni 0.097, Pb 0.750, and Zn 80.18. Among the sites, six mines were selected as continuous monitoring sites. As results of three months' monitoring of the sites, over the water guidelines for As, Cd, Cu, Fe, Mn, Zn and Al in seepage samples were found at two abandoned Au-Ag mines, Cd, Mn, Zn and Al at two Pb-Zn mines, and As, Fe and Mn at two other Fe-W mines. Therefore, those six mines need continuous monitoring on contamination assessment of seepage due to mining activities.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.763-768
• /
• 2018

Although the development of radiation therapy techniques has made the treatment more precise, exposure by radiation is unavoidable beyond the treatment site. In this study, we wanted to evaluate the absorbed dose according to the thickness of the bolus on the opposite side of the treatment in radiation treatment for breast cancer and to analyze the effect of dose reduction. An experiment was conducted on Rando phantom using VMAT treatment methods. Five points of A, B, C, D, and E were selected for the breast opposite the treatment, and when the dosimeters of 5, 10, 15, and 20 mm were used. The highest absorbed dose at point D closest to the treatment point was measured and lowest at point B furthest from the treatment point. The mean absorbed dose was 8.61 cGy When the bolus is not used and 8.10, 7.94, 8.06, and 8.10 cGy Depending on the thickness of the bolus. In this study, bolus was intended to be used to analyze the dose-reducing effects of breasts on the other side of the treatment. The results of the study showed the effect of dose reduction and the appropriate bolus thickness should be set up to reduce the dose in normal tissues.

• Korean Journal of Child Education & Care
• /
• v.19 no.3
• /
• pp.57-69
• /
• 2019

Objective: The purpose of this study is to identify the strengths and problems of the current in-service education system, and suggest ways to improve it in the future by looking at the current status of in-service education to strengthen the expertise of teachers and directors of childcare centers. In particular, I would like to search the current status of in-service education, including on-line special job competency education, which is responsible for one of the pillars of in-service education, and present the problems and measures to improve them. Methods: To that end, the present study conducted an analysis of issues based on the previous research on in-service education of childcare teachers' education, and conducted a literature examination focusing on laws, policies, and foreign cases related to in-service education. Results: In-service education for childcare teachers was categorized into educational process diversification and professionalism, educational method diversification, qualification management, and educational support, which were again organized into 14 core tasks. In addition, as a recent phenomenon that has not been discussed in detail in the preceding study, the phenomenon of increased participation in on-line special job competency education at the site of in-service education was analyzed and the problems were presented. Conclusion/Implications: Based on the results of this study, I proposed development measures such as changing the term 'in-service education' and recognizing the diversity of job competency education, the credit rating banking system for job competency education, the provision of on-line job competency education curriculum (basic courses/enhancing courses) for collective education courses, the expansion of education support for promotion to a higher grade courses and the conversion of the mandatory evaluation system for in-service educational institutions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.3
• /
• pp.71-80
• /
• 2019

The Fourth Industrial Revolution, centered on intelligence and information, began to take hold in 2016. This study uses virtual reality technology, which is the most popular technology of the Fourth Industrial Revolution. The purpose of this study is to explore a Virtual Walk-through method, which can be easily applied to landscape architecture. At present, virtual reality technology is widely used in the fields of games, emergency training, and architectural design. However, in the field of landscape architecture, it is still in the development stage. In addition, most of the traditional ways to display virtual reality use 2D images, but such methods have some limitations. Therefore, this research addresses the three stages of "design-exhibition-experience" and puts forward a new simple method called 'Virtual Walk-through' that breaks from traditional landscape design exhibitions. The results show that compared with traditional methods, virtual reality has many advantages, such as the freedom of experience, a diversity of viewing angles, information supply, interaction, etc. It can show high quality images and effects, which are suitable for landscape design. It provides an evaluation method for garden design that can be utilized in the future. It is simple and has value as it can reflect the method and the expected effects. Virtual reality technology can bring an infinite number of prospects to the development of landscape architecture.