• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1165-1166
• /
• 2006

An experiment was carried out to investigate the effect of Ba Stearate as a reducing agent on the magnetic and physical properties of anisotropic $BaFe_2-W$ type ferrite magnets. It was found that the magnetic properties of $BaO{\cdot}8.5Fe_2O_3$ were improved by adding 0.3 wt% of Ba Stearate, 0.5 wt% of $SiO_2$, and 0.5 wt% of CaO together. The optimum conditions for making magnets were as follows; semisintering condition: $1350^{\circ}C{\times}4.0$ h in nitrogen gas atmosphere, drying condition: $180^{\circ}C{\times}2.0$ h in air, sintering condition: $1160^{\circ}C{\times}1.5$ h in nitrogen gas atmosphere. Magnetic and physical properties of a typical sample were $J_m$ = 0.46 T, $J_r$ = 0.43 T, $H_{cJ}$ = 182.3 kA/m, $H_{cB}$ = 177.2 kA/m, $(BH)_{max}$ = 33.8 kJ/$m^3$, $T_C$ = $495^{\circ}C$ and $K_A$ = $2.65{\times}10^5\;J/m^3$ and $H_A$ = 1332 kA/m.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.360-367
• /
• 2011

Macroporous silicon carbide (SiC) ceramics were fabricated by powder processing and polymer processing using carbon-filled polysiloxane as a precursor. The effects of the starting SiC polytype, template type, and template content on porosity and flexural strength of macroporous SiC ceramics were investigated. The ${\beta}$-SiC powder as a starting material or a filler led to higher porosity than ${\alpha}$-SiC powder, owing to the impingement of growing ${\alpha}$-SiC grains, which were transformed from ${\beta}$-SiC during sintering. Typical flexural strength of powder-processed macroporous SiC ceramics fabricated from ${\alpha}$-SiC starting powder and polymer microbeads was 127 MPa at 29% porosity. In contrast, that of polymer-processed macroporous SiC ceramics fabricated from carbon-filled polysiloxane, ${\beta}$-SiC fillers, and hollow microspheres was 116MPa at 29% porosity. The combination of ${\alpha}$-SiC starting powder and a fairly large amount (10 wt%) of $Al_2O_3-Y_2O_3$ additives led to macroporous SiC ceramics with excellent flexural strength.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.625-630
• /
• 2012

Highly porous silicon carbide (SiC) ceramics were fabricated from polysiloxane, SiC and carbon black fillers, AlN-$Y_2O_3$ additives, and poly (ether-co-octene) (PEOc) and expandable microsphere templates. Powder mixtures with a fixed PEOc content (30 wt%) and varying SiC filler contents from 0-21 wt% were compression-molded. During the pyrolysis process, the polysiloxane was converted to SiOC, the PEOc generated a considerable degree of interconnected porosity, and the expandable microspheres generated fine cells. The polysiloxane-derived SiOC and carbon black reacted and synthesized nano-sized SiC with a carbothermal reduction during a heat-treatment. Subsequent sintering of the compacts in a nitrogen atmosphere produced highly porous SiC ceramics with porosities ranging from 78 % to 82 % and a flexura lstrength of up to ~7 MPa.

• E2M - 전기 전자와 첨단 소재
• /
• 제3권4호
• /
• pp.306-314
• /
• 1990

SrO-5.7Fe$_{2}$O$_{3}$의 Magnetoplumbite형 Sr페라이트에 첨가제 SiO$_{2}$, H$_{3}$BO$_{3}$CaCO$_{3}$, SrCO$_{3}$을 0.1-0.1wt%로 변화시켜 만든 등방성과 이방성의 자기이력곡선, 밀도, 감자곡선, 고유보자력 및 미세구조특성에 미치는 영향을 조사하였다. 위 첨가제는 페라이트 생성 및 특성개선에 효과적이었도 특히 등방성에서의 입도크기를 3.5.mu.m에서 1.7.mu.m로 하였을때 소결온도가 40.deg.C 낮은 1220.deg.C에서 잔류자속밀도가 2300G, 보자력이 1950Oe, 밀도가 4.51g/Cm$^{3}$, 교유보자력이 3500Oe로 각각 증가하였다. 이방성은 등방성 보다 원등히 우수하였고 최대에너지적 (BH)$_{max}$이 소결온도가 10.deg.C 낮은 1210.deg.C에서 1.13으로 부터 3.3MGOe로 증가하였다. 이값은 이론치의 61%에 도달하고 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.463-466
• /
• 2001

In recent year, Ferroelectric BLT($Bi_{4-x}$La$_{x}$Ti$_3$O$_{12}$) is a promising candidate materials. This study was Practiced to make good conditions of BLT targets. In this study, calcination and sintering temperature were kept at 75$0^{\circ}C$, 110$0^{\circ}C$ for 2 hour respectively. the density obtained 7.612, 7.98, 7.877 g/㎤ as La$_2$O$_3$ contents were 0.0mol%, 0.25mo1%, 0.5mol%. Especially, the lanthanum content of 0.5 mol% measured C-axis (117) preferred orientation more than the others targets in the XRD. In $\varepsilon$$_{r}$-f relationship using by HP 4194 A impedance analyzer, the 0.5 mol% observed above 200 relative dielectric constant. but the dissipation factor was higher than others targets at 100Hz~13MHz range. SEM photograph with the content of La$_2$O$_3$ was observed like rod and plate types.types.s.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.325-326
• /
• 2006

Using $6wt%Y_2O_3-2wt%Al_2O_3$ as sintering additives and Si as a raw powder, the continuously porous in-situ $Si_2N_2O-Si_3N_4$ bodies were fabricated by multi-pass extrusion process and their microstructures were investigated depending on the addition of carbon (0-9wt%) in the mixture powder. The introduction of $Si_2N_2O$ fibers observed in the unidirectional continuous pores as well as in the pore-frame regions of the nitrided bodies can be an effective method in increasing the filtration efficiency. In the case of no carbon addition, the network type $Si_2N_2O$ fibers with high aspect ratio appeared in the continuous pores with diameters of 150-200 nm. However, in the case of 9wt% C addition, the fibers were found without any network type and had diameters of 200-250 nm.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.307-312
• /
• 2018

Liquid phases in ZnO varistors cause more complex phase development and microstructure, which makes the control of electrical properties and reliability more difficult. Therefore, we have investigated 2 mol% $CaCO_3$ doped $ZnO-Co_3O_4-Cr_2O_3-La_2O_3$ (ZCCLCa) bulk ceramics as one of the compositions without liquid phase sintering additive. The results were as follows: when $CaCO_3$ is added to ZCCLCa ($644{\Omega}cm$) acting as a simple ohmic resistor, CaO does not form a secondary phase with ZnO but is mostly distributed in the grain boundary and has excellent varistor characteristics (high nonlinear coefficient ${\alpha}=78$, low leakage current of $0.06{\mu}A/cm^2$, and high insulation resistance of $1{\times}10^{11}{\Omega}cm$). The main defects $Zn_i^{{\cdot}{\cdot}}$ (AS: 0.16 eV, IS & MS: 0.20 eV) and $V_o^{\bullet}$ (AS: 0.29 eV, IS & MS: 0.37 eV) were found, and the grain boundaries had 1.1 eV with electrically single grain boundary. The resistance of each defect and grain boundary decreases exponentially with increasing the measurement temperature. However, the capacitance (0.2 nF) of the grain boundary was ~1/10 lower than that of the two defects (~3.8 nF, ~2.2 nF) and showed a tendency to decrease as the measurement temperature increased. Therefore, ZCCLCa varistors have high sintering temperature of $1,200^{\circ}C$ due to lack of liquid phase additives, but excellent varistor characteristics are exhibited, which means ZCCLCa is a good candidate for realizing chip type or disc type commercial varistor products with excellent performance.

• 한국재료학회지
• /
• 제7권10호
• /
• pp.872-876
• /
• 1997

(1-x)CaTi $O_{3}$-xLa(Z $n_{1}$2/ $Ti_{1}$2/) $O_{3}$의 마이크로 유전특성을 조사하였다. x가 증가함에 따라 비유전율과 공진주파수의 온도계수는 감소하였으며, Qㆍ $f_{0}$는 증가하였다. 그 결과 x=0.5인 (C $a_{0.5}$L $a_{0.5}$)( $Ti_{0.75}$Z $n_{0.25}$) $O_{3}$의 조성에서 $\varepsilon$$_{r}$=51, Qㆍ $f_{0}$=38,000 (at 7 GHz), $\tau$$_{f}$=+5ppm/$^{\circ}C$의 유전특성이 나타났다. (C $a_{0.5}$L $a_{0.5}$)( $Ti_{0.75}$Z $n_{0.25}$) $O_{3}$조성의 소결온도를 저하시키기 위하여 B $i_{2}$ $O_{3}$를 주조성으로한 소결체를 첨가하여 소결 및 유전특성을 조사하였다. 1wt% 0.76B $i_{2}$ $O_{3}$-0.24NiO가 첨가된 경우 소결온도는 15$0^{\circ}C$ 낮아졌으며, 비유전율 ($\varepsilon$$_{r}$), 공진주파수의 온도계수($\tau$$_{f}$), Qㆍ $f_{0}$가 각각 50+5ppm/$^{\circ}C$, 35,000인 마이크로파 유전특성이 얻어졌다. 또한 3wt%의 0.76B $i_{2}$ $O_{3}$-0.24NiO가 첨가된 경우 소결온도는 20$0^{\circ}C$ 저하되었고, 비유전율 ($\varepsilon$$_{r}$)과 공진주파수의 온도계수 ($\tau$$_{f}$)는 변하기 않았으나, Qㆍ $f_{0}$값이 38,000에서 25,000으로 저하되었다. 25,000으로 저하되었다.되었다.되었다.되었다.

• 한국세라믹학회지
• /
• 제42권2호
• /
• pp.132-139
• /
• 2005

마이크로파 유전체 세라믹스 $BaO-Nd_{2}O_3-TiO_{2}(BNT)$계 상용분말과 PbO-base의 결정화 유리프릿 복합체를 출발원료로 하여 테입 케스팅법으로 그린시트를 제초하기 위해 첨가유기물의 조성 변화에 따른 슬러리의 분산특성 및 유동특성 그리고 최종그린시트의 그린/소결밀도 변화를 연구하였다. 분산제량의 증가는 분산에 유효하였으나, 일정량 이상이 첨가되면 분산을 저해하는 요인으로 작용하였으며 복합체 분말에 1.75 wt$\%$의 fish oil을 첨가하였을 때 분산특성이 가장 우수하였다 준비된 모든 조성의 슬러리에서 의가소성거동(shear thinning)이 나타났고 파우더, 바인더 그리고 유기물의 전체 함량이 증가할수록 상대점도는 증가하는 경향을 나타내었다. 복합체 분말과 용매의 비율 65 : 35, 결합제는 6 wt$\%$, 가소제는 3 wt$\%$에서 테이프의 특성이 가장 우수하였다. 이때 슬러리의 점도는 677cps, 그린/소결밀도는 $3.3g/cm^3,\;5.56g/cm^3$로 각각 나타났다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.347-351
• /
• 2004

[ $Si_3N_4$ ] composites have been extensively studied for engineering ceramics, because it has excellent room and high temperature strength, wear resistance properties, good resistance to oxidation, and good thermal and chemical stability. In the present work, carbon short fiber reinforced $Si_3N_4$ ceramics were fabricated by hot press method in $N_2$ atmosphere at $1800^{\circ}C$ using $Al_2O_3\;and\;Y_2O_3$ as sintering additives. Content of carbon short fiber was $0\%,\;0.1\%\;and\;0.3\%$. The composites were evaluated in terms of density, flexural strength and elastic modulus through the 3-point bending test at room temperature. Also, The wear behavior was determined by the pin on disk wear tester using silicon nitride ball. Experimental density and flexural strength decreased with increasing content of carbon fiber. But specific modulus increased with increasing content of carbon fiber. In addition, friction coefficient and specific wear loss decreased with increasing content of carbon short fiber by reason of interfacial defects between matrix and fiber.