• Journal of KIISE
• /
• v.44 no.10
• /
• pp.1062-1070
• /
• 2017

Real-time transmission studies in wireless sensor networks propose a mechanism that exploits a node that has a higher delivery speed than the desired delivery speed in order to satisfy real-time requirement. The desired delivery speed cannot guarantee real-time transmission in a congested area in which none of the nodes satisfy the requirement in one hop because the desired delivery speed is fixed until the packet reaches the sink. The feature of this mechanism means that the packet delivery speed increases more than the desired delivery speed as the packet approaches closer to the sink node. That is, the packet can reach the sink node earlier than the desired time. This paper proposes an improved real-time transmission by controlling the delivery speed using the temporal gain which occurs on the packet delivery process. Using the received data from a previous node, a sending node calculates the speed to select the next delivery node. The node then sends a packet to a node that has a higher delivery speed than the recalculated speed. Simulation results show that the proposed mechanism in terms of the real-time transmission success ratio is superior to the existing mechanisms.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.130-131
• /
• 2007

Wireless Sensor Network typically incorporates diverse applications within the same network. A sensor node may have multiple sensors i.e. light, temperature, seismic etc with different transmission characteristics. Each application has different characteristics and requirements in terms of transmission rates, bandwidth, packet loss and delay demands may be initiated towards the sink. In this paper we propose Heterogeneous Traffic Oriented Rate Control Protocol (HTRCP) which ensures efficient rate control for diverse applications according to the priority specified by the sink. Moreover. HTRCP ensures the node priority based hop by hop dynamic rate adjustment for high link utilization.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.9
• /
• pp.43-50
• /
• 2018

In this paper, we propose a hexagon model-based efficient beacon frame scheduling approach for wireless sensor networks. The existing beacon frame scheduling approaches use a lot of slots and subslots for the beacon frame scheduling. Thus, the data from source nodes are not efficiently delivered to a sink node. Also in case a sink node needs to broadcast a beacon frame to the nodes in the network, delivering the beacon frame to the network nodes is not efficient as well. Thus, to solve the problem, we use a hexagon model to find the number of slots and subslots for the beacon frame scheduling. By using them for the beacon frame scheduling, the proposed approach performs better than other approaches in terms of the data transmission delay, the number of received data, the beacon transmission delay and the number of relaying the beacon frames.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1167-1169
• /
• 2009

Multipath routing in wireless sensor networks has been proven to provide with increased data delivery ratio, security, robustness to node and link failures, network throughput, etc. However, the energy cost for multiple routes construction and their maintenance is very high. This paper proposes a sink-initiated, node-disjoint multipath routing protocol for static wireless sensor networks that significantly minimizes the route construction messages and thereby saves the critical batter energy of sensor nodes. It also distributes the traffic load spatially over many nodes in the forwarding paths, which ensures balanced energy consumption in the network and thereby increases the network lifetime. The simulation results show that it decreases the routing overhead as well as the standard deviation of nodes' residual energies.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.565-566
• /
• 2020

본 논문에서는 이동 싱크 시스템을 위한 앵커 노드의 결정 방식에 대해 고려한다. 분산 지역의 센서 시스템에 대한 싱크 시스템의 방문에서 주기적 이동이 고려될 수 있다. 이동 싱크가 분산된 지역을 주기적으로 방문할 경우 분리된 지역의 센서 시스템은 싱크 시스템의 방문 시간을 예측할 수 있다. 싱크 시스템은 지정된 시간 안에 방문 지역에 접근하며 앵커 노드는 싱크 시스템과의 네트워크 연결을 수행한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3472-3480
• /
• 2010

The Clustering technology of Energy efficiency wireless sensor network gets the energy efficiency by reducing the number of communication between sensor nodes and sink node. In this paper, First analyzed on the clustering technique of the distributed clustering protocol routing scheme LEACH (Low Energy Adaptive Clustering Hierarchy) and HEED (Hybrid, Energy-Efficient Distributed Clustering Approach), and based on this, new energy-efficient clustering technique is proposed for the cause the maximum delay of dead nodes and to increase the lifetime of the network. In the proposed method, the cluster head is elect the optimal efficiency node based on the residual energy information of each member node and located information between sink node and cluster node, and elected a node in the cluster head since the data transfer process from the data been sent to the sink node to form a network by sending the energy consumption of individual nodes evenly to increase the network's entire life is the purpose of this study. To verify the performance of the proposed method through simulation and compared with existing clustering techniques. As a result, compared to the existing method of the network life cycle is approximately 5-10% improvement could be confirmed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1431-1439
• /
• 2016

In this paper, we propose a new location service and location-based routing for data dissemination from a source to a mobile group sink in less energy consumption of the sensor node. Unlike the existing protocols, the proposed protocol uses a leader sink instead of a group area as the location information to represent a mobile sink group. The proposed protocol also uses grid leaders on virtual grid structure to support sink mobility in location service. By using a leader sink as a representative and grid leaders for mobility supporting, the proposed protocol can exploit an efficient hierarchical location service and data dissemination method without using flooding. Accordingly, the proposed protocol carries out upper layer location services and data dissemination between a leader sink and a source and lower layer location services and data dissemination between the leader sink and member sinks. Simulation results demonstrate that the proposed protocol achieves energy-efficiency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.845-848
• /
• 2008

In case of application test in wireless sensor network, there are many difficulties in power supplying to wireless sensor node, installing and deploying of sensor nodes, maintaining and debugging. For efficient development and maintenance of wireless sensor network-based application, a simulator is essentially needed. However, the existing wireless sensor network simulators are focused to distribution of MAC address, routing, power management, it is not suitable to test the function of application in host which processes message through sink node. In this paper, we designed and implemented a log-based simulator for application running in host connected sink node.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2257-2264
• /
• 2011

Sensor nodes in Wireless sensor network have limited resources and consume almost all energy to the communication. For its traffic feature as a burst traffic type toward a sink node, it has high probability to network congestion. Network congestion causes packet drops and retransmission of dropped packets draws energy consumption. In particular, the loss of packet that is from the sensor node far away from a sink node requires additional energy consumption by frequent retransmission. This paper presents a traffic control mechanism that determines packet transfer by considering priority of packet and congestion level as well as hop count. Analysis of proposed mechanism by simulation demonstrated that it improved energy efficiency.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.20-26
• /
• 2016

A wireless passive sensor network is a network which, by letting RF sources supply energy to sensor nodes, is - at least theoretically - able to live an eternal life without batteries. Due to the technological immaturity, however, a wireless passive sensor network still has many difficulties; energy scarcity, non-simultaneity of energy reception and data transmission and inefficiency in data transmission occurring at sensor nodes. Considering such practical constraints, in this paper, we propose an elementary MAC scheme supporting many sensor nodes to deliver packets to a sink node. Based on a time structure in which a charging interval for charging capacitors by using received and an acting interval for communicating with a sink node are alternately repeated, the proposed MAC scheme delivers packets to a sink node according to slotted ALOHA. In general, a contention-type scheme tends to exhibit relatively low throughput. Thus, we multilaterally evaluate the throughput performance achieved by the proposed MAC scheme using a simulation method. Simulation results show that the network-wide throughput performance can be enhanced by properly setting the length of acting interval.