• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.169-172
• /
• 1999

Recently, the wavelet transform has been a new and powerful tool for signal processing. It is more suitable specially for the feature extraction and detection of non-stationary signals than traditional methods such as, the Fourier Transform(FT), the Fast Fourier Transform(FFT) and the Least Square Method etc. because of the characteristic of the multi-scale analysis and time-frequency domain localization. The wavelet transform has been developed for the analysis of PD pulse signal to raise in the progress of insulation degradation. In this paper, the wavelet transform was applied to one foundational method for feature extraction. For the obtain experimental data, a computer-aided partial discharge measurement system with a single acoustic sensor was used. If we are applying to the neural network method the accumulated data through the extracted feature, it is expected that we can detect the PD pulse signal in the insulation materials on the on-line.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.71-74
• /
• 2006

Discharge of the flat lamp lighting source research arc requested very much. For improving brightness, life time, efficiency of flat lamp, plasma diagnosis of the flat lamp lighting source to understand property of lighting source is very important. distance of discharge electrode is 5.5mm and width is 16.5mm, we measured electron temperature and electron density measured with single langmuir probe in flat lamp. we tested the discharge from 100 Torr to 300 Torr pressure. the Pulse is rectangular pulse with frequency 20kHz and Duty ratio 20%. Resultly, electron temperature decreases and electron density increase as increase the gas pressure and electron temperature decreases and electron density increase as increase the voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2190-2192
• /
• 2005

Discharge of the flat lamp lighting source research are requested very much. For improving brightness, life time, efficiency of flat lamp, plasma diagnosis of the flat lamp lighting source to understand property of lighting source is very important. distance of discharge electrode is 5.5mm and width is 16.5mm, we measured electron temperature and electron density measured with single langmuir probe in flat lamp. we tested the discharge from 100 Torr to 300 Torr pressure. the Pulse is rectangular pulse with frequency 20kHz and Duty ratio 20%. Resultly, electron temperature decreases and electron density increase as increase the gas pressure and electron temperature decreases and electron density increase as increase the voltage.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.206-209
• /
• 2006

At present, the cold cathode fluorescent lamp (CCFL) using mercury lamp has been generally used far liquid crystal backlight source of personal computer and car navigation and so on. This kind of lamp is more excellent on luminance performance and cost. However, the requirements of liquid crystal backlight due to a light source without mercury have been strongly increased from a viewpoint of the actual influence on environmental preservation and environmental recycling. As fluorescent lamp without mercury, Dielectric Barrier Discharge based rare gas fluorescent lamp (DBD-FL) using xenon (Xe) gas has been studied so far. This DBD lamp has no influence on the human body and environmental recycle. Its operating life is long because electrode is out. In this paper, the simulation and experimental results of soft switching high frequency inverter with reverse blocking single switch as a high frequency power supply circuit for DBD-FL using Xe gas are comparatively evaluated and discussed from a practical point of view.

• 조명전기설비학회논문지
• /
• 제21권8호
• /
• pp.27-33
• /
• 2007

램프(ramp) 파형의 프라이밍 펄스를 표시방전 유지기간에 중첩시켜 인가함으로써, 단일 구동회로를 사용하여 플라즈마 디스플레이 패널(PDP)의 전체를 동시에 방전시킬 수 있는 새로운 프라이밍(priming) 방전기술을 고안하였다. 실험결과로부터 표시방전이 없는 화소에만 프라이밍 방전이 일어남을 확인하였으며 표시방전은 프라이밍 펄스의 영향을 거의 받지 않는다는 것을 알았다. 또한 제안된 프라이밍 방전 기술을 적용한 구동방식을 사용하여 0.7 [${\mu}s$]의 어드레스 펄스폭을 가지는 고속 구동을 실현하였고 40[V]의 넓은 어드레스 전압 범위를 얻었다. 이 결과는 1080개의 수평주사선수를 가지는 full-HDTV PDP를 밝기의 감소 없이 구동할 수 있으며 이 기술은 상용의 구동IC를 사용할 수 있도록 설계되었으므로 상용화 가능성도 높다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.391-394
• /
• 2006

This paper presents soft switching zero voltage switching high frequency inverter for rare gas fluorescent lamp using dielectric-barrier discharge phenomenon. The simple high-frequency inverter can completely achieve stable zero voltage soft switching (ZVS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZVS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this high frequency Inverter are illustrated as compared with computer simulation results and experimental ones. Its light dimming characteristics due to power regulation scheme are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proven from the practical point of view.

• 한국수자원학회논문집
• /
• 제56권12호
• /
• pp.871-881
• /
• 2023

본 연구에서는 영주댐 하류 하천을 대상으로 2차원 수치모형인 Nays2DH를 적용하여 펄스방류 등 다양한 유량 조건에서 하류 하천의 역동성을 파악하기 위해 하도의 지형변화 특성 및 하상기복지수를 분석하였다. 수치모의에 적용되는 유량패턴은 등류 흐름, 정규화된 단일홍수, 펄스방류, 그리고 정규화된 펄스방류 등 4개의 유형이다. 수치모의 결과, 정규화를 적용한 펄스방류 조건일 때 하상고 및 하도의 변화가 가장 큰 것으로 나타났다. 총 하상 변화량은 등류 흐름 조건일 때 29.88 m, 정규화된 단일 홍수 조건일 때 27.46 m, 펄스 방류일 때 29.63 m 그리고 정규화된 펄스 방류일 때 31.87 m로이며, 이 조건에서 세굴과 퇴적의 변동 폭이 가장 크게 나타났다. 하상기복지수(BRI)를 분석한 결과, 등류 조건, 펄스방류, 그리고 정규화된 펄스방류 조건은 시간이 지날수록 BRI가 증가한다. 그러나, 정규화된 단일홍수에서는 첨두유량(14 hrs) 이후 30 hrs 까지 BRI가 급격하게 증가하지만, 그 이후부터는 증가 폭이 점점 감소하고, 56 hrs부터는 감소하였다. 수치모의가 끝날 때(72 hrs) BRI는 등류일 때 2.95, 정규화된 단일홍수일 때 3.31, 펄스방류일 때 3.34, 정규화된 펄스방류일 때 3.78이다. 따라서, 정규화된 펄스방류가 단일홍수나 등류보다 더 큰 역동성을 줄 수 있고, 하류로 갈수록 역동성이 커지면서 댐 하류하천의 환경개선에 효과를 가져올 수 있을 것으로 기대한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1244-1247
• /
• 2005

The material removal mechanism of Electrical Discharge Machining (EDM) process has been studied for several decades. However, understanding of the material removal mechanism is still a difficult problem because the mechanism involves complicated physical phenomena including plasma. Especially, for a micro-EDM process, due to the influence of the debris that is generated during the machining process, quantitative modeling of EDM becomes more complex. To understand better the effects of the debris in the micro-EDM process experimentally, a new approach has been introduced in this study. Using a specially designed workpiece holder, the debris generated during the EDM with various process conditions has been collected. Then, using a simulated environment using micro-sized metal powders, the influence of the debris during the single EDM discharge has been observed. The effects of EDM process parameters on the debris size and product quality are discussed.

• 대한전자공학회논문지
• /
• 제5권3호
• /
• pp.25-30
• /
• 1968

세논 섬광관의 방전회로에 관한 특성을 상세히 논했다. 섬광관은 전류에 비전형적이므로 방전회로에 관한 의 비선형 미분방정식을 유도하여 해를 상이형전자 계산기로 구했다. 또한 더욱이 임의의 섬광관에 대한 입력에너지 펄스지속시간 및 모양, 인덕턴스, 콘덴서 그리고 동작전압에 대해 완전히 고찰했다. 아울러 본 해석결과를 이용하면 성광관 방전계통회로를 정확히 설계할 수 있음을 제시했다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.160-164
• /
• 2002

A special discharge cell containing a free conducting particle was used to generate the discharges in $SF_6$. The analog bandwidth of the measurement system exceeded 5 GHz. The measured signals were processed to compensate for the response of the measurement system. The discharge current rise time was in the range of 70 ps, while its full-width half-maximum was 120 ps. Single and double current pulses of positive and negative polarities were measured. Likewise, these pulses were compared with the measurement obtained using a conventional partial discharge detector of the IEC60270 type