• 한국인터넷방송통신학회논문지
• /
• 제11권3호
• /
• pp.9-15
• /
• 2011

리플렉트어레이 안테나는 반사경 안테나의 단점을 보완하여 대체할 새로운 형태의 안테나로 대두되고 있다. 하지만 반사판이 단층구조일 경우 대역폭이 매우 좁다는 단점이 있고, 대역폭을 넓히기 위하여 다층구조의 반사판을 사용할 경우 설계가 어렵고 제작 단가가 높아지게 된다. 본 논문에서는 이러한 단점들을 극복하기 위하여 단층구조를 사용하여 제작 단가를 낮추면서 협대역 특성을 극복할 수 있는 정사각형에 U자 모양 슬롯을 낸 패치를 이용하여 리플렉트어레이 안테나를 설계하였다. 제안된 리플렉트어레이 안테나는 12.5 GHz에서 55.5 %의 효율과 14 % 이상의 1 dB gain bandwidth 특성을 갖는다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.8-11
• /
• 2006

High temperature superconducting coated conductor has various buffer structures on Ni-W alloy. We comparatively studied the growth conditions of a multi buffer layer $(CeO_2/YSZ/CeO_2)$ and a single buffer layer$(CeO_2)$ on textured Ni-W alloy tapes. XRD data showed that the qualities of in-plane and out-of-plane textures of the two type buffer structures were good. Also, we investigated the properties of SmBCO superconducting layer that was deposited on the two type buffer structure. The SmBCO superconducting properties on the single and multi buffer structure showed different critical current values and surface morphologies. FWHM of In-plane and out-of-plane textures were $7.4^{\circ},\;5.0^{\circ}$ in the top CeO2 layer of the multi-buffer layers of $CeO_2/YSZ/CeO_2$, and $7.3^{\circ},\;5.1^{\circ}$ in the $CeO_2$ single buffer layer. $1{\mu}m-thick$ SmBCO superconducting layers were deposited on two type buffer layer. $I_c$ of SmBCO deposited on single and multi buffer were 90 A/cm, 150 A/cm and corresponding $J_c$ were $0.9MA/cm^2,\;1.5MA/cm^2$ at 77K in self-field, respectively.

• 문화기술의 융합
• /
• 제3권4호
• /
• pp.165-169
• /
• 2017

CNN(Convolutional Nerual Network)는 기계학습 알고리즘 중에서도 이미지의 인식과 분류에 뛰어난 성능을 보이는 알고리즘 중 하나이다. CNN의 경우 간단하지만 많은 연산량을 가지고 있어 많은 시간이 소요된다. 따라서 본 논문에서는 CNN 수행과정에서 많은 처리시간이 소모되는 convolution layer와 pooling layer, fully connected layer의 연산수행을 SIMT(Single Instruction Multiple Thread)구조의 GPGPU(General-Purpose computing on Graphics Processing Units)를 통하여 병렬로 연산처리를 수행했다. 또한 convolution layer의 출력을 저장하지 않고 pooling layer의 입력으로 바로 사용함으로 메모리 접근횟수를 줄여 성능 향상을 기대했다. 본 논문에서는 이 실험검증을 위하여 MNIST 데이터 셋을 사용하였고 이를 통하여 제안하는 CNN 구조가 기존의 구조보다 12.38% 더 좋은 성능을 보임을 확인했다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.109.2-109.2
• /
• 2011

A photovoltaic system is getting the spotlight for a environment-friendly energy source. But its location is limited because a lot of land is necessary for photovoltaic arrays. Nevertheless, its dissemination is rapidly increasing more than 40 % every year and exceeded about 400 MW in 2009. The radical growth of a photovoltaic system aggravated a lack of sites, so that forests and farmland were destroyed. It is demanded to make use of a vacant lot or little piece of land for the way to solve the lack of sites and improve the location requirements for a photovoltaic system. General photovoltaic arrays are consist of a single layer structure and needs enough separation distances to maximize the amount of solar radiation and to eliminate influences by the shadow of other arrays. So that a large amount of land is required for the site. The solar cell arrays with long separation distances can not be placed in a small vacant lot and its site application efficiency is low. This study optimized photovoltaic arrays as multilayered structure with movable sleeves for the efficient photovoltaic in a small site. The existing photovoltaic arrays with a single layer structure were fixed or tracking systems. In this experimental equipment, photovoltaic arrays attached to the multilayers have rectilinear movement and rotary motion using sleeves. Therefore, shadow influences were removed and the generation capacity was improved. On the simulation result, generation increased by about 30% in the same site considering shadow influences and so on.

• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.45-52
• /
• 2016

The single layer latticed domes have attracted many designers and researchers's attention all of the world, because these structures as spatial structure are of great advantage in not only mechanical rationality but also function, fabrication, construction and economic aspect. But single layer latticed domes are apt to occur the unstable phenomena that are called "buckling" because of the lack of strength of members, instability of structural shape, etc. In the case of latticed dome, there are several types of buckling mode such as overall buckling, local buckling, and member buckling according to the shape of dome, section type of member, the size of member, junction's condition of member and so on. There are many methods to increase the buckling strength of the single layer latticed dome, that is, with the change of geometrical shape of dome, the reinforcement of buckled member, etc. Therefore, the purpose of this study is to verify the reinforcement effect of buckled member when designers reinforce the buckled member to increase the buckling strength of single layer latticed dome with 3-way grid.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.229.1-229.1
• /
• 2014

Tactile sensors have widely been researched in the areas of electronics, robotic system and medical tools for extending to the form of bio inspired devices that generate feeling of touch mimicking those of humans. Recent efforts in adapting the tactile sensor have included the use of novel materials with both scalability and high sensitivity [1]. Graphene, a 2-D allotrope of carbon, is a prospective candidate for sensor technology, having strong mechanical properties [2] and flexibility, including recovery from mechanical stress. In addition, its truly 2-D nature allows the formation of continuous films that are intrinsically useful for realizing sensing functions. However, very few investigations have been carrier out to investigate sensing characteristics as a device form with the graphene subjected to strain/stress and pressure effects. In this study, we present a sensor of vertical forces based on single-layer graphene, with a working range that corresponds to the pressure of a gentle touch that can be perceived by humans. In spite of the low gauge factor that arises from the intrinsic electromechanical character of single-layer graphene, we achieve a resistance variation of about 30% in response to an applied vertical pressure of 5 kPa by introducing a pressure-amplifying structure in the sensor. In addition, we demonstrate a method to enhance the sensitivity of the sensor by applying resistive single-layer graphene.

• 한국공간구조학회논문집
• /
• 제6권4호
• /
• pp.35-44
• /
• 2006

대공간 구조형식에는 기존의 기둥-보 구조형식에서 벗어나 쉘구조형식과 같은 형태저항 구조형식이 가장 유효한 구조형식으로 인식되고 있다. 특히 지간 $200m{\sim}300m$ 이상의 대공간구주 형식으로는 중량구조인 연속체의 쉘보다는 래티스 돔과 같은 공간 트러스형식 등의 유리하다. 시공, 제작상의 편리성, 구조미 등을 이유로 복층래티스 돔과 더불어 단층의 래티스 돔 형식도 실제 구조물에서 많이 적용되고 있다. 그러나 대공간 단층 래티스 돔의 경우 아직까지 외력의 작용으로 인한 변형과 파괴경로가 명확하게 해명되지 못한 부분이 있다. 본 연구에서는 대공간 구조형식에 적합한 래티스 돔을 대상으로 좌굴의 특성을 규명하여 안정적인 구조 설계의 기초 자료를 제시하기 위하여 실험을 수행하였다. 주된 실험변소는 격자의 간격과 돔의 지붕 강성 유무를 대상을 하였으며, 격자의 간격은 돔을 4분할, 5분할, 6분할, 7분할로 하여 정하였다. 가력은 돔의 전면에 걸쳐 구심의 등분포하중이 작용하도록 하였다.

• Structural Engineering and Mechanics
• /
• 제62권4호
• /
• pp.455-464
• /
• 2017

Rayleigh damping model is recommended in the recently developed Performance-Based Earthquake Engineering (PBEE) methodology, but this methodology does not provide sufficient information due to the complexity of the damping mechanism. Furthermore, each Rayleigh-type damping model may have its individual limitations. In this study, Rayleigh-type damping models that are used widely in engineering practice are discussed. The seismic performance of a large-span single-layer latticed dome subjected to earthquake ground motions is investigated using different Rayleigh damping models. Herein a simulation technique is developed considering low cycle fatigue (LCF) in steel material. In the simulation technique, Ramberg-Osgood steel material model with the low cycle fatigue effect is used to simulate the non-uniformly distributed material damping and low cycle fatigue damage in the structure. Subsequently, the damping forces of the structure generated by different damping models are compared and discussed; the effects of the damping ratio and roof load on the damping forces are evaluated. Finally, the low cycle fatigue damage values in sections of members are given using these damping models. Through a comparative analysis, an appropriate Rayleigh-type damping model used for a large span single-layer latticed dome subjected to earthquake ground motions is determined in terms of the existing damping models.

• 대한전자공학회논문지TC
• /
• 제40권3호
• /
• pp.18-24
• /
• 2003

본 논문에서는 두 층 마이크로스트립 구조를 이용한 공진기 구조를 제안하고, 이를 이용해 대역통과 여파기를 설계하였다. 제안된 공진기 구조는 첫 번째 층에 전송선로를 U자형으로 꺽은 헤어핀형태의 공진기를 위치시키고, 두 번째 층에는 첫 번째 층 전송선로의 끝 부분 바로 위에 broadside 결합구조를 위치시킨 형태이다. 이러한 구조는 일반적인 결합선로를 이용한 단일 층 여파기에 비해 설계변수가 다양하기 때문에 여파기 설계가 훨씬 수월하다. 본 논문에서는 강한 결합특성 때문에 광 대역 여파기에만 적용되어왔던 다층구조를 이용해 협 대역 여파기를 구현하였다. 중심주파수 4 ㎒, 부분대역폭 3 % 인 여파기를 구현하였으며, 제작과 측정을 통해 다층기판으로 협 대역 여파기를 구현 할 수 있음을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.261-262
• /
• 2006

High temperature superconducting coated conductor has multi-layer structure of protecting layer/superconducting layer/buffer layer/metallic substrate. The buffer layer consists of multi layer, and the architecture most widely used in RABiTS approach is $CeO_2$(cap layer)/YSZ(diffusion barrier layer)/$CeO_2$(seed layer). Multi-buffer layer deposition required many times and process. Therefore single buffer layer deposition study reduce 2G HTS manufacture efforts. Evaporation technique for single buffer deposition method is used for the $CeO_2$ layer. $CeO_2$ single buffer film could be achieved in the chamber. Detailed deposition conditions (temperature and partial gas pressure of deposition) were investigated for the rapid growth of high quality $CeO_2$ single buffer film.