• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.3
• /
• pp.221-230
• /
• 2004

In general, remote monitoring systems monitor the status of distributed hosts and/or applications in real-time for diverse managerial purposes. However, most of the extant systems have a few undesirable problems. First of all, they are platform-dependent and are not resilient to network and/or host failures. Moreover, they normally focus on the resource usage trends in monitored hosts, rather than on the status change of the applications running on them. We strongly believe that the latter has more direct and profound effect on the resource usage patterns on each host. In this paper, we present the design and implementation of the Remote Applications Monitoring System (RAMS) that enables us to effectively manage distributed applications through a real-time monitoring of their respective resource usages. The RAMS is a centralized system that consists of many distributed agents and a single centralized manager. An agent on each host is in charge of collecting and reporting the status of local applications. The manager handles agent registration and provides a central access point to the selection and monitoring of distributed applications. The salient features of the system include robustness and portability The adoption of JINI greatly facilitates an automatic recovery from partial network failure and host failure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1179-1185
• /
• 2005

In this paper, novel internal antenna with its controllable resonant frequency is presented for triple-band or over mobile handsets. The operating range can include GSM(880${\~}$960 MHz), GPS(1,575$\pm$10 MHz), DCS(1,710${\~}$1,880 MHz), US-PCS(1,850${\~}$l,990 MHz), and W-CDMA(1,920${\~}$2,170 MHz). The proposed antenna is realized by combination of a half wavelength loaded line and a shorted monopole. A single shorting and feeding points are used and they are common to both antenna structures. By controlling a value of lumped inductance element between shorting point and ground plane, the antenna provides enough bandwidth to cover DCS, US-PCS, and W-CDMA respectively. When these higher bands are controlled by the values of inductance, resonant characteristics in GSM and GPS bands are maintained. In this work, maximum value of the inductor is limited within 3.3 nH to mitigate gain degradation from frequency tuning. As a result, measured maximum gain of antenna is -0.58${\~}$-0.30 dBi in the GSM band, -0.57${\~}$0.43 dBi in the GPS band and 0.38${\~}$1.15 dBi in the DCS/US-PCS/W-CDMA band. In higher band, the proposed antenna is certified that resonant frequency of about 240 MHz can be effectively controlled within gain variation of about 0.77 dB by simulation and measurement.

• Therapeutic Science for Rehabilitation
• /
• v.1 no.1
• /
• pp.17-28
• /
• 2012

Objective : The purpose of this study is to assess effects of task oriented programme on balance and upper extremity function in stroke patient. Methods : The subject is right hemiplegia with stroke and participated for 6 weeks. The design of study ABA designed of single subject research. The baseline phase consisted of 5 sessions. The intervention phase consisted of 15 sessions and performed task oriented training. The Maintenance phase consisted of 5 sessions. An assessment of upper extremity function was made using a Manual Function Test(MFT) and balance were assessed by the Time Up and Go test(TUG), Nintendo Wii Balance Board Test. Results : Dynamic balance improved from 51.53 to 42.62. At baseline, difference between left and right of the static balance was an average of 13.8, After treatment, the static balance difference was 6.29 and It was closer to zero than baseline, so static balance has been stable feature. Also, MFT point increased from 6 to 7.6. Conclusion : Task oriented programme can useful in balance and upper extremity function in stroke patient. Further studies need to generalize these findings.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.824-831
• /
• 2005

Past corporaion's network security system is single security solution, or mixed several ways, but there was inefficient system because doing not get into organic link But, constructed more strong security system by ESM enterance on. ESM uses way to integrate of each agent to manage easily various kinds security solution. That is, it is system that connect system of existent VPN, FireWall, IDS and so on configurationally depending on security policy and manage. ESM is security system that is developed more than existent security system. But, practical use of network and the development speed of technology being increasing with the mon faster speed, is heightening the level more as well as dysfunction of information crime and so on. Many improvements are required at ESM system, this research wished to make up for the weak-point in the ESM system about interior security. Studied on structure of security solution that is basis of security policy. VPN, Firewall, IDS's link that is main composition of existing security system analysis, reconstructed. And supplemented security of ESM system itself. Establish imaginary intrusion and comparative analysis access data that apply each Telnet Log analysys IDS existent ESM system and proposed ESM system comparative analysis. Confirm the importance of interior security and inspected security of proposed system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.526-534
• /
• 2011

The MFS (Mlti-Functional Structure) concept, which integrates the electronics, thermal control and structure into a single packaging system, has been developed and applied to reduce the volume and weight of the satellite. Therefore, this MFS can eliminate the bulky chassis/frames, cables and connectors of the electronic equipment. The main point of this traditional MFS is the replacement of the electrical chassis/frames with MCMs (Multi-Chip Modules) that require much costs and efforts for developing. This paper shows the new MFS concept that effectively saves the volume and weight. The structure including the thermal control and radiation shielding elements will be designed and manufactured as the rectangular grid-stiffened structure. The rectangular grid-stiffened structure is the modification of the iso-grid structure, and provides the enough spaces for putting the general PCBs without the chassis/frames.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.34-45
• /
• 2004

Existing Semangeum's water balance analysis simplifies whole basin to single basin and achieved volume of effluence that produce by Kajiyama way to foundation. But Semangeum is complicated and various rice-wine strainer supply system. And there is difficulty to apply as elastic when water balance element is changed at free point. Divided to unit possession station for suitable water balance analysis model application to Semangeum in this study. And developed basin water balance model of GIS base that can do details analysis is bite about development and transfer of an appropriation in the budget of basin water resources. Achieved study including abstraction and concept design that use UML (unified modeling language) diagram for details analysis, stream network composition for rice-wine strainer supply system application, preprocessing of GIS base and postprocessing module development, model revision and verification etc. Support of this water balance analysis model is available to establish efficient water resources administration plan through outward flow process analysis of water resources. And support is considered to be possible in more convenient and, reasonable water resources administration way establishment by minimizing manual processing in systematic water resources government official to user and support diversified analysis system.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.587-590
• /
• 2013

Solid-liquid equilibria for mixtures composed of n-vinyl-2-pyrrolidone (NVP) and 2-pyrrolidone were measured as a basic study for the melt crystallization process to remove 2-pyrrolidone as impurity included in NVP. A differential scanning calorimeter (DSC) and a crystallizer were used and the experimental results obtained from two methods were similar. The mixture showed a eutectic system which has a single composition at the minimum melting temperature. Calculation results from simple thermodynamic equations were found in general agreements with present data. To determine the growth rate of NVP crystal which is important for the design of crystallization process, thicknesses of the crystal were measured with the time using a layer melt crystallizer. The growth rates increased as cooling temperatures decreased. Heat transfer coefficient correlated from present data was found to successfully describe the crystal growth behavior.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.29-36
• /
• 1999

The objective of this study is to analyse the flow field in the branching duct by visualizing the flow phenomena using the PIV system. A bifurcation model is fabricated with transparent acrylic resin to visualize the whole flow field with the PIV system. Water was used as the working fluid and the conifer powder as the tracer particles. The single-frame and two-frame methods of the PIV system and 2-frame of the grey level correlation method are applied to obtain the velocity vectors from the images captured in the flow filed. The velocity distributions in a lid-driven cavity flow are compared with the so-called standard experimental data, which was obtained from by 4-frame method in order to validate experimental results of the PIV measurements. The flow patterns of a Newtonian fluid in a branching duct were successfully visualized by using the PIV system and the sub-pixel and the area interpolation method were used to obtain the final velocity vectors. The velocity vectors obtained from the PIV system are in good agreement with the numerical results of the 3-dimensional branch flow. The results of numerical analyses and the PIV experiments for the three-dimensional flows in the branch ing duct show the recirculation zone distal to the branching point and the sizes of the recirculation length and height of the tow different methods are in good agreement.

• Smart Media Journal
• /
• v.6 no.1
• /
• pp.61-67
• /
• 2017

A large number of people living in modern times prefer remaining unmarried or living alone independently for the reason of their own will or another person's will. This is because they dislike being interfered with by other persons or because there is a financial problem. This behavior has become mainstream in persons working for professional jobs, persons having a strong disposition toward individual activity or college students. In particular, career women pursuing their own comfortable life have the tendency to prefer single life. However, sometimes, they become a target of crime that targets and makes bad use of this point. For these reasons. Consequently, sometimes, they additionally install and use a security system such as door security guard at front door and so on. It is not so difficult to lock the door security guard at the front door. However, it is apt to be forgotten. And when they are on the bedspread before falling asleep, in case they should check whether the door security guard is locked or in case they should lock it, they should get up, go to the entrance, and check and lock the door security guard. They often don't lock the door security guard due to their feeling that it is all right because of annoyance and inconvenience. This paper is intended to work for safety from crime such as illegal housebreaking by more conveniently using the door security guard after designing and implementing a system that can remotely control the door security guard, using a smartphone as a method of resolving this annoyance and keeping life more safe.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.30-36
• /
• 2019

Traditional cell culture(2-dimensional) is the method that provide a nutrient and environment on a flat surface to cultivate cells into a single layer. Since the cell characteristics of 2D culture method is different from the characteristics of the cells cultured in the body, attempts to cultivate the cells in an environment similar to the body environment are actively proceeding in the industry, academy, and research institutes. In this study, we will develop a technology to fabricate micro-structures capable of culturing cells on surfaces with various curvatures, surface shapes, and characteristics. In order to fabricate the hemispheric plastic structure(thickness $50{\mu}m$), plastic preform mold (hereinafter as "preform mold") corresponding to the hemisphere was first prepared by injection molding in order to fabricate a two - layer structure to be combined with a flat plastic film. Then, thermoplastic polymer dissolved in an organic solvent was solidified on a preform mold. As a preliminary study, we proposed injection molding conditions that can minimize X/Y/Z axis deflection value. The effects of the following conditions on the preform mold were analyzed through injection molding CAE, [(1) coolant inlet temperature, (2) injection time, (3) packing pressure, (4) volume-pressure (V/P). As a result, the injection molding process conditions (cooling water inlet temperature, injection time, holding pressure condition (V / P conversion point and holding pressure size)) which can minimize the deformation amount of the preform mold were derived through CAE without applying the experimental design method. Also, the derived injection molding process conditions were applied during actual injection molding and the degree of deformation of the formed preform mold was compared with the analysis results. It is expected that plastic film having various shapes in addition to hemispherical shape using the preform mold produced through this study will be useful for the molding preform molding technology and cast molding technology.