• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.126-133
• /
• 2016

Wireless power transfer (WPT) efficiencies for multiple-input multiple-output (MIMO) systems are formulated with a goal of achieving their maximums using Z matrices. The maximum efficiencies for any arbitrarily given configurations are obtained using optimum loads, which can be determined numerically through adequate optimization procedures in general. For some simpler special cases (single-input single-output, single-input multiple-output, and multiple-input single-output) of the MIMO systems, the efficiencies and optimum loads to maximize them can be obtained using closed-form expressions. These closed-form solutions give us more physical insight into the given WPT problem. These efficiencies are evaluated theoretically based on the presented formulation and also verified with comparisons with circuit- and EM-simulation results. They are shown to lead to a good agreement. This work may be useful for construction of the wireless Internet of Things, especially employed with energy autonomy.

• Journal of information and communication convergence engineering
• /
• 제8권5호
• /
• pp.498-501
• /
• 2010

In this paper, we extend ultra-wideband (UWB) single input single output (SISO) systems with a hybrid pulse amplitude and position modulation (PAPM) to single input multiple output (SIMO) systems using receive antenna diversity. The performance of a rake receive diversity combining scheme for UWB SIMO systems with a PAPM is examined in a log-normal multipath fading channel and also compared with that of a time-switched transmit diversity (TSTD) multiple input single output (MISO) system. It is seen that as the number of receive antennas increases, the receive diversity combining system improves the error performance. It is shown that the TSTD UWB MISO systems offer the performance equivalent to the receive diversity combining scheme for SIMO systems.

• 동력기계공학회지
• /
• 제3권4호
• /
• pp.69-78
• /
• 1999

In the single-input and single-output system, the parameter of plant is scalar polynomial, but in the multiple input and multiple output, it accompanies, being matrix polynomial, the consideration of observable controlability index or problems non-commutation in matrix polynomial as well as degree, and it is more complex to deal with. Therefore, it is thought that a full research on the single-input and single-output system is not sufficient. This paper proposes that problems of minimum variance self-tuning regulator by using numerical calculation example of multivariable system and pole assignment self-tuning regulator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.310-313
• /
• 2005

This paper is concerned with the active vibration control of beam equipped with piezoceramic sensors and actuators. The single-input and single-output positive position feedback controller is considered as an active vibration controller for the beam. The proposed single-input and single-output positive position feedback controller can cope with many modes of interest by summing each positive position feedback controller designed for each mode. In this paper, theoretical formulation is first explained in detail. We discuss how to design the single-input and single-output positive position feedback controller for a target structure by considering Euler-Bemoulli beam. It is found that the theories developed in this study are capable of predicting the control system characteristics and its performance.

• 인터넷정보학회논문지
• /
• 제14권1호
• /
• pp.1-7
• /
• 2013

본 논문은 IEEE 802.15.4 표준 기반의 Multiple Inputs Multiple Output (MIMO) 시스템에 space-time block coding (STBC) - Alamouti scheme을 적용하는 기법을 제안한다. 제안된 기법은 IEEE 802.15.4 표준을 기반으로 하는 $2{\times}1$ MISO와 $2{\times}2$ MIMO에 적용되었다. Matlab을 이용한 모의 실험을 수행하였고, 그 결과를 기존의 IEEE 802.15.4 Single Input Single Output (SISO) system과 switching diversity $1{\times}2$ Single Input Multiple Output (SIMO)와 비교하였다. 모의 실험 결과 제안된 기법은 IEEE 802.15.4 SISO 및 switching diversity 방식에 비해 더 나은 Bit Error Rate (Ber) 성능을 보이는 것을 입증하였다.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.949-954
• /
• 2017

Multiple input, multiple output orthogonal frequency division multiplexing (MIMO OFDM) systems are the candidate for the future wireless communications. However, the main drawback of MIMO OFDM systems is their sensitivity to carrier frequency offset (CFO) similar to the single input, single output OFDM (SISO OFDM) systems. The demodulation of a signal with CFO causes large bit error rate and degrade the performance of a symbol synchronizer. It is important to estimate the frequency offset and minimize or eliminate its impact. In this paper, we propose a technique based on observation training symbols for estimating CFO by employing block-by-block estimation for SISO OFDM systems. The technique of SISO OFDM is extended to the MIMO OFDM systems. Simulation results show that the proposed techniques have a superior performance and better accuracy compared to the conventional techniques in the sense of mean square error.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.999-1004
• /
• 2004

In this study, we identify contribution of structure-borne-noise of vehicle HVAC system using Multi-Dimensional spectral analysis (MDSA) method. Firstly, to identify the applicability of MDSA method, the case of HVAC system was modeled with four input / single output system. The four inputs which is given vibration data is composed of blower, evaporator, heater and duct. The single output is noise data from driver's seat. When the blower motor is operating, we analyze the contributions of four input / single output. As a result of experiment, we identify efficiency of systems modeled with four input / single output through ordinary coherence function (OCF) and multiple coherence function (MCF).

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.439-447
• /
• 2012

In this paper, an input-series auxiliary power supply scheme is proposed, which is suitable for high input voltage and multiple-output applications. The power supply scheme is based on a two-transistor forward topology, all of the series modules have a common duty ratio, all the switches are turned on and off simultaneously, and the whole circuit has a single power transformer. It does not require an additional controller but still achieves efficient input voltage sharing (IVS) for each series module through its inherent transformer-integration strategy. The IVS process of this power supply scheme is analyzed in detail and the design considerations for the related parameters are given. Finally, a 100W multiple-output auxiliary power supply prototype is built, and the experimental results verify the feasibility of the proposed scheme and the validity of the theoretical analysis.

• Journal of electromagnetic engineering and science
• /
• 제18권3호
• /
• pp.145-153
• /
• 2018

In this paper, the efficiency of single-input multiple-output (SIMO) wireless power transfer systems is examined. Closed-form solutions for the receiver loads that maximize either the total efficiency or the efficiency for a specific receiver are derived. They are validated with the solutions obtained using genetic algorithm (GA) optimization. The optimum load values required to maximize the total efficiency are found to be identical for all the receivers. Alternatively, the loads of receivers can be adjusted to deliver power selectively to a receiver of interest. The total efficiency is not significantly affected by this selective power distribution. A SIMO system is fabricated and tested; the measured efficiency matches closely with the efficiency obtained from the theory.

• 한국통신학회논문지
• /
• 제35권1C호
• /
• pp.45-54
• /
• 2010

이 논문에서는 다중사용자 (multi-user) 다중안테나 (multiple-in multiple-out : MIMO) 시스템을 위한 전송기법을 제안한다. Costa가 증명한 더티페이퍼코딩 (dirty-paper coding: DPC)이론에 따르면 송신기가 수신기의 가우시안 분포를 갖는 간섭 신호를 알고 있는 경우 간섭 신호에 상관 없이 채널 캐패시티를 얻을 수 있음이 알려져 있다. 단독사용자 채널의 경우 간단하며 효율적인 DPC기법들이 알려져 있으나 다중사용자 환경에는 실제 구현하는데 있어 복잡도와 관련해 많은 문제를 가지고 있다. 이 논문에서 우리는 다중사용자 환경에서 송신기에 알려진 갑선신호를 효율적으로 제어할 수 있는 네트워크 채널 행렬 삼각화 (network channel matrix triangulation: NMT)기법을 제안하고자 한다. 제안하는 NMT 알고리즘은 다중사용자 MIMO 채널을 서로 독립된 병렬의 Single-input Single-output (SISO) 채널들로 변환하여 단독사용자 환경을 위해 제안되어 있는 기존 DPC기법들을 다중사용자 환경에서도 사용 가능케 한다. 시뮬레이션 결과를 통해 제안된 알고리즘이 다중사용자 환경의 채널 캐패시티에 거의 접근함을 보일 것이다.