• 한국산업정보학회논문지
• /
• 제23권3호
• /
• pp.131-142
• /
• 2018

Since income growth rate and poverty level are related, there is a possibility that the poverty rate may converge in the long run steady state as well. If the poverty rate converges, then for this study the state that begins with the high poverty rate would have a higher poverty reduction rate. To examine the convergence of poverty rate among the US states, this study uses two times series methodologies. First, in order to prevent the power loss from ignoring the structural break when testing for a unit root in a single time series, this study employs the newly developed panel LM unit root tests with level and trend shifts. The results of unit root tests of the log of poverty rate without allowing for structural breaks show that twenty six states reject the null hypothesis of unit root test for the ADF test, twenty five states for the LM test, and thirty five states for the RALS-LM test. The result of unit root tests that allow one structural break shows that the null hypothesis of a unit root test is rejected for twenty two states with the LM test, and thirty three states with the RALS-LM test. This supports poverty rates are converging among US states.

• 생물환경조절학회지
• /
• 제14권1호
• /
• pp.56-62
• /
• 2005

시설참외 32공 플러그트레이 육묘시 접목방법이 따른 묘 소질과 정식 후 생육과 수량에 미치는 영향을 구명코자하였다. 접목방법은 관행의 호접과 편엽합접 및 단근편엽합접을 실시하였다. 접목 후 15일 후 묘소질은 호접이 엽수와 엽면적에서 높았으나 이후 점차 감소되어 접목 후 20일에는 초장, 경경, 엽록소함량이 비슷하였고, 접목 후 25일에는 단근편엽합접에서 초장, 엽수, 엽면적 등 지상부 생육이 가장 높았으며 지하부도 근건중이 높아 T/R율이 가장 낮은 경향을 보여 정식 전 묘 소질이 가장 좋게 나타났다. 본포 생육은 초장, 엽수, 엽면적 그리고 건물중에서 정식 후 30일 단근편엽합접이 가장 높았으며 첫 개화소요일수도 38.4일로 가장 빨랐다. 그러나 과실의 품질은 과중, 당도. 경도, 색도에서 접목방법별 차이가 없었다 따라서 접목방법의 차이가묘 소질과 정식 후 초기생육과 수량에 영향을 미치는 것으로 나타나 접목방법의 전환이 요구되는 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.596-608
• /
• 1997

The purpose of this study was to compare the apical leakage and adaptation to the dentinal wall of a glass ionomer root canal cement(Ketac-Endo) with those of AH-26 and Tubli-Seal. 102 single-rooted teeth were insrumented with step-back technique and randomly divided into four groups according to kinds of root canal cements: Ketac-Endo, AH-26, Tubli-Seal, and no root canal cement. Four experimental groups were as follows; Group 1 : Filling with gutta-percha and Ketac-Endo Group 2 : Filling with gutta-percha and AH-26 Group 3 : Filling with gutta-percha and Tubli-Seal Group 4 : Filling with gutta-percha without root canal cement All the specimens were obturated with lateral condensation technique, and stored in 100% humidity for 4 days. 20 teeth in each group were placed in centrifuge tube filled with India ink, and then centrifuged for 20 minutes at 3,000 rpm. And they were evaluated for linear dye leakage using a stereoscope and analyzed by one-way ANOVA. 22 teeth were split longitudinally and evaluated the adaptation to the dentinal wall using scanning electron microscope(4 teeth in each group) and stereoscope(2 teeth in 1, 2, 3 group). The obtained results were as follows ; 1. In case of not used root canal cement(Group 4), there was showed much degree of dye penetration comparerd with used root canal cements (Group 1, 2, 3)(P<0.01). 2. In the case of used root canal cements(Group 1, 2, 3), there was no significant difference in linear leakage in groups(P>0.01). 3. In the case of used root canal cements(Group 1, 2, 3), there was showed intimate adaptation to the dentinal wall independent on kinds of root canal cements. 4. Fractured surfaces indicated failure of cohesion in Ketac-Endo, and failure of adhesion to dentine in AH-26 and Tubli-Seal. 5. According to similar apical leakage and adaptability to the dentinal wall to another root canal cements, it is possible to be used glass-ionomer cement as root canal cement.

• 대한조선학회논문집
• /
• 제39권3호
• /
• pp.81-88
• /
• 2002

용접구조물의 루트부는 외력에 의한 응력 집중에 의해 파손되기 쉽다. 따라서 구조물의 안전성 및 신뢰성 측면에서 홈 가공한 그루브 용접에 의한 완전용입 용접이 일반적으로 요구되어진다. 하지만 필릿 T-이음부 용접은 루트부의 갭과 같은 불완전 용입부를 만들어내기 쉬움에도 불구하고 홈 가공 시간 및 용접봉 소모량을 줄이기 위해 이러한 필릿용접이 자주 행해지고 있다. 따라서, 본 연구에서는 필릿 용접구조물의 플래이트(또는 플랜지)와 웨브 부분에 발생하는 용접잔류 응력과, 특히 불완전 용입에 의한 루트부 갭을 갖는 양면 T-이음부의 노치부분에 발생하는 잔류응력 분포를 해석하고자 하였다. 해석을 위해서 서브머지드 아-크 용접에 의한 단층 및 다층패스용접 모델을 선정하였으며, 열전도 및 열탄소성 이론을 고려한 유한요소 프로그램을 사용하였다.

• Restorative Dentistry and Endodontics
• /
• 제38권3호
• /
• pp.167-171
• /
• 2013

Biomechanical preparation of root canals with accentuated curvature is challenging. New rotatory systems, such as Reciproc, require a shorter period of time to prepare curved canals, and became a viable alternative for endodontic treatment of teeth with root dilaceration. Thus, this study aimed to report a clinical case of endodontic therapy of root with accentuated dilaceration using Reciproc single-file system. Mandibular right second molar was diagnosed as asymptomatic irreversible pulpitis. Pulp chamber access was performed, and glide path was created with #10 K-file (Dentsply Maillefer) and PathFile #13, #16 and #19 (Dentsply Maillefer) up to the temporary working length. The working length measured corresponded to 20 mm in the mesio-buccal and mesio-lingual canals, and 22 mm in the distal canal. The R25 file (VDW GmbH) was used in all the canals for instrumentation and final preparation, followed by filling with Reciproc gutta-percha cones (VDW GmbH) and AH Plus sealer (Dentsply Maillefer), using thermal compaction technique. The case has been receiving follow-up for 6 mon and no painful symptomatology or periapical lesions have been found. Despite the difficulties, the treatment could be performed in a shorter period of time than the conventional methods.

• Restorative Dentistry and Endodontics
• /
• 제49권2호
• /
• pp.20.1-20.13
• /
• 2024

Objectives: This study investigated the nanoleakage of root canal obturations using calcium silicate-based sealer according to different drying methods. Materials and Methods: Fifty-two extracted mandibular premolars with a single root canal and straight root were selected for this study. After canal preparation with a nickel-titanium rotary file system, the specimens were randomly divided into 4 groups according to canal drying methods (1: complete drying, 2: blot drying/distilled water, 3: blot drying/NaOCl, 4: aspiration only). The root canals were obturated using a single-cone filling technique with a calcium silicate-based sealer. Nanoleakage was evaluated using a nanoflow device after 24 hours, 1 week, and 1 month. Data were collected twice per second at the nanoscale and measured in nanoliters per second. Data were statistically analyzed using the Kruskal-Wallis and Mann-Whitney U-tests (p < 0.05). Results: The mean flow rate measured after 24 hours showed the highest value among the time periods in all groups. However, the difference in the flow rate between 1 week and 1 month was not significant. The mean flow rate of the complete drying group was the highest at all time points. After 1 month, the mean flow rate in the blot drying group and the aspiration group was not significantly different. Conclusions: Within the limitations of this study, the canal drying method had a significant effect on leakage and sealing ability in root canal obturations using a calcium silicate-based sealer. Thus, a proper drying procedure is critical in endodontic treatment.

• 미생물학회지
• /
• 제29권2호
• /
• pp.143-147
• /
• 1991

The root nodules and Glycine max were classified as determinate nodule based on their morphological characteristics, and isolated endosymbiont as a Bradyrhizobium based on its growth rate and single subpolar flagellum. The isolate was similar to B. japonicum USDA110 in utilization of carbon source, growth at 38.deg.C and 2% NaCl, production of $H_{2}$S and especially in the restriction endonuclease digestion pattern of symbiotic genes, allowing them to be placed in sTI group together. The former, however, grew better than the later in broad pH range from 5.0 to 9.5. Infectivity and effectivity of the isolate were confirmed by inoculation of soybean seedlings with the isolates. Characteristics of the reisolated endosymbiont from induced root nodules were identical to those of the first isolate. From these results, it was confirmed that Bradyrhizobium strain isolated from the root nodules of Glycine max was a real symbiont, and was named B. japonicum SNU001.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.588.2-588
• /
• 2001

The purpose of this study was to compare ultrasonic with sonic root end preparations using anaerobic bacterial leakage model. Forty eight single rooted teeth were instrumented with Profile using crown down technique to .06 black and obturated with GP cone and AH 26 root canal sealer using warm vertical condensation technique. The apical 3mm of each root was resected. The teeth were randomly divided into two experimental groups of 20 teeth each and two control groups of four teeth as follows(omitted)

• Journal of Ginseng Research
• /
• 제8권2호
• /
• pp.82-90
• /
• 1984

The Present study was undertaken to obtain the basic information on the development of multistem varieties of ginseng. The root weight per plant of multi-stem ginseng was hi燥or than that of single stem ginseng, and it was found that the greater variance due to the growing area was clear in the frequency of multistem plant. The broad heritability estimate for the number of steams was lower with the increase of the age of ginseng. The number of stems per plant was positively correlated with the number of branch roots, number of dormancy buds, and root weight. However, the root diameter was negatively correlated with the number of stems is per plant. Based on path analysis, the number of branch roots and dormancy buds showed the maximum indirect positive effects on the number of stems.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.53-57
• /
• 1981

A total of 130 extracted human maxillary second molars were used to study the configuration of the floor of the pulp chamber. The specimens were ground and the pulp chamber was examined with a magnifier and explored with sharp explorer. The study showed the shape of the pulp chamber, number of root canals, and the type of canal orifice. The results were as follows; 1. In so far as observing the shape of the pulp chamber of the teeth, 16.9% of the teeth were quadrilateral, 70.0% were triangle and 13.1% were ovoid shape. 2. 13.1% of the specimens have 4 root canal orifices. 73.9% have 3 root canal orifices, 11.5% have 2 root canal orifices and 1.5% have single orifice. 3. 13.1% of the specimens have 2 mesio-buccal canal orifices and among the teeth those have 3 canals, 20.8% show 'Y' shape, 29.1% show straight line and 23.8% show obtuse triangle shape.