• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.689-693
• /
• 2009

We investigate the comparison of fault current characteristics between the separates three-phase flux-lock type superconducting fault current limiter(SFCL) and integrated three-phase flux-lock type superconducting fault current limiter(SFCL). The single-phase flux-lock type SFCL consists of two coils. The primary coil is wound in parallel to the secondary coil on an iron core and superconducting elements are connected to secondary coil in series. Superconducting elements are used by the YBCO coated conductor. The separated three-phase flux-lock type SFCL consists of single-phase flux-phase type SFCL in each phase. But the integrated three-phase flux-lock type SFCL consists of three-phase flux-reactors wound on an iron core. Flux-reactor consists of the same turn's ratio between coil 1 and coil 2 for each single phase. To compare the current limiting characteristics of the separated three-phase flux-lock type SFCL and integrated three-phase flux-lock type SFCL, the short circuit experiments are carried out fault condition such as the single line-to-ground fault. The experimental result shows that fault current limiting characteristic of the separated three-phase flux-lock type SFCL was better than integrated three-phase flux-lock type SFCL. And the integrated three-phase flux-lock type SFCL has an effect on sound phase.

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.673-679
• /
• 2006

A sublimation method using the SiC seed crystal and SiC powder as the source material is commonly adopted to grow SiC bulk single crystal. However, it has proved to be difficult to achieve the high quality crystal and the process reliability because SiC single crystal should be grown at very high temperature in closed system. In this study, SiC crystal boules were prepared with different angles in trapezoid-shaped graphite seed holders using sublimation physical vapor transport technique (PVT) and then their crystal quality was systematically investigated. The temperature distribution in the growth system and the crystal shape were varied with angles in trapezoid-shaped graphite seed holders, which was successfully simulated using 'Virtual Reactor'. The SiC polytype proved to be the n-type 6H-SiC from the typical absorption spectrum of SiC crystal. The micropipe densities of SiC wafers in this study were measured to be < $100/cm^2$. Consequently, SiC single crystal with large diameter was successfully achieved with changing angle in trapezoid-shaped graphite seed holders.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.54-56
• /
• 2005

In this paper, we investigated the quench characteristics of HTSC elements in the integrated three-phase flux-lock type SFCL according to fault types such as the single-line-to-ground fault, the double-line-to-ground fault, the line-to-line fault and the three-line-to-ground fault. The integrated three-phase flux-lock type SFCL was the upgrade version of the single-phase flux-lock type SFCL. The structure of the integrated three-phase flux-lock type SFCL consisted of three-phase flux-lock reactor wound on an iron core with the ratio of the same turn between coil 1 and coil 2 in each phase. When the SFCL is operated under the normal condition, the flux generated in the iron core is zero because the flux generated between two coils of each single phase is canceled out. Therefore, the SFCL's impedance is zero, and the SFCL has negligible influence on the power system. However, if a fault occurs in any single-phase among three phases, the flux generated in the iron core is not zero any more. The flux makes HTSC elements of all phases quench irrespective of the fault type, which reduces the current of fault phase as well as the current of sound phase. It was observed that the fault current limiting characteristics of the suggested SFCL were dependent on the quench characteristics of HTSC elements in all three phases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.960-962
• /
• 2005

In this paper, we investigated the quench characteristics of high-Tc superconducting(HTSC) elements in the integrated three-phase flux-lock type superconducting fault current limiter(SFCL) according to fault types such as the single-line-to-ground fault, the double-line-to-ground fault, the line-to-line fault and the triple-line-to-ground fault. The integrated three-phase flux-lock type SFCL is an upgrade version of single-phase flux-lock type SFCL. The structure of the integrated three-phase flux-lock type SFCL consisted of a three-phase flux-lock reactor wound on an iron core with the ratio of the same turn between coil 1 and coil 2 in each phase. When the SFCL is under the normal condition, the flux generated in the iron core is zero because the flux generated between two coils of each single phase is canceled out. Therefore, the SFCL's impedance is zero, and the SFCL has negligible influence on the power system. However, if a fault occurs in any single one of three phases, the flux generated in the iron core is not zero any more. The flux makes HTSC elements of all phases to quench irrespective of the fault type, which reduces the current in fault phase as well as the current of sound phase. It was obtained that the fault current limiting characteristics of the suggested SFCL were dependent on the quench characteristics of HTSC elements in all three phases.

• 에너지공학
• /
• 제23권2호
• /
• pp.42-48
• /
• 2014

미분탄의 연소 또는 열분해 과정으로부터 발생하는 tar-soot는 복사 열전달 및 질소산화물의 추가적인 발생 원인이라는 관점에서 의미 있게 다루어지고 있다. 최근 저열량탄이 증가함에 따라 시멘트의 원료로 재활용되던 석탄회에서 다량의 미연분과 tar-soot가 포함되어 오히려 다시 반입되는 사례가 빈번해지고 있다. 따라서 본 연구에서는 저열량탄 사용 확대에 따른 혼탄연소 조건에서 tar-soot의 배출특성을 살펴보기 위해 반응기로써 LFR(Laminar Flow Reactor)을 적용하였으며, 연료로는 현재 국내발전소에서 사용 중인 역청탄 2종(MOUNTAIN, MACARHTUR)과 아역청탄(KPU)을 이용하여 단탄별 tar-soot 배출특성과 혼소비에 따른 배출특성을 화염의 구조 변화와 함께 측정하였다. 휘발분이 많은 아역청탄의 soot cloud 길이는 역청탄에 비해 길었지만 전체적인 화염 길이는 짧아졌다. 단탄별 실험결과에서는 역청탄의 tar-soot 발생량이 아역청탄의 발생률보다 높았으며 역청탄 중 휘발분 함량이 많은 MOUNTAIN탄이 상대적으로 휘발분 함량이 적은 MACARHTUR탄의 tar-soot 발생률보다 높았다. 혼소시에는 단탄의 연소특성과는 다른 새로운 특성을 나타내었으며 저열량탄과 혼소되는 역 청탄의 종에 따라 tar-soot 발생량이 지배되는 것을 확인하였으나 혼소비에 따른 평균적 특성이 아닌 완전히 차별되는 배출특성을 나타냄에 따라 석탄의 등급에 따라 최적의 혼소비를 찾아서 연소시키는 것이 tar-soot 발생량을 줄일 수 있는 방법임을 의미한다.

• 에너지공학
• /
• 제23권4호
• /
• pp.95-105
• /
• 2014

CUPID 코드는 기기 스케일(Component scale)의 2상 유동(Two-phase flow) 해석 코드로서 다양한 2상 유동 조건의 실험 자료를 이용하여 검증되어 왔다. 특히, CUPID 코드의 CANDU형 원자로 감속재 탱크 내부 유동 해석능력을 평가하기 위해 1/4 규모 축소 실험장치의 실험결과를 이용하여 검증한 바가 있다. 본 연구에서는 이전 연구를 바탕으로 CUPID 코드를 사용하여 실제 원자로 감속재탱크 내부의 열수력 거동을 해석하였다. 감속재 탱크의 내부 구조는 아주 복잡하기 때문에 다공질 매질 방법을 적용하였으며 탱크 입구노즐 또한 기기 스케일 코드의 취지에 부합하게 아주 단순화하여 모델하였다. 해석결과의 정확성을 결정하는 가장 중요한 요소는 입구노즐의 모델 방법에 있는 것으로 나타났다. 입구노즐을 단순하게 모델하여 입구유량을 경계조건으로 부여하고 발전소 정상운전조건으로 계산한 결과, 부력에 의한 열성층화 현상이 발생하였다. 이는 전혀 타당하지 않은 것으로 입구 유동의 모멘텀을 정확하게 모의하지 않아 발생한 것이 나타났다. 이를 개선하고자 입구 유량과 운동량을 동시에 보존시킬 수 있도록 입구 노즐 면적을 축소하고 속도는 증가시켜서 계산한 결과, 사실적인 내부 유동장을 얻을 수 있었다. 결론적으로 계산 비용효과가 뛰어난 다공질 매질 방법에 입각하여 CUPID 코드를 실규모 감속재 탱크 열유동 해석에 적용할 수 있음을 보였고, 입구노즐의 적절한 모델이 가장 중요한 요소임을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권1호
• /
• pp.40-49
• /
• 2001

We have developed a repeatable process of forming uniform, small-size and high-density self-assembled Si nano-crystals. The Si nano-crystals were fabricated in a conventional LPCVD (low pressure chemical vapor deposition) reactor at $620^{\circ}c$ for 15 sec. The nano-crystals were spherical shaped with about 4.5 nm in diameter and density of $5{\times}l0^{11}/$\textrm{cm}^2$. More uniform dots were fabricated on nitride film than on oxide film. To take advantage of the above-mentioned characteristics of nitride film while keeping the high interface quality between the tunneling dielectrics and the Si substrate, nitride-oxide tunneling dielectrics is proposed in n-channel device. For the first time, the single electron effect at room temperature, which shows a saturation of threshold voltage in a range of gate voltages with a periodicity of ${\Delta}Ｖ_{GS}\;{\approx}\;1.7{\;}V$, corresponding to single and multiple electron storage is reported. The feasibility of p-channel nano-crystal memory with thin oxide in direct tunneling regime is demonstrated. The programming mechanisms of p-channel nano-crystal memory were investigated by charge separation technique. For small gate programming voltage, hole tunneling component from inversion layer is dominant. However, valence band electron tunneling component from the valence band in the nano-crystal becomes dominant for large gate voltage. Finally, the comparison of retention between programmed holes and electrons shows that holes have longer retention time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1999-2000
• /
• 2011

본 연구의 목적은 발전소의 정상적인 출력운전을 위해 필요한 주요 계통의 기능에 영향을 미쳐 발전소 불시정지를 유발할 수 있는 핵심 기기, 즉, 발전정지유발기기의 설치 개소를 체계적인 방법을 통하여 정밀 분석하고, 해당 기기의 고장모드와 그 영향을 검토하여 이를 방지하기 위한 대책을 수립하도록 하는 것이다. 발전정지유발기기의 평가는 발전소 종사자로 하여금 가동 중 발전소에서 발생 가능한 발전정지 영향기기와 그들의 상호관계를 이해하고, 정량적 평가를 통해 해당기기들의 발전소 발전정지 영향을 시각적으로 확인하여 불시 발전정지를 예방할 수 있는 대응 논리를 인지할 수 있도록 하는데 그 목적이 있다. 원자로냉각재계통에 대한 발전정지유발기기(SPV, Single Point Vulnerability)를 분석하기 위해 고장모드영향분석(FMEA, Failure Mode Effect Analysis)을 수행하고 상세 고장수목을 개발하여 통합단위의 계통 분석을 수행하였다. 분석결과 원자로냉각재계통의 발전정지유발기기는 원자로냉각재 펌프와 가압기 주살수 밸브의 제어회로에 집중되어 있는 것으로 나타났다.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.71-77
• /
• 2016

The CUPID code is a transient, three-dimensional, two-fluid, thermal-hydraulic code designed for a component-scale analysis of nuclear reactor components. The primary objective of this study is to assess the applicability of CUPID to single-phase turbulent flow analyses of $2{\times}2$ rod bundle subchannel. The bulk velocity at the inlet varies from 1.0 m/s up to 2.0 m/s which is equivalent to the fully turbulent flow with the range of Re=12,500 to 25,000. Adiabatic single-phase flow is assumed. The velocity profile at the exit region is quantitatively compared with both experimental measurement and commercial CFD tool. Three different boundary conditions are simulated and quantitatively compared each other. The calculation results of CUPID code shows a good agreement with the experimental data. It is concluded that the CUPID code has capability to reproduce the turbulent flow behavior for the $2{\times}2$ rod bundle geometry.

• Journal of Microbiology and Biotechnology
• /
• 제4권3호
• /
• pp.204-209
• /
• 1994

The synthesis of N-(benzyloxycarbonyl)-L-aspartyl-L-phenylalanine methylester (Z-APM), a precursor of aspartame, from N-(benzyloxycarbonyl)-L-aspartic acid (Z-Asp) and L-phenylalanine methylester hydrochlolide($L-PM\cdot HCI$) was investigated in a saturated-ethylacetate single phase system using immobilized thermolysin. Among the various supports tested, glyceryl-CPG was found to be most efficient for retaining enzyme activity. The enzyme immobilized onto glyceryl-CPG also showed the highest activity for Z-APM synthesis in saturated ethyl acetate. Z-APM conversion yield in saturated ethylacetate was half of that obtained in an ethyl acetate-buffer two-phase system under the same reaction conditions. However, as the mole ratio of $L-PM \cdot HCI$ to Z-Asp was increased to 4.0, the conversion yield reached 95 %. When continuous synthesis of Z-APM was canied out in a plug flow reactor (PFR) with 80 mM of L-PMㆍHCI and 20 mM of Z-Asp in saturated ethylacetate (pH 5.5), more than 95 % of Z-Asp was converted to Z-APM with a space velocity of 1.16 $hr^{-1} at 40^{\circ}C$. Although the operational stability in PFR was reduced rapidly, more than 80% of initial activity was maintained in CSTR even after a week of operation.