• 제목/요약/키워드: Single reactor

검색결과 398건 처리시간 0.028초

수중에서 구형 유전체와 단층 절연 방전관의 전계 분포 시뮬레이션 (The Simulation of Electric Field Distribution of Dielectric Tube with Single Layer and Globular Dielectric in Water)

  • 이동훈;박재윤;이재동;박홍재;고희석
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
    • /
    • pp.1119-1122
    • /
    • 2003
  • In this paper, the electric field distribution in dielectric tube with one layer and spherical dielectric in water was simulated. The reactor was made up of the spherical dielectric that is diameter 2.5[mm], ${\epsilon}_r$ : 5, 100, 1000, 5000 respectively and one glass plate being 2[mm] thickness, ${\epsilon}_r$ : 5 as electrode. The discharge gap was 7[mm]. As a result of the simulation, in case of being about the same value between the dielectric constant of spherical dielectric and water, when the reactor was applied to high voltage dielectric polarization characteristic was trending toward disappearance. To get more strong electric field, the dielectric constant should be higher comparatively, Increasing the spherical dielectric constant, the location of equippotential line was shifting from the interior to the exterior.

  • PDF

유동층반응기에서 촉매를 이용한 메탄 열분해 (Thermal Decompostion of Methane Using Catalyst in a Fluidized Bed Reactor)

  • 장현태;이지윤;차왕석
    • 한국산학기술학회논문지
    • /
    • 제9권2호
    • /
    • pp.487-492
    • /
    • 2008
  • 본 논문은 유동층반응기에서 메탄 열분해에 의한 수소 생산과 탄소 생성에 대한 연구를 수행하였다. 환경에 대한 영향을 최소화한 상태에서 one-step에 의한 메탄의 전환반응을 메탄 분해촉매활성에 영향을 미치는 인자에 대하여 연구하였다. 측정된 압력요동특성치의 해석을 통하여 유동층 열분해촉매의 유동화현상을 측정하였으며, 유동화특성에 따른 메탄열분해능을 측정하였다. 메탄의 분해능는 생성되는 수소의 농도로부터 측정하였다. 유동층의 특성인 층내 입자 이동성, U-Umf, 마모, 비산유출, 유동화가스의 효율밀도에 따른 분해효율에 미치는 영향을 고찰하였다.

광학모델을 이용한 자외선 접촉조 최적 설계에 관한 연구 (A Study on Optimal Design of UV Contactor using an Optical Radiation Model)

  • 최영균;김두일;김성홍
    • 한국물환경학회지
    • /
    • 제25권4호
    • /
    • pp.547-552
    • /
    • 2009
  • Because of refractory property of light, the travel path of UV light becomes longer than the straight line and shorter solely in water as UV light passes sequentially through air, quartz and water. Note that water significantly absorbs UV light. Hence, UV intensity shall be estimated to be lower when refraction is neglected than it is considered. Reflection is also critical for the design of UV radiation system. While the reflection at the interface of air and quartz is low enough to ignore, it is too high to be ignored at the interface of quartz and water. Assuming constant power, smaller length to width ratio of UV reactor is beneficial and single-lamp system is preferred to multi-lamps. Under the given cross section, optimal lamp positions could be decided. For example of an elliptical reactor with dual lamps, the optimal lamp locations shall be the 1/3 and 2/3 position of the longer axis.

변형된 활성슬러지공법의 폐수처리에 관한 실험적 연구 (An Experimental Study on Wastewater Treatment by Modified Activated Sludge Process)

  • 채수권;연기석
    • 물과 미래
    • /
    • 제22권1호
    • /
    • pp.117-125
    • /
    • 1989
  • 본 연구는 활성슬러지공법을 변형시킨 무산소일염기일호기반응조를 사용해서 질산화일탈질소반응 및 인의 방출인초과축적반응을 유도하여 합성페수의 유기물, 질소 및 인을 동시에 제거하였다. 무질소조, 무염기 및 호기호 각각에 대한 반응특성을 조사하기 위해 실험실규모의 반응조가 운영되었으며 MLSS농도를 5000, 4200, 3300, 2600, 1900mg/l로, 변화시켜 COD제거율에 대한 생물학적 동력학계수를 결정하였다. 연구결과, 유기물 및 영양염이 변형된 슬러지공법에 의해 동시에 제거될 수 있음을 알았고, ortho-p 제거효율은 66%∼99%로 높게 나타났다.

  • PDF

고정층 반응기에서 DME 직접합성에 관한 실험 연구 (The Experimental Study on the Direct Synthesis of DME (Dimethyl Ether) in the Fixed Bed Reactor.)

  • 최창우;조원일;주우성;이승호;백영순;노경호
    • 한국수소및신에너지학회논문집
    • /
    • 제15권4호
    • /
    • pp.283-290
    • /
    • 2004
  • The single-step process for conversion of syngas to DME give higher conversion than the syngas-to-methanol process. This arises because of a synergy among the three simultaneous reaction, methanol synthesis, methanol dehydration and water gas shift reaction, in the process. we would find the optimal condition of the process which these advantages. The optimal condition of DME synthesis reaction over a commercial $Cu/Zn/Al_2O_3$ catalyst and Hybrid catalyst in a fixed bed reactor. The syngas-to-dimethyl ether conversion was examined on various reaction condition (Temperature 473~553K, $H_2/CO$ ratio 1~3, Pressure 30'50atm, GHSV 1000~4000).

ACCURACY AND EFFICIENCY OF A COUPLED NEUTRONICS AND THERMAL HYDRAULICS MODEL

  • Pope, Michael A.;Mousseau, Vincent A.
    • Nuclear Engineering and Technology
    • /
    • 제41권7호
    • /
    • pp.885-892
    • /
    • 2009
  • This manuscript will discuss a numerical method where the six equations of two-phase flow, the solid heat conduction equations, and the two equations that describe neutron diffusion and precursor concentration are solved together in a tightly coupled, nonlinear fashion for a simplified model of a nuclear reactor core. This approach has two important advantages. The first advantage is a higher level of accuracy. Because the equations are solved together in a single nonlinear system, the solution is more accurate than the traditional "operator split" approach where the two-phase flow equations are solved first, the heat conduction is solved second and the neutron diffusion is solved third, limiting the temporal accuracy to $1^{st}$ order because the nonlinear coupling between the physics is handled explicitly. The second advantage of the method described in this manuscript is that the time step control in the fully implicit system can be based on the timescale of the solution rather than a stability-based time step restriction like the material Courant limit required of operator-split methods. In this work, a pilot code was used which employs this tightly coupled, fully implicit method to simulate a reactor core. Results are presented from a simulated control rod movement which show $2^{nd}$ order accuracy in time. Also described in this paper is a simulated rod ejection demonstrating how the fastest timescale of the problem can change between the state variables of neutronics, conduction and two-phase flow during the course of a transient.

Effects of ultrasound coupled with potassium permanganate pre-treatment of sludge on aerobic digestion

  • Demir, Ozlem
    • Advances in environmental research
    • /
    • 제5권4호
    • /
    • pp.251-262
    • /
    • 2016
  • The biodegradability and decomposition efficiencies increase with the pre-treatment of sludge in a digestion process. In this study, the feasibility of ultrasound coupled with potassium permanganate oxidation as a disintegration method and digestibility of aerobic reactor fed with disintegrated sludge with ultrasound coupled potassium permanganate were investigated. The first stage of the study focused on determining the optimum condition for ultrasonic pre-treatment for achieving better destruction efficiency of sludge. The second part of the study, the aerobic digestibility of sludge disintegrated with ultrasound and potassium permanganate oxidation alone and combined were examined comparatively. The results showed that when 20 min of ultrasonic pre-treatment applied, the specific energy output was 49384 kJ/kgTS with disintegration degree of 58.84%. During the operation of aerobic digester, VS/TS ratios of digesters fed with disintegrated sludge decreased indicating that disintegration methods could obviously enhance aerobic digestion performance. The highest reduction in volatile solids was 75% in the digester fed with ultrasound+potassium permanganate disintegrated sludge at the end of the operation compared to digester fed with raw sludge. Total Nitrogen (TN) and Total Phosphorus (TP) levels in sludge supernatant increased with this combined method significantly. Besides, it promoted the production of ${\bullet}OH$, thus enhancing the release of Carbon (C), Nitrogen (N) and Phosphorus (P) from the sludge. Disintegration with all methods used in this study could not improve Capillary Suction Time (CST) reduction in disintegrated digesters during the operation. The results demonstrated that the combined ultrasound treatment and potassium permanganate oxidation method improves the biodegradability compared to control reactor or their single application.

가압경수형 원자로 부하추종 운전시 제논진동 최적화 (Optimization for Xenon Oscillation in Load Following Operation of PWR)

  • 김건중;오성헌;박인용
    • 대한전기학회논문지
    • /
    • 제38권11호
    • /
    • pp.861-869
    • /
    • 1989
  • 본 논문에서는 폰트라이긴의 최대원리를 이용한 가압경수형 원자로(PWR)의 부하추종 운전시 제논진동 최적화 문제가 제시되었다. 최적화 모델은 2차 목적함수를 갖고 있는 최적 추적제어문제로 정식화 하였으며, 1군 확산방정식과 제논-아이오다인 동특성 방정식을 등호 제약조건으로 고려하였다. 최적화 모델에 최대원리를 적용하므로서, 문제는 제약조건이 없는 단일시간 문제로 분리되었으며, 분리된 부 문제는 공액 경사법을 이용하여 최적화 하였다. 계산결과는 제논진동이 최소화되어 원자로가 규정된 출력분포를 유지하면서 전력계총에서 요구하는 출력을 잘 추종 하였다.

퇴비 및 폐타이어 Granule을 이용한 악취 제거 (Odor Removal by Using Compost and Granular Scrap Tires)

  • 정윤진
    • 상하수도학회지
    • /
    • 제13권1호
    • /
    • pp.43-50
    • /
    • 1999
  • In spite of low energy requirement, and operation and construction cost, biofilters with soil beds have not been operated efficiently. Because of excess moisture in winter and rainy periods, saturated pores in the bed prevent passage and sorption of odorous compounds. Sometimes this results in septic conditions that release previously sorbed and oxidized sulfur. Therefore, an economical and effective alternative needs to be developed. The objectives of this study were to confirm applicability of the granular scrap tires with compost for treating odorous gas as well as to obtain optimum design parameters for proposed system. In lab-scaled test, multiple stage reactors had lower headloss than a single stage reactor and less headloss was occurred for the gas with higher moisture content. For practical purpose, pilot-scaled reactor was operated to remove odor from septic tank, manure and animal wastewater treatment plant and composting machine. According to the results of pilot scaled test, $H_2S$ can be always removed completely and ammonia/amine can be removed excellently when proper moisture content is provided. The results from lab and pilot test showed that granular scrap tire could be replaced with soil as supporting material for biofilter showed excellent drainage because of its ability to reject moisture.

  • PDF

전철 지중배전선로의 충전전류보상에 관한 연구 (A Study of the Charging Current Effect on Underground Distribution Line in Electric Railway)

  • 김양수;장우진
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 추계학술대회 논문집
    • /
    • pp.214-218
    • /
    • 2008
  • Because on the high-tension underground distribution line of an electric railway high voltage XLPE Cable two or three circuits between railway stations with a standard as receiving transformer facilities are established at a $30km{\sim}50km$ interval, reactive power in which the phase of a current is larger than that of a voltage is supplied when trains are not working, so when there are no loading or low loading as night. Due to the long-distance trend of the underground distribution system on an alternating current railway distribution line, the terminal voltage of a transformer is over the standard voltage, and after all, commercial cycle overvoltage is continued. To solve this problem, the shunt reactor is installed in middle of power distribution lines to maintain receiver voltage meted under the allowance regulation through control of the reactive power. Also, in case that the thickness of single cable is over $60mm^2$ and length of line is about over 30km, a circuit breaker is broken by shorting shunt ability of charging current in excess of shunt current(31.5A.rms). Therefore, this thesis presents installing the location of shunt reactor for quantitative analysis by using optimum algorism for compensation and control of the charging current.

  • PDF