• 융합신호처리학회논문지
• /
• 제8권1호
• /
• pp.15-21
• /
• 2007

본 논문에서는 비등속 이동물체의 표면 검사를 위한 3차원 표면 모델링(modeling) 기법을 제안하였다. 레이저 라인을 물체에 조사하면 표면의 굴곡에 따라 라인에 휨 현상이 나타난다. 이를 분석하여 물체 표면에 대한 3차원 정보를 획득 할 수 있다. 기존의 단일 라인(single stripe) 기법의 정확성과 단일 프레임(single frame) 기법의 빠른 복원 속도의 장점을 모두 활용하기 위하여 멀티 레이저 라인 투사기법을 이용하였다. 정확한 레이저 라인의 추출을 위하여 이진화 및 채널별 에지 검출 기법을 소개하였고, 효과적인 레이저 각 라인의 라벨링 기법을 새로 제안하였다. 개별 3차원 복원 표면을 전체영상으로 합성하기 위해 영상간 특징점 매칭(matching)을 활용하여 동기화 정보를 획득하고 영상을 정합하였다. 본 알고리듬을 컨테이너 표면 데미지 검사에 활용하여 제안한 3차원 모델링 기술의 우수성을 확인하였다.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.692-700
• /
• 2013

This paper discusses the design of a novel synchronous reference frame (SRF) method that can extract the reference compensating current for single-phase shunt active power filters (APFs). Unlike previous SRF studies, the proposed method has an innovative feature that does not require a fictitious current signal. Other key features of the proposed strategy include frequency-independent operation, accurate reference current extraction, and relatively fast transient response. The effectiveness of the proposed method is investigated by conducting a detailed mathematical analysis. Results of the analysis confirm the superior performance of the suggested approach. Theoretical evaluations are confirmed by the experimental results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.50-57
• /
• 1995

Cylindrical space frame which have a mechanic property, a functional property, a aesthetic prioerty and so on, occupies one part of sin structures and after this, the using parts will be extended. But because this structure is made of network by combination of line elements there are many nodes the structural the structural behavior is very complicated and there can be a overall collapse of structure by buckling phenomenon if the external force reaches a limitation. In design for this structure, we must determinate layer by considering above mentioned property first of all. Therefore this study aimed at the comparison and the investigation of mechanical characteristics of single-layer and double-layer cylindrical space frame on views of behavior and buckling by use of rise ratio.

• Structural Engineering and Mechanics
• /
• 제31권4호
• /
• pp.423-437
• /
• 2009

In order to perform a step-by-step force-displacement response analysis or dynamic time-history analysis of large buildings with masonry infilled R/C frames, a continuous force-deformation model based on an equivalent strut approach is proposed for masonry infill panels containing openings. The model, which is applicable for degrading elements, can be implemented to replicate a wide range of monotonic force-displacement behaviour, resulting from different design and geometry, by varying the control parameters of the model. The control parameters of the proposed continuous model are determined using experimental data. The experimental program includes fifteen 1/3-scale, single-story, single-bay reinforced concrete frame specimens subjected to lateral cyclic loading. The parameters investigated include the shape, the size, the location of the opening and the infill compressive strength. The actual properties of the infill and henceforth the characteristics needed for the diagonal strut model are based on the assessment of its lateral resistance by the subtraction of the response of the bare frame from the response of the infilled frame.

• Structural Engineering and Mechanics
• /
• 제70권4호
• /
• pp.421-429
• /
• 2019

This paper presents an analytical model for the estimation of initial lateral stiffness of steel moment resisting frames with masonry infills. However, rather than focusing on the single bay-single storey substructure, the developed model attempts to estimate the global stiffness of multi-storey and multi-bay frames, using an assembly of equivalent springs and taking into account the shape of the lateral loading pattern. The contribution from each infilled frame panel is included as an individual spring, whose properties are determined on the basis of established diagonal strut macro-modeling approaches from the literature. The proposed model is evaluated parametrically against numerical results from frame analyses, with varying number of frame stories, infill openings, masonry thickness and modulus of elasticity. The performance of the model is evaluated and found quite satisfactory.

• 센서학회지
• /
• 제27권3호
• /
• pp.165-169
• /
• 2018

A single-axis Cubli frame realized simply with an IMU sensor and DC motor is presented herein. To maintain the balance on the Cubli frame, an LQR controller based on a Lagrangian derivation of the dynamics was designed, which utilized the state variables of the frame angle and its angular acceleration, as well as the wheel angle and its angular acceleration. The designed LQR controller showed a settling time balancing capability of approximately two seconds and 40% of the maximum overshoot in Matlab/Simulink simulations. Our experimental results of the fabricated Cubli frame matched with the simulation results. It maintained balancing at the reference position even though an initial offset as well as external disturbance during the balancing was applied.

• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.321-335
• /
• 2009

When a roof frame is subjected to the airblast loading, the conventional way to analyze the damage of the frame or design the frame is to use single degree of freedom (SDOF) model. Although a roof frame consists of beams and girders, a typical SDOF analysis can be conducted only separately for each component. Thus, the rigid body motion of beams by deflections of supporting girders can not be easily considered. Neglecting the beam-girder interaction in the SDOF analysis may cause serious inaccuracies in the response values in both Pressure-Impulse curve (P-I) and Charge Weight-Standoff Diagrams (CWSD). In this paper, an inelastic two degrees of freedom (TDOF) model is developed, based on force equilibrium equations, to consider beam-girder interaction, and to assess if the modified SDOF analysis can be a reasonable design approach.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1212-1221
• /
• 1993

The shape optimization procedure applying finite element method was carried out for the specific purpose of analysis of a tractor chassis frame. Minimization of the mass as an objective function is executed under multiple constrained conditions of nodal displacements and stresses. The optimization process executions were succeeded in converging into single optimum solution. Although mass reduction and stress alleviation were attained by 40% and 26 to 24% respectively , the geometry of the shape is so complicated for fabrication that the refinement of the geometry is of necessity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.98-102
• /
• 2006

Historically, LCD monitors have not been able to be used for frame-sequential stereoscopic 3D visualisation due to their slow pixel response rate. With LCD pixel response rates now in the single-digit millisecond range it is natural to ask whether it is now possible to achieve frame-sequential stereoscopic 3D viewing on LCDs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권1호
• /
• pp.22-28
• /
• 2015

This paper proposes column-parallel three step Single Slope Analog-to-Digital Converter (SS-ADC) for high frame rate VGA CMOS Image Sensors (CISs). The proposed three step SS-ADC improves the sampling rate while maintaining the architecture of the conventional SS-ADC for high frame rate CIS. The sampling rate of the three-step ADC is increased by a factor of 39 compared with the conventional SS-ADC. The proposed three-step SS-ADC has a 12-bit resolution and 200 kS/s at 25 MHz clock frequency. The VGA CIS using three step SS-ADC has the maximum frame rate of 200 frames/s. The total power consumption is 76 mW with 3.3 V supply voltage without ramp generator buffer. A prototype chip was fabricated in a $0.13{\mu}m$ CMOS process.