• Journal of the Korean Society for Heat Treatment
• /
• v.13 no.5
• /
• pp.324-329
• /
• 2000

Microstructure, mechanical and fatigue behaviors of TiCN and TiN/TiCN thin films, deposited on quenched and tempered STD61 tool steel, were investigated by using XRD, XPS, hardness, adhesion and fatigue tests. The TiCN thin film is grown along the (100), (111) orientation, whereas the TiN/TiCN thin film is grown along the (111) orientation. The preferred orientation of TiN/TiCN thin film strongly depends on the TiN buffer layer whose orientation is (111), as is well-known. The TiN/TiCN thin film showed the higher adhesion compared with TiCN single layer because the TiN buffer layer, having good toughness, reduces the effects of the lower hardness of substrate. In the high cycle tension-tension fatigue test, the fatigue life of the TiCN and the TiN/TiCN coated steel increased approximately two to four times and five to nine times respectively compared with uncoated specimens. The TiN buffer layer in multilayer thin films plays an important role in reducing residual stress and fatigue crack initiation, and then in restraining the fatigue propagation.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.129-132
• /
• 2003

Yttria stabilized zirconia (YSZ) buffer layers were deposited by a metal organic chemical vapor deposition (MOCVD) technique using single liquid source for the application of YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) coated conductor. Y:Zr mole ratio was 0.2:0.8, and tetrahydrofuran (THF) was used as a solvent. The (100) single crystal MgO substrate was used for searching deposition condition. Bi-axially oriented CeO$_2$ and NiO films were fabricated on {100}〈001〉 Ni substrate by the same method and used as templates. At a constant working pressure of 10 Torr, the deposition temperatures (660~80$0^{\circ}C$) and oxygen flow rates (100~500 sccm) were changed to find the optimum deposition condition. The best (100) oriented YSZ film on MgO was obtained at 74$0^{\circ}C$ and $O_2$ flow rate of 300 sccm. For YSZ buffer layer with this deposition condition on CeO$_2$/Ni template, full width half maximum (FWHM) values of the in-plane and out-of-plane alignments were 10.6$^{\circ}$ and 9.8$^{\circ}$, respectively. The SEM image of YSZ film on CeO$_2$/Ni showed surface morphologies without microcrack.k.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.280-288
• /
• 1988

Lime requirement determination methods were experimentally compared and evaluated for the soils with different physico-chemical properties. The selected soils were mainly distributed in paddy field of Kangweon-Province; Anmi series from limestone region, Dongsong series from basalt region, Gyuam and Gangseo series from alluvial soil. The results were as follows: 1. Differences of soil lime requirement among seven methods ($CaCO_3$ incubation method, $BaCl_2$-TEA method, SMP-single buffer method, Double buffer method, Adams and Evans method, SMP-double buffer method, and O. R. D. method) were remarkably appeared. 2. Measuring lime values by $CaCO_3$ incubation method which is fixed on the basis of lime requirement, SMP-double buffer method was most acceptable for selected soils except Gyuam series, while $BaCl_2$-TEA method showed the highest value, and O. R. D. method was the lowest. 3. Exchangeable Al content of soils was neutralixed near to 70%, but 30% of extractable reached to neutralize when incubated with 100% lime equivalence. 4. Lime requirements based on exchangeable and extractable Al contents of soils were lower than that of $CaCO_3$ incubation method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.407-410
• /
• 1997

This paper analytically derives the variance of service time of a station in the symmetric IEEE 802.4 token bus network with single access class and finite buffer capacity. This performance measure is represented in terms of the total number of stations, the token hold time, the arrival rate of frames, the service rate, and other parameters. Using computer simulations, presented performance measure is validated.

• IE interfaces
• /
• v.14 no.4
• /
• pp.334-340
• /
• 2001

The theory of constraints (TOC) has become a valuable system in modern operations management. Using the ideas and methods of the TOC, companies can achieve a large reduction of work-in-process and finished-goods inventories, significant improvement in scheduling performance, and substantial earnings increase. The purpose of this paper is to calculate the optimal size of the time buffer which is used to accommodate disruptions in production processes and provide maximum productivity of capacity constrained resources. After the problem formulation in terms of single server queueing model, we observed the system behavior by sensitivity analyses.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.476-480
• /
• 2002

The theory of constraints (TOC) has become a valuable system in modern operations management. Using the ideas and methods of the TOC, companies can achieve a large reduction of work-in-process and finished-goods inventories, significant improvement in scheduling performance, and substantial earnings increase. The purpose of this paper is to calculate the optimal size of the time buffer which is used to accommodate disruptions in production processes and provide maximum productivity of capacity constrained resources. After the problem formulation in terms of single server queueing model, we observed the system behavior by sensitivity analyses.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.34-40
• /
• 2006

Multiple wireless devices in wired and wireless heterogeneous networks communicate with counterparts via a single Access Point (AP). In this case, the AP becomes a bottleneck of the network, therefore buffer overflows occur frequently and result in TCP performance degradation. In this paper, the new algorithm that prevents buffer overflows at AP and enhances TCP fairness is proposed. Depending on the buffer usage of AP, the new algorithm adaptively controls each TCP senders' transmission rate, prevents buffer overflows and thus guarantees improved TCP fairness. It is proved that the algorithm makes better of TCP throughput and fairness by preventing buffer overflows.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.10
• /
• pp.24-33
• /
• 2001

Delay, delay variation and packet loss rate are principal QoS(Quality of Service) elements of packet communication. This paper proposes a new buffer allocation mechanism to improve the packet loss performance in such a situation that multiple logical buffers share a single physical memory buffer. In the proposed buffer allocation mechanism, the movement of dynamic threshold follows a curved track instead of a straight line which is used in the DT(dynamic threshold) mechanism. In order evaluate the effectiveness of the proposed mechanism, it is compared with the existing previously proposed mechanisms in several aspects including NC(no control), ST(Static Threshold) and DT mechanisms.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.33-40
• /
• 2016

Coupling systems under train's collision should take the impact by absorbing the impact energy caused from the collision, so the systems are very important parts for the safety of the trains. However, it is not easy to evaluate the performance of the system because it requires a huge testing facility, which is able to control the impact and to handle many safety issues. In this paper, test results are provided, which are obtained from collision tests of a single train having a coupling system in the front, and the results are analyzed in order to understand the characteristics and the dynamic behaviors of energy absorbing materials in the coupling system, such as a hydraulic buffer, and two rubber buffers. The results show that the force of each component could be empirically described by the compression displacement and velocity. The analyzed results will be applied to simulation models, and advanced studies wouuld be available if the simulation models are well validated with the test results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.899-902
• /
• 2005

Pipeline hazard due to branch instructions is the major factor of the degradation on the performance of microprocessors. Branch target buffer predicts whether a branch will be taken or not and supplies the address of the next instruction on the basis of that prediction. If the branch target buffer predicts correctly, the instruction flow will not be stalled. This leads to the better performance of microprocessor. In this paper, the architecture of a tag memory that branch target buffer and TLB can share is presented. Because the two tag memories used for branch target buffer and TLB each is replaced by single shared tag memory, we can expect the smaller ship size and the faster prediction. This hared tag architecture is more advantageous for the microprocessors that uses more bits of address and exploits much more instruction level parallelism.