• Journal of Photoscience
• /
• 제8권1호
• /
• pp.9-12
• /
• 2001

The photoisomerization behavior of benzylideneacetophenones, known as chalcones, was studied. We synthesized the chalcone derivatives that have ether groups at 4 and 4＇ positions. Due to the electron donating ability of the ether oxygen, the bond order of the single bond between two phenyl ring of the chalcone strengthened, which eventually increased the rotational barrier of the single bond. The rotational barrier of the single bond is about 20-22 kcal/mole. Thermal recovery of this process took about 1 min. The UV-visible spectra of these chromophores exhibit two characteristic absorption peaks at 276 nm and 340 nm. The relative intensity of the peaks varies depending on the alkyl chain length of the substituent. Photo-irradiation with the 365 nm light monotonously decreases the 340 nm peak. However, the photo-irradiation with 254 nm light induce two competing processes and produced rather complicated absorption profile.

• 대한소아치과학회지
• /
• 제34권3호
• /
• pp.398-407
• /
• 2007

본 연구는 소아 환자의 유동성 복합 레진 수복 시 접착제의 사용 및 중합 여부 그리고 접착제 종류에 따른 수복물 변연의 미세누출과 전단결합강도를 비교함으로써 치료 시간의 단축 가능성을 타진해보고자 시행하였다. 미세누출을 평가하기 위해 우식이 없거나 법랑질에 제한된 우식이 있는 상, 하악 소구치 84개, 전단결합강도 평가를 위해 협설면에 우식이나 결손부가 없는 대구치 70개를 각각 준비하여 사용하였다. 접착 시스템의 종류에 따라 총 7군을 설정하여 I군과 II군은 Single $Bond^{TM}$, III군과 IV군은 AQ Bond $Plus^{TM}$, Ⅴ군과 Ⅵ군은 Prompt L-$Pop^{TM}$ 그리고 접착 시스템을 사용하지 않고 레진을 충전하는 VII군을 대조군으로 설정하였다. 미세누출과 전단결합강도를 측정하여 다음과 같은 결과를 얻었다. 1. 미세누출 평가 결과 Single $Bond^{TM}$를 사용한 I군과 II군이 다른 군에 비하여 낮은 염료 침투를 나타냈다. I군과 II군 사이의 염료 침투 양상은 유사하게 나타났다. 2. 전단결합측정결과 I군과 II군이 다른 군에 비하여 높은 수치를 나타냈으며 통계적 유의차를 보였다(p<0.05). I군과 II군 사이에는 유의차가 없었다(p>0.05). 3. I군과 II군, III군과 IV군, V군과 VI군 사이에는 통계적 유의차가 없었다(p>0.05). 4. VII군은 I, II군과 V, VI군에 비하여 통계적 유의차가 있게 낮은 전단 결합 강도를 보였으며(p<0.05) III, IV군과는 보다 낮은 수치를 보였으나 통계학적 유의차는 없었다(p>0.05).

• 대한소아치과학회지
• /
• 제27권3호
• /
• pp.444-456
• /
• 2000

치아 교환시기에 발거된 치관이 건전한 유구치 상아질 표면을 One-Bottle 상아질 결합제인 Primer & Bond NT(DeTrey/Dentsply, Konstanz, Germany)와 Single Bond(3M Co. U.S.A.) 그리고 대조군으로 Scotchbond Multipurpose System(3M Co. U.S.A.)를 이용하여 각 제조자의 지침에 따라 처리하여 레진을 충전하고 광중합하였다. 1. 전단 결합 강도의 측정결과 Primer & Bond NT군인 1군, Single Bond군인 2군, 그리고 대조군으로 사용된Scotchbond Multipurpose System군인 3군의 순서로 1군에서 다소 높은 전단 결합 강도를 보였으나, 모든 군들간에는 통계적 유의차가 없었다(p>.05). 2. 주사 전자현미경 소견에서 1군 2군에서 서로 유사한 양상의 잘 형성된 혼화층이 관찰되었으며, 레진 테그와 측방 가지 또한 다수 관찰되었다. 반면 3군에서는 혼화층이나 측방가지의 형성이 1, 2군에 비해 다소 미약한 양상을 보였다.

• Restorative Dentistry and Endodontics
• /
• 제40권2호
• /
• pp.136-142
• /
• 2015

Objectives: The aim of this study was to evaluate the effects of tri-antibiotic paste (TAP) on microtensile bond strengths (MTBS) of dental adhesives to dentin. Materials and Methods: Sixty extracted molars had their occlusal surfaces flattened to expose dentin. They were divided into two groups, i.e., control group with no dentin treatment and experimental group with dentin treatment with TAP. After 10 days, specimens were bonded using self-etch (Filtek P90 adhesive) or etch-and-rinse (Adper Single Bond Plus) adhesives and restored with composite resin. Teeth were sectioned into beams, and the specimens were subjected to MTBS test. Data were analyzed using two-way ANOVA and post hoc Tukey tests. Results: There was a statistically significant interaction between dentin treatment and adhesive on MTBS to coronal dentin (p = 0.003). Despite a trend towards worse MTBS being noticed in the experimental groups, TAP application showed no significant effect on MTBS (p = 0.064). Conclusions: The etch-and-rinse adhesive Adper Single Bond Plus presented higher mean bond strengths than the self-etch adhesive Filtek P90, irrespective of the group. The superior bond performance for Adper Single Bond when compared to Filtek P90 adhesive was confirmed by a fewer number of adhesive failures. The influence of TAP in bond strength is insignificant.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.98-107
• /
• 2004

The objectives of this research are to establish the criteria of peel occurrence considering the shape of bond terminus and to compare the strength properties of some adhesive joints. The criteria of feel occurrence at the bond terminus was suggested. Peel loads of some adhesive joint(butt joint, T -shape specimen, single lap joint) were determined from tensile tests. Principal stress distributions of these joints were determined from finite element method analysis. Then, peel occurrence was estimated with intensity of stress singularity ' $K_{prin.}$' when the terminus shape was square, with average principal stress when the terminus shape was rounded. The conclusions are summarized as follows; (1) In the non-filleted model(e.g., butt joint, T-shape specimen), principal stress shows singularity at the bond terminus, intensity of stress(principal stress) singularity ' $K_{prin.}$&apso; can use as the criteria of peel occurrence at the bond terminus. (2) In the filleted model(e.g., single lap joint), principal stress doesn't show singularity at the bond terminus. Average principal stress can use as the criteria of peel occurrence at the bond terminus.'t show singularity at the bond terminus. Average principal stress can use as the criteria of peel occurrence at the bond terminus.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.296-305
• /
• 2002

The main disadvantage of cement-retained implant restorations is their difficulty in retrievability. Advocates of cemented implant restorations frequently state that retrievability of the restoration can be maintained if a provisional cement is used. The purpose of this study was to find the optimal properties of provisional luting cements and the surface treatment of abutments in single implant abutment system. 30 prefabricated implant abutments, height 8mm, diameter 6mm, 3-degree taper per side, with light chamfer margins were obtained. Three commercially available provisional luting agents which were all zinc oxide eugenol type ; Cavitec, TempBond and TempBond NE were evaluated. No cement served as the control. TempBond along with vaseline, a kind of petrolatum (2:1 ratio) was also evaluated. Ten out of thirty abutments were randomly selected and abutment surfaces were sandblasted with $50{\mu}m$ aluminum oxide. Another ten abutments were sandblasted with $250{\mu}m$ aluminum oxide. A vertical groove, 1 mm deep and 5mm long was cut in each twenty abutments. Ten of them were sandblasted with $50{\mu}m$ aluminum oxide. The full coverage casting crowns were cemented to the abutments with the designated provisional luting agent. Specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Each specimen was attached to a universal testing machine. A crosshead speed of 0.5mm/min was used to apply a tensile force to each specimen. Within the limitations of this in vitro study, the following conclusions were drawn: 1. Tensile bond strength of provisional luting cements in no surface treatment decreased with the sequence of TempBond NE, TempBond, Cavitec, TempBond with vaseline, no cement. 2. Tensile bond strength more increased by surface treatment. Sandblasting with $250{\mu}m$ aluminum oxide exhibited the highest tensile bond strength in the abutment cemented with TempBond NE and sandblasting with $50{\mu}m$ aluminum oxide exhibited the highest tensile bond strength in cemented with TempBond. 3. In the aspect of a groove formation, tensile bond strength significantly increased in TempBond with vaseline only and the others had no significant effect on tensile bond strength.

• 대한소아치과학회지
• /
• 제45권4호
• /
• pp.436-444
• /
• 2018

이 연구의 목적은 최근 새로 소개된 3-in-1 자가부식, 자가접착 유동성 복합레진의 유치 법랑질과 상아질에 대한 결합력을 기존의 접착 시스템들과 비교 평가하기 위함이다. 110개의 발치된 건전한 유전치를 상아질과 법랑질, 그리고 접착 시스템에 따라 11개의 군으로 나눴다. 연구재료로 Scotchbond Multi-Purpose Plus, Single bond 2, Clearfil SE Bond, All-Bond Universal, Constic을 사용하여 전단결합강도를 평가하였다. 3-in-1 자가부식, 자가접착 유동성 복합레진은 상아질과 법랑질 연구에서 모두 가장 낮은 전단결합강도를 나타냈지만 몇몇 접착 시스템과는 유의한 차이를 나타내지 않아 유치 수복에서 사용될 수 있을 것으로 생각되나 추가적인 연구가 필요할 것으로 여겨진다.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.350-357
• /
• 2017

PURPOSE. The object of the present study was to evaluate the shear bonding strength of composite to PEKK by applying several methods of surface treatment associated with various bonding materials. MATERIALS AND METHODS. One hundred and fifty PEKK specimens were assigned randomly to fifteen groups (n = 10) with the combination of three different surface treatments (95% sulfuric acid etching, airborne abrasion with $50{\mu}m$ alumina, and airborne abrasion with $110{\mu}m$ silica-coating alumina) and five different bonding materials (Luxatemp Glaze & Bond, Visio.link, All-Bond Universal, Single Bond Universal, and Monobond Plus with Heliobond). After surface treatment, surface roughness and contact angles were examined. Topography modifications after surface treatment were assessed with scanning electron microscopy. Resin composite was mounted on each specimen and then subjected to shear bond strength (SBS) test. SBS data were analyzed statistically using two-way ANOVA, and post-hoc Tukey's test (P<.05). RESULTS. Regardless of bonding materials, mechanical surface treatment groups yielded significantly higher shear bonding strength values than chemical surface treatment groups. Unlike other adhesives, MDP and silane containing self-etching universal adhesive (Single Bond Universal) showed an effective shear bonding strength regardless of surface treatment method. CONCLUSION. Mechanical surface treatment behaves better in terms of PEKK bonding. In addition, self-etching universal adhesive (Single Bond Universal) can be an alternative bonding material to PEKK irrespective of surface treatment method.

• Restorative Dentistry and Endodontics
• /
• 제37권4호
• /
• pp.207-214
• /
• 2012

Objectives: This study evaluated the influence of chlorhexidine (CHX) on the microtensile bonds strength (${\mu}TBS$) of resin core with two adhesive systems to dentin in endodontic cavities. Materials and Methods: Flat dentinal surfaces in 40 molar endodontic cavities were treated with self-etch adhesive system, Contax (DMG) and total-etch adhesive system, Adper Single Bond 2 (3M ESPE) after the following surface treatments: (1) Priming only (Contax), (2) CHX for 15 sec + rinsing + priming (Contax), (3) Etching with priming (Adper Single Bond 2), (4) Etching + CHX for 15 sec + rinsing + priming (Adper Single Bond 2). Resin composite build-ups were made with LuxaCore (DMG) using a bulk method and polymerized for 40 sec. For each condition, half of specimens were submitted to ${\mu}TBS$ after 24 hr storage and half of them were submitted to thermocycling of 10,000 cycles between $5^{\circ}C$ and $55^{\circ}C$ before testing. The data were analyzed using ANOVA and independent t-test at a significance level of 95%. Results: CHX pre-treatment did not affect the bond strength of specimens tested at the immediate testing period, regardless of dentin surface treatments. However, after 10,000 thermocycling, all groups showed reduced bond strength. The amount of reduction was greater in groups without CHX treatments than groups with CHX treatment. These characteristics were the same in both self-etch adhesive system and total-etch adhesive system. Conclusions: 2% CHX application for 15 sec proved to alleviate the decrease of bond strength of dentin bonding systems. No significant difference was shown in ${\mu}TBS$ between total-etching system and self-etching system.

• Restorative Dentistry and Endodontics
• /
• 제32권4호
• /
• pp.313-326
• /
• 2007

본 연구는 단일 접착과정 상아질 접착제와 복합레진 사이에는 부적합성이 존재하며, 이를 개선하기 위해 중간 레진층이 필요하다는 가설을 규명하기 위해 시행되었다. 발치된 치아의 협설측 상아질에 3종의 단일 접착과정 상아질 접착제를 도포 후 광중합, 2종의 중간 레진층 적용, 광중합 또는 자가중합형 복합레진의 사용여부에 따라 30개의 실험군으로 분류하였다. 미세전단 결합강도를 측정하고 투과전자현미경 (TEM)을 이용하여 접착계면에서의 미세 누출과 수분의 이동경로를 관찰하여 접착제의 투과성을 평가하여 다음과 같은 결론을 얻었다. 중간 레진층을 적용 시 접착층의 투과도가 감소되었고 복합레진에 대한 단일 접착과정 상아질 접착제의 결합강도가 증가되었다. 따라서 시간 절약 및 간단한 접착과정을 선호하여 단순화된 상아질 접착제를 선택하는 것은 재고되어야 한다.