• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.70-76
• /
• 2013

The present paper proposes a coupled volume-of-fluid (VOF) and level-set (LS) method for simulating incompressible two-phase flows that include surface tension effects. The interface of two fluids and its motion are represented by a VOF method designed using high-resolution differencing schemes. This hybrid method couples the VOF method with an LS distancing algorithm in an explicit way to improve the calculation of the normal and curvature of the interface. It is developed based on a rather simple algorithm to be efficient for various practical applications. The accuracy and convergence properties of the method are verified in a simulation of a single gas bubble rising in a three-dimensional flow with a large density ratio.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.115-120
• /
• 2012

In this paper, we present a method to automatically quantify the three-dimensional (3D) volume of red blood cells (RBCs) using off-axis digital holographic microscopy. The RBCs digital holograms are recorded via a CCD camera using an off-axis interferometry setup. The RBCs' phase image is reconstructed from the recorded off-axis digital hologram by a computational reconstruction algorithm. The watershed segmentation algorithm is applied to the reconstructed phase image to remove background parts and obtain clear targets in the phase image with many single RBCs. After segmenting the reconstructed RBCs' phase image, all single RBCs are extracted, and the 3D volume of each single RBC is then measured with the surface area and the phase values of the corresponding RBC. In order to demonstrate the feasibility of the proposed method to automatically calculate the 3D volume of RBC, two typical shapes of RBCs, i.e., stomatocyte/discocyte, are tested via experiments. Statistical distributions of 3D volume for each class of RBC are generated by using our algorithm. Statistical hypothesis testing is conducted to investigate the difference between the statistical distributions for the two typical shapes of RBCs. Our experimental results illustrate that our study opens the possibility of automated quantitative analysis of 3D volume in various types of RBCs.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.1
• /
• pp.81-89
• /
• 2017

In this paper, we propose a gait pattern recognition method for intelligent prosthesis that enables walking in various environments of femoral amputees. The proposed gait mode changing method is a single sensor based algorithm which can discriminate gait surface and gait phase using only strain gauges sensor, and it is designed to simplify the algorithm based on multiple sensors of existing intelligent prosthesis and to reduce cost of prosthesis system. For the recognition algorithm, we analyzed characteristics of the ground reaction force generated during gait of normal person and defined gait step segmentation and gait detection condition, A gait analyzer was constructed for the gait experiment in the environment similar to the femoral amputee. The validity of the paper was verified through the defined detection conditions and fabricated instruments. The accuracy of the algorithm based on the single sensor was 95%. Based on the proposed single sensor-based algorithm, it is considered that the intelligent prosthesis system can be made inexpensive, and the user can directly grasp the state of the walking surface and shift the walking mode. It is confirmed that it is possible to change the automatic walking mode to switch the walking mode that is suitable for the walking mode.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.272-275
• /
• 2016

This paper presents a method of single image dehazing and surface-based feature detection for remote sensing images. In the conventional dark channel prior (DCP) algorithm, the resulting transmission map invariably includes some block artifacts because of patch-based processing. This also causes image blur. Therefore, a refined transmission map based on a hidden Markov random field and expectation-maximization algorithm can reduce the block artifacts and also increase the image clarity. Also, the proposed algorithm enhances the accuracy of image matching surface-based features in an remote sensing image. Experimental results confirm that the proposed algorithm is superior to conventional algorithms in image haze removal. Moreover, the proposed algorithm is suitable for the problem of image matching based on feature extraction.

• 한국가시화정보학회:학술대회논문집
• /
• 2001.12a
• /
• pp.75-85
• /
• 2001

The hierarchic recursive local-correlation PIV algorithm with CBC(correlation based correction) method was developed to increase the spatial resolution of PIV results and to reduce error vectors. This new algorithm was applied to the single-frame and double-frame cross-correlation PIV techniques. In order to evaluate its performance, the recursive algorithm was tested using synthetic images, PIV standard images from Visualization Society of Japan, real flows including ventilation flow inside a vehicle passenger compartment and wake behind a circular cylinder with rib let surface. As a result, most spurious vectors were suppressed by employing CBC method. In addition, the hierarchical recursive correlation algorithm improved largely the sub-pixel accuracy of PIV results by decreasing the interrogation window size, increasing spatial resolution significantly.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.542-550
• /
• 2011

This paper describes the design and hardware implementation of a Single Input Fuzzy Logic Controller (SIFLC) to regulate the output voltage of a boost power converter. The proposed controller is derived from the signed distance method, which reduces a multi-input conventional Fuzzy Logic Controller (CFLC) to a single input FLC. This allows the rule table to be approximated to a one-dimensional piecewise linear control surface. A MATLAB simulation demonstrated that the performance of a boost converter is identical when subjected to the SIFLC or a CFLC. However, the SIFLC requires nearly an order of magnitude less time to execute its algorithm. Therefore the former can replace the latter with no significant degradation in performance. To validate the feasibility of the SIFLC, a 50W boost converter prototype is built. The SIFLC algorithm is implemented using an Altera FPGA. It was found that the SIFLC with asymmetrical membership functions exhibits an excellent response to load and input reference changes.

• International Journal of Aeronautical and Space Sciences
• /
• v.5 no.1
• /
• pp.94-100
• /
• 2004

Ionospheric time delay is the biggest error source for single-frequency DGPSapplications, including time transfer and Wide Area Differential GPS (WADGPS).Currently, there are many attempts to develop real-time ionospheric time delayestimation techniques to reduce positioning error due to the ionospheric time delay.Klobuchar model is now widely used for ionosphehc time delay calculation forsingle-frequency users. It uses flat surface at night time and cosine surface atdaytime[1], However, the model was developed for worldwide ionosphere fit, it isnot adequate for local area single-frequency users who want to estimateionospheric time delay accurate1y[2]. Therefore, 3-D ionosphere model usingtomographic estimation has been developed. 3-D tomographic inversion modelshows better accuracy compared with prior a1gorithms[3]. But that existing 3-Dmodel still has problem that it requires many coefficients and measurements forgood accuracy. So, that algorithm has Umitation with many coefficients incontinuous estimation at the small region which is obliged to have fewermeasurements.In this paper, we developed an modified 3-D ionosphehc time delay modelusing tomography, which requires only fewer coefficients. Because the combinationsof our base coefficients correspond to the full coefficients of the existing model, ourmodel has equivalent accuracy to the existing. We confirmed our algorithm bysimulations. The results proved that our modified algohthm can perform continuousestimation with fewer coefficients.

• Journal of Power Electronics
• /
• v.13 no.6
• /
• pp.955-963
• /
• 2013

To acquire a performed and practical solution that is free from chattering, this study proposes the use of an adaptive super-twisting algorithm to drive a single-phase induction motor. Partial feedback linearization is applied before using a super-twisting algorithm to control the speed and stator currents. The load torque is considered an unknown but bounded disturbance. Therefore, a time-varying switching gain that does not require prior knowledge of the disturbance boundary is proposed. A simple sliding surface is formulated as the difference between the real and desired trajectories obtained from the indirect rotor flux oriented control strategy. To illustrate the effectiveness of the proposed control structure, an experimental setup around a digital signal processor (dS1104) is developed and several tests are performed.

• Wind and Structures
• /
• v.5 no.6
• /
• pp.515-526
• /
• 2002

The wind flow over two-dimensional sinusoidal hilly obstacles with slope (the ratio of height to half width) of 0.5 has been investigated experimentally and numerically. Experiments for single and double sinusoidal hill models were carried out in a subsonic wind tunnel. The mean velocity profiles, turbulence statistics, and surface pressure distributions were measured at the Reynolds number based on the obstacle height(h=40 mm) of $2.6{\times}10^4$. The reattachment points behind the obstacles were determined using the oil-ink dot and tuft methods. The smoke-wire method was employed to visualize the flow structure qualitatively. The finite-volume-method and the SIMPLE-C algorithm with an orthogonal body-fitted grid were used for numerical simulation. Comparison of mean velocity profiles between the experiments and the numerical simulation shows a good agreement except for the separation region, however, the surface pressure data show almost similar distributions.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.4
• /
• pp.254-261
• /
• 2002

Small marine propeller is generally machined by 5-axis machining. This paper suggests a method to create geometric model from point array data and 4-axis machining NC data for propeller. With conventional method, the setting posture should be changed, because propeller has front and back surface of wing. The change of setting posture has a bad influence on precision of propeller. So this paper pro-poses a method to machine propeller by single setup for 4-axis machining. The cutter moves to parallel direction of the XY plane. To determine the cutter orientation efficiently, the' tilting guiding line' is proposed. A proposed algorithm is written in C language and successfully applied to the 5-axis milling machine of industrial field.