• 한국패류학회지
• /
• 제28권4호
• /
• pp.293-303
• /
• 2012

I. galbana, P. lutheri 및 C. simplex 3종을 먹이로 공급하며, 미세조류 종류에 따른 피조개 유생과 부착치패의 성장과 생존율 등을 비교하였다. 서로 다른 미세조류 3종을 단일 또는 혼합하여 먹이로 공급한 피조개 유생의 성장은 혼합 공급구에서 가장 빠르게 나타내었고, 단일 공급구 중에서 C. simplex 공급구에서 가장 높은 성장을 보였다. 또 유생의 생존율은 혼합 공급구에서 $27.4{\pm}5.3%$로 가장 높게 나타내었고, 단일 공급구 중에서 C. simplex 공급구에서 $14.5{\pm}2.3%$로 가장 높았다. I. galbana, P. lutheri, C. simplex 3종을 단일 또는 동일비율로 혼합한 미세조류의 지방산 조성은 EPA의 경우 C. simplex에서만 $25.9{\pm}0.64%$로 나타났고, 다불포화지방산(PUFA)과 n-3 HUFA 함량은 C. simplex에서 가장 높게 나타났다. 또 이들 미세조류를 먹이로 공급한 피조개 부착치패의 경우 C. simplex 공급구에서 포화지방산과 AA 함량이 유의하게 높았다. 이와 같은 C. simplex의 지방산 조성이 피조개 유생과 부착치패의 성장과 생존율의 원인으로 판단된다. 따라서 단일종으로는 C. simplex가 가장 적합하나 3종을 혼합하여 공급하는 것이 더 좋은 먹이효율을 유도할 수 있다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제25권2호
• /
• pp.147-151
• /
• 2012

Fifteen races resulted from silkworm breeding program at Sericulture Research Department (SRD) were used for hybridization. Fourteen hybrids were obtained and coded as; Giza C, D, R, S, T, U, A, V, W, P, H, L and Qanater 1, 2. The traits of cocoon weight, cocoon shell weight, pupal weight, cocoon shell ratio, silk productivity, fifth instar duration, total larval duration, number of cocoon per liter and pupation ratio were evaluated. Data were analyzed by using three formulae of heterosis over better, mid and check parent values. Hybrids of Giza V, C, N, Qanater 1 and 2 are promising and could be used in commercial cocoon production. Generally, there are some new hybrids can be exploited in commercial scale. Also, the local races can be evolved using the hybridization, inbreeding and selection program.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.127-130
• /
• 2004

In this study, three-dimensional numerical calculations are peformed to simulate the flow and heat transfer in helically coiled tube steam generator employing a commercial CFD (Computational Fluid Dynamics) code. The problem considered herein includes the boiling phase change flow of tube side fluid and the single-phase counter-current flow of shell side hot fluid transferring heat to the tube side flow thru the tube wall. Detailed investigations are performed for both shell-side and tube-side flow fields in terms of density and volume fractions of each phase of fluids as well as for the tube wall heat transfer field in terms of heat transfer coefficients.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3576-3580
• /
• 2012

Larva-like GaS nanostructures synthesized by the thermal evaporation of Ga metals and S powders were coated with $SiO_2$ by the sputtering technique. Transmission electron microscopy and X-ray diffraction analyses revealed that the cores and shells of the GaS-core/$SiO_2$-shell larva-like nanostructures were single crystal wurtzite-type hexagonal structured-GaS and amorphous $SiO_2$, respectively. Photoluminescence (PL) measurements at room temperature showed that the passivation of the larva-like GaS nanostructures was successfully achieved with $SiO_2$ without nearly harming the major emission from the wires. However, subsequent thermal annealing treatment was found to be undesirable owing to the degradation of their emission in intensity.

• Steel and Composite Structures
• /
• 제6권4호
• /
• pp.353-366
• /
• 2006

The discrete singular convolution (DSC) algorithm for determining the frequencies of the free vibration of single isotropic and orthotropic laminated conical shells is developed by using a numerical solution of the governing differential equations of motion based on Love's first approximation thin shell theory. By applying the discrete singular convolution method, the free vibration equations of motion of the composite laminated conical shell are transformed to a set of algebraic equations. Convergence and comparison studies are carried out to check the validity and accuracy of the DSC method. The obtained results are in excellent agreement with those in the literature.

• Steel and Composite Structures
• /
• 제39권3호
• /
• pp.291-306
• /
• 2021

Based on Reissner's mixed variational theorem (RMVT), the authors develop a semi-analytical finite element (FE) method for a three-dimensional (3D) bending analysis of nonhomogeneous orthotropic, complete and incomplete toroidal shells subjected to uniformly-distributed loads. In this formulation, the toroidal shell is divided into several finite annular prisms (FAPs) with quadrilateral cross-sections, where trigonometric functions and serendipity polynomials are used to interpolate the circumferential direction and meridian-radial surface variations in the primary field variables of each individual prism, respectively. The material properties of the toroidal shell are considered to be nonhomogeneous orthotropic over the meridianradial surface, such that homogeneous isotropic toroidal shells, laminated cross-ply toroidal shells, and single- and bi-directional functionally graded toroidal shells can be included as special cases in this work. Implementation of the current FAP methods shows that their solutions converge rapidly, and the convergent FAP solutions closely agree with the 3D elasticity solutions available in the literature.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.451-459
• /
• 2022

In present study, the nonlocal Flügge shell model based is utilized to investigate the vibration characteristics of armchair and chiral single-walled carbon nanotubes with impact of small-scale effect subjected to two boundary supports. The wave propagation approach is employed to determine eigen frequencies for armchair and chiral tubes. The fundamental frequencies scrutinized with assorted aspect ratios by varying the bending rigidity. The raised in value of nonlocal parameter reduces the corresponding fundamental frequency. It is investigated with higher aspect ratio, the boundary conditions have a momentous influence on vibration of CNT. It is concluded that frequencies would increase by increasing of the bending rigidity. Solutions of the frequency equation have determined by writing in MATLAB coding.

• 대한환경공학회지
• /
• 제31권12호
• /
• pp.1095-1104
• /
• 2009

본 연구는 오염토양 정화 및 폐자원의 재활용 측면에서 굴껍질 및 달걀껍질을 활용한 비소 오염토양 안정화 기술의 적용 가능성을 평가하고자 수행되었다. 안정화 효율을 평가하고자 5가비소로 오염된 토양에 굴껍질과 달걀껍질을 0%(무처리구)~5% 수준으로 처리한 후 30일간 항온배양 하였으며 이후 1 N HCl, 0.1 N NaOH, 0.5 N $H_2SO_4$의 추출제를 이용하여 토양 중 비소를 추출하였다. 1 N HCl 추출결과 무처리구의 비소 함량은 29.43 mg/kg였고 굴껍질 5% 및 달걀껍질 5% 처리구에서 각각 26.26 mg/kg와 26.74 mg/kg로 나타나 평균 10% 정도로 감소효과를 나타내었다. 이외 0.1 N NaOH 및 0.5 N $H_2SO_4$ 추출결과에서도 비소의 농도는 소폭 감소하였다. 한편 굴껍질 및 달걀껍질 처리 토양의 pH는 7.62~7.94로 무처리구 (pH 6.54)에 비해 pH 1 이상 증가하였고, 토양 내 치환성 칼슘의 함량은 12.77~20.18 cmol(+)/kg로 무처리구(6.87 cmol(+)/kg)보다 약 2배 이상 증가하는 것으로 나타나 굴껍질과 달걀껍질은 토양 비옥도 개선에 효과가있는 것으로 판단되었다. 이상의 결과를 종합해보면 굴껍질과 달걀껍질의 직접적 사용은 토양의 비옥도 향상에는 효과가 있는 것으로 판단되나 토양내 비소의 안정화에 적용하기에는 다소 부적합한 것으로 판단되며 향후 효율성 향상을 위하여 소성과 같은 적절한 가공 공정이 필요한 것으로 판단되었다.

• 대한조선학회논문집
• /
• 제49권3호
• /
• pp.232-238
• /
• 2012

The effects of temperature on the structural behavior of polar class vessels have been experimentally and numerically investigated. Experiments were carried out on single frame structures made of steel material, DH36, which is used for outer shell of the vessels making transit through the polar region. A knife edge type striker was dropped down onto single frame structures. The temperatures of the single frames were set to $-30^{\circ}C$, $-50^{\circ}C$ and room temperature. The deflection around the mid-point of the single frame was measured and numerically simulated using finite element model. Strain rate effect on the structural behavior has been investigated and turned out that the strain rate effect can be neglected. From the results of the experiment and numerical analyses, it has been noticed that the permanent deflection at lower temperature was reduced due to a temperature hardening of material as expected.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.376-376
• /
• 2012

Semiconductor nanowires (NWs) are future building block for nano-scale devices. Especially, Ge NWs are fascinated material due to the high electrical conductivity with high carrier mobility. It is strong candidate material for post-CMOS technology. However, thermal stability of Ge NWs are poor than conventional semiconductor material such as Si. Especially, when it reduced size as small as nano-scale it will be melted around CMOS process temperature due to the melting point depression. Recently, Graphene have been intensively interested since it has high carrier mobility with single atomic thickness. In addition, it is chemically very stable due to the $sp^2$ hybridization. Graphene films shows good protecting layer for oxidation resistance and corrosion resistance of metal surface using its chemical properties. Recently, we successfully demonstrated CVD growth of monolayer graphene using Ge catalyst. Using our growth method, we synthesized Ge/graphene core/shell (Ge@G) NW and conducted it for highly thermal stability required devices. We confirm the existence of graphene shell and morphology of NWs using SEM, TEM and Raman spectra. SEM and TEM images clearly show very thin graphene shell. We annealed NWs in vacuum at high temperature. Our results indicated that surface melting phenomena of Ge NWs due to the high surface energy from curvature of NWs start around $550^{\circ}C$ which is $270^{\circ}C$ lower than bulk melting point. When we increases annealing temperature, tip of Ge NWs start to make sphere shape in order to reduce its surface energy. On the contrary, Ge@G NWs prevent surface melting of Ge NWs and no Ge spheres generated. Furthermore, we fabricated filed emission devices using pure Ge NWs and Ge@G NWs. Compare with pure Ge NWs, graphene protected Ge NWs show enhancement of reliability. This growth approach serves a thermal stability enhancement of semiconductor NWs.