• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.40-50
• /
• 2012

The Berkeley-medium access control (B-MAC) is a lightweight, configurable and asynchronous duty cycle medium access control (MAC) protocol in wireless sensor networks. This article presents an analytic modelling of single-hop B-MAC protocol under a Poisson traffic assumption.Our model considers important B-MAC parameters such as the sleep cycle, the two stage backoff mechanism, and the extended preamble. The service delay of an arriving packet and the energy consumption are calculated by an iterative method. The simulation results verify that the proposed analytic model can accurately estimate the performance of single-hop B-MAC with different operating environments.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.187-189
• /
• 2012

The medium access control (MAC) protocol is designed only for single channel in the IEEE 802.11 standard. That means the throughput of the network is limited by the bandwidth of the single channel. The multiple channels can be exploited to get more concurrent transmission. In this paper, we propose a novel Multi-channel MAC that utilizes the channel more efficiently than other Multi-channel MAC protocols.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.53-54
• /
• 2006

In this paper, we analytically evaluate packet delay and energy consumption of S-MAC protocol with a modified Markov chain model. Although some models, based on IEEE 802.11 MAC protocol, to analyze the S-MAC protocol in wireless sensor network (WSN) have been proposed, they fail to consider the differences in architecture between the S-MAC and the 802.11 MAC. Therefore, by reflecting the significant features in the S-MAC function, we model the operation of S-MAC protocol, and derive its packet delay and energy consumption in single-hop WSN. Numerical results show the delay and the dissipated energy at various duty cycle values according to offered load, where a practical mote is used.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.4
• /
• pp.684-702
• /
• 2011

This paper proposes a TDMA-based multichannel medium access control (MAC) protocol for QoS provisioning in mobile ad hoc networks (MANETs) that enables nodes to transmit their packets in distributed channels. The IEEE 802.11 standard supports multichannel operation at the physical (PHY) layer but its MAC protocol is designed only for a single channel. The single channel MAC protocol does not work well in multichannel environment because of the multichannel hidden terminal problem. Our proposed protocol enables nodes to utilize multiple channels by switching channels dynamically, thus increasing network throughput. Although each node of this protocol is equipped with only a single transceiver but it solves the multichannel hidden terminal problem using temporal synchronization. The proposed energy efficient multichannel MAC (EM-MAC) protocol takes the advantage of both multiple channels and TDMA, and achieves aggressive power savings by allowing nodes that are not involved in communications to go into power saving "sleep mode". We consider the problem of providing QoS guarantee to nodes as well as to maintain the most efficient use of scarce bandwidth resources. Our scheme improves network throughput and lifetime significantly, especially when the network is highly congested. The simulation results show that our proposed scheme successfully exploits multiple channels and significantly improves network performance by providing QoS guarantee in MANETs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.656-663
• /
• 2005

This paper presents a multi-channel enhancement scheme for the MAC protocol of IEEE 802.15.3 High-rate WPAN (Wireless Personal Area Network). The current MAC protocol of the IEEE 802.15.3 High-rate WPAN is designed for sharing a single channel among DEVs of a piconet; that is, within a single piconet, PNC prevents interference through MAC layer assignment of time slots to other DEVs using time-division multiple access. When the number of DEVs that communicate with each other frequently, is increased in a single WPAN, the size of the superframe becomes inevitably large, and this may result in a significant throughput drop or a failure to provide QoS guarantee. A multi-channel enhancement scheme for the MAC protocol of IEEE 802.15.3 High-rate WPAN is proposed to significantly increase the aguegate throughput and more reliably provide the QoS guarantees in a piconet

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1162-1169
• /
• 2012

One of the important operational requirements for mission critical Ethernet networked system is having the fault tolerant capability. Such capability can be obtained by equipping multiport Network Interface Card (NIC) in each node in the system. Conventional NIC uses two or more Media Access Controls (MACs) and a co-processor for the MAC switching whenever an active port fails. Since firmware is needed for the co-processor, longer fail-over switching and degraded throughput can be generally expected. Furthermore the system upgrading requiring the firmware revision in each tactical node demands high cost. In this paper we propose a novel single MAC based NIC that does not use a co-processor, but just use general discrete building blocks such as MAC chip and switching chip, which results in better performances than conventional method. Experimental results validate our scheme.

• Journal of Computing Science and Engineering
• /
• v.7 no.4
• /
• pp.231-241
• /
• 2013

Improvements in wireless sensor network (WSN) technology have resulted in a large number of applications. WSNs have been mainly used for monitoring applications, but they are also applicable to target tracking, health care, and monitoring with multimedia data. Nodes are generally deployed in environments where the exhausted batteries of sensor nodes are difficult to charge or replace. The primary goal of communication protocols in WSNs is to maximize energy efficiency in order to prolong network lifetime. In this paper, various medium access control (MAC) protocols for synchronous/asynchronous and single/multi-channel WSNs are investigated. Single-channel MAC protocols are categorized into synchronous and asynchronous approaches, and the advantages and disadvantages of each protocol are presented. The different features required in multi-channel WSNs compared to single-channel WSNs are also investigated, and surveys on multi-channel MAC protocols proposed for WSNs are provided. Then, existing broadcast schemes in such MAC protocols and efficient multi-hop broadcast protocols proposed for WSNs are provided. The limitations and challenges in many communication protocols according to this survey are pointed out, which will help future researches on the design of communication protocols for WSNs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1052-1070
• /
• 2016

Wireless Body Area Networks (WBANs) have received a lot of attention as a promising technology for medical and healthcare applications. A WBAN should guarantee energy efficiency, data reliability, and low data latency because it uses tiny sensors that have limited energy and deals with medical data that needs to be timely and correctly transferred. To satisfy this requirement, many multi-radio multi-channel MAC protocols have been proposed, but these cannot be implemented on current off-the-shelf sensor nodes because they do not support multi-radio transceivers. Thus, recently single-radio multi-channel MAC protocols have been proposed; however, these methods are energy inefficient due to data duplication. This paper proposes a TDMA-based single-radio, multi-channel MAC protocol that uses the Unbalanced Star+Mesh topology to satisfy the requirements of WBANs. Our analytical analysis together experiments using real sensor nodes show that the proposed protocol outperforms existing methods in terms of energy efficiency, reliability, and low data latency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.506-514
• /
• 2009

To minimize energy consumption, most of MAC Protocols in WSNs exploit low duty cycling. Among those, RMAC [4] allows a node to transmit a data packet for multiple hops in a single duty cycle, which is made possible by exploiting a control frame named Pioneer (PION) in setting up the path. In this paper, we present a MAC Protocol called Hop Extended MAC (HE-MAC) that transmits the data packet for more multiple hops in a single duty cycle. It employs an EXP (Explorer) frame to set up the multiple hop transmission, which contains the information of the maximum hop that a packet can be transmitted. With the use of the information in EXP and an internal state of Ready to Receive (RTR), HEMAC extends the relay of the packet beyond the termination of the data period by two more hops compared to RMAC. Along with our proposed adaptive sleeping method, it also reduces power consumption and handles heavy traffic efficiently without experiencing packet inversion observed in RMAC. We analytically obtain the packet delivery latency in HE-MAC and evaluate the performance through ns-2 simulations. Compared to RMAC, HE-MAC achieves 14% less power consumption and 20% less packet delay on average for a random topology of 300 nodes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.280-282
• /
• 2005

급변하는 컴퓨터 네트워킹 환경에서 이동화에 따른 무선통신의 비중이 날로 더해지고 있다. 본 논문에서는 무선 인터넷 프로토콜 표준인 IEEE 802.11의 문제점들을 분석하고, Multi-Hop Ad Hoc Network에서 성능 향상을 위하여 Single-channel Jamming 신호를 기반으로 한 SJMAC(Single-channel Jamming MAC) 프로토콜을 설계하고, NS2 모듈을 구현한 후에 성능 평가를 하였다. 기존 IEEE 802.11과의 성능 비교를 위하여 NS2 (Network Simulator2)[1]에 SJMAC 모듈을 추가하여 제안된 프로토콜의 성능을 검증한다.