• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.1-7
• /
• 2008

Flashed steam system is one of the important geothermal power production methods. In this paper, optimum operations and performances of single and double flash systems are presented. It is shown that double flash system can produce about 26.5% more power than single flash system. Temperature of geothermal water($T_R$) is the most important parameter in the geothermal system. Optimum single and double flash temperatures and net power produced with these optimum conditions are expressed as a function of $T_R$ in this study. Thus net power output from geothermal resources can be estimated with the results of this work. Condenser Temperature($T_{con}$) is also important and the net power production can be shown as a function of ($T_R-T_{con}$. Volume flow rate per unit power is also to be considered as the condenser temperature decreases.

• 음성과학
• /
• 제14권4호
• /
• pp.157-167
• /
• 2007

In this paper, we implemented a single-chip speech recognizer using the TMS320C2000 DSPs. For this implementation, we had developed very small-sized speaker-dependent recognition engine based on dynamic time warping, which is especially suited for embedded systems where the system resources are severely limited. We carried out some optimizations including speed optimization by programming time-critical functions in assembly language, and code size optimization and effective memory allocation. For the TMS320F2801 DSP which has 12Kbyte SRAM and 32Kbyte flash ROM, the recognizer developed can recognize 10 commands. For the TMS320F2808 DSP which has 36Kbyte SRAM and 128Kbyte flash ROM, it has additional capability of outputting the speech sound corresponding to the recognition result. The speech sounds for response, which are captured when the user trains commands, are encoded using ADPCM and saved on flash ROM. The single-chip recognizer needs few parts except for a DSP itself and an OP amp for amplifying microphone output and anti-aliasing. Therefore, this recognizer may play a similar role to dedicated speech recognition chips.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.330-333
• /
• 1997

In this paper, we designed a low power and small-sized, light weighted intelligent ambulatory monitoring system using a flash memory card. The system's hardware specifications are as follows: 2 channels, 8bit/250Hz sampling rate, 20M byte storage capacity, a single-chip microcontroller (68HC11E9). To easily interface with PC based system, FFS(Flash File System) was used. We obtained the QRS detection rate of 99.14 through the evaluation with MIT/BIH database.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1851-1859
• /
• 2022

Experimental research on flow characteristics of open natural circulation system was performed, to figure out the mechanism of the open natural circulation behaviors. The influence factors, such as the heating power, the inlet subcooled and the level of cooling tank on the flow characteristics of the system were examined. It was shown that within the scope of the experimental conditions, there are five flow types: single-phase stable flow, flash and geyser coexisting unstable flow, flash stable flow, flash unstable flow, and flash and boiling coexisting unstable flow. The geyser flow in flash and geyser coexisting unstable flow is different from classic geysers flow. The flow oscillation period and amplitude of the former are more regular, is a newly discovered flow pattern. By drawing the flow instability boundary diagram and sorting out the flow types, it is found that the two-phase unstable flow is mainly characterized by boiling and flash, which determine the behavior of open natural circulation respectively or jointly. Moreover, compared with full liquid level system, non-full liquid level system is more prone to boiling phenomenon, and the range of heat flux density and undercooling degree corresponding to unstable flow is larger.

• 대한전자공학회논문지SD
• /
• 제49권4호
• /
• pp.26-33
• /
• 2012

임베디드 시스템의 저장매체 시장에서 플래시 메모리가 점유율을 높여나가고 시스템 내에서 대부분의 면적을 차지하게 되면서, 시스템 신뢰도에 무거운 영향을 미치고 있다. 플래시 메모 리는 셀 배열구조에 따라 NOR/NAND-형으로 나뉘어져 있고 플로팅 게이트 셀의 Reference 전압의 갯수 따라 SLC(Single Level Cell)와 MLC(Multi Level Cell)로 구분된다. NAND-형 플래시 메모리는 NOR-형에 비해 속도는 느린 편이지만 대용량화가 쉽고 가격이 저렴하다. 또한 MLC NAND-형 플래시 메모리는 대용량 메모리의 수요가 급격히 높아진 모바일 시장의 영향으로 멀티미디어 데이터 저장의 목적으로 널리 채용되고 있다. 이에 따라 MLC NAND-형 플래시 메모리의 신뢰성을 보장하기 위해 고장 검출 테스팅의 중요도 커지고 있다. 전통적인 RAM에서부터 SLC 플래시 메모리를 위한 테스팅 알고리즘은 많은 연구가 있었고 많은 고장을 검출해 내었다. 하지만 MLC 플래시 메모리의 경우 고장검출을 위한 테스팅 시도가 많지 않았기 때문에 본 논문은 SLC NAND-형 플래시 메모리에서 제안된 기법을 확장한 MLC NAND-형 플래시 메모리를 위한 고장검출 알고리즘을 제안하여 이러한 차이를 줄이려는 시도이다.

• 전자공학회논문지
• /
• 제51권3호
• /
• pp.61-71
• /
• 2014

임베디드 시스템의 저장매체 시장의 플래시 메모리의 점유율이 증가되고 반도체 산업이 성장함에 따라 플래시 메모리의 수요와 공급이 큰 폭으로 증가하고 있다. 특히 스마트폰, 테블릿 PC, SSD등 SoC(System on Chip)산업에 많이 사용되고 있다. 플래시 메모리는 셀 배열 구조에 따라 NOR-형과 NAND-형으로 나뉘고 NAND-형은 다시 Cell당 저장 가능한 bit수에 따라서 SLC(Single Level Cell)과 MLC(Multi Level Cell)로 구분된다. NOR-형은 BIST(Bulit-In Self Test), BIRA(Bulit-In Redundancy Analysis)등의 많은 연구가 진행되었지만 NAND-형의 경우 BIST 연구가 적다. 기존의 BIST의 경우 고가의 ATE 등의 외부 장비를 사용하여 테스트를 진행해야한다. 하지만 본 논문은 MLC NAND-형 플래시 메모리를 위해 제안되었던 MLC NAND March(x)알고리즘과 패턴을 사용하며 내부에 필요한 패턴을 내장하여 외부 장비 없이 패턴 테스트가 가능한 유한상태머신(Finite State Machine) 기반구조의 MLC NAND-형 플래시 메모리를 위한 BIST를 제안하여 시스템의 신뢰도 향상과 수율향상을 위한 시도이다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권12호
• /
• pp.1199-1203
• /
• 2010

컴퓨터 시스템에서 Host와 저장장치간의 데이터 이동은 섹터를 기본 단위로 하고 있는데, 섹터 사이즈는 시스템마다 다른 가변적인 크기일 수 있다. 낸드 플래시 메모리는 구조상 페이지 사이즈와 섹터 사이즈 사이의 상관관계에 있어서, 섹터 사이즈가 낸드 플래시 메모리를 관리하는 방식에 상당한 영향을 미친다. 본 논문에서는 낸드 플래시 메모리 기반의 저장장치에서 효율적인 다중 섹터 사이즈를 지원하는 FTL 매핑 관리 기법을 제안하고, 그 관리 방법과 성능에 관하여 분석하여 본다. 본 논문에서 제안한 방식에 의하면 다중 섹터를 지원하는 낸드 플래시 메모리 저장장치를 효율적으로 관리하여 줄 수 있다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.706-711
• /
• 2014

A low power 6-bit flash ADC that uses an input voltage range detection algorithm is described. An input voltage level detector circuit has been designed to overcome the disadvantages of the flash ADC which consume most of the dynamic power dissipation due to comparators array. In this work, four digital input voltage range detectors are employed and each input voltage range detector generates the specific clock signal only if the input voltage falls between two adjacent reference voltages applied to the detector. The specific clock signal generated by the detector is applied to turn the corresponding latched comparators on and the rest of the comparators off. This ADC consumes 68.82 mW with a single power supply of 1.2V and achieves 4.3 effective number of bits for input frequency up to 1 MHz at 500 MS/s. Therefore it results in 4.6 pJ/step of Figure of Merit (FoM). The chip is fabricated in 0.13-um CMOS process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.952-957
• /
• 2001

The objectives of this investigation were to obtain an excellent spray by cavitation under the low injection pressure. When cavitation occurs in the nozzle hole, the atomization of the liquid jet enhanced considerably. In this experiments, a acrylic nozzle made the gap and installed the bypass in the nozzle hole was used to enhance the atomization of the liquid jet at the low injection pressure. The liquid flow in the nozzle hole was photographed by a transmitted light using a micro flash. The spray angle was measured macroscope images of PMAS and the Sauter mean diameter was measured PDA system. To measure the pressure of the nozzle hole, pressure transducer was used. The results of this study indicated that enhanced atomization of the liquid jet at the low injection pressure was obtained by making the gap and installing the bypass at the single hole nozzle.

• 한국분무공학회지
• /
• 제7권1호
• /
• pp.36-42
• /
• 2002

The objective of this investigation was to obtain an excellent spray at the low injection pressure. When cavitation occurred in the nozzle hole the atomization of the liquid jet enhanced considerably. In this experiments, a acrylic nozzle which was installed the gap and installed the bypass in the nozzle hole was used to enhance the atomization of the liquid jet at the few injection pressure. The liquid flow in the nozzle hole was photographed by a transmitted light using a micro flash. The spray angle was measured by macroscope images of PMAS and the Sauter mean diameter was measured by PDA system. The pressure of the notate hole was measured by pressure transducer. It was found that enhanced atomization of the liquid jet at the low injection pressure was obtained by installing the gap and the bypass at the single hole nozzle.