• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.19-25
• /
• 2010

The purpose of this study is to gain a better understanding of the effects of fuel stratification on reducing the pressure-rise rate at high load in HCCI combustion. It was found that fuel stratification offers good potential to achieve a staged combustion event and reduced pressure-rise rates. The engine is fueled with Di-Methyl Ether (DME) which has unique 2-stage heat release. Numerical analysis is conducted with single and multi-zones model and detailed chemical reaction scheme is done by chemkin and senkin. Calculation result shows that proper fuel stratification prolongs combustion duration and reduce pressure rise rate. Besides IMEP, combustion efficiency and indicated thermal efficiency keep constant. However, too wide fuel stratification increases pressure rise rate and CO and NOx emissions in exhaust gas.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.1988-1993
• /
• 2023

This experimental study investigated the effect of silica fume mixed in concrete blocks on laser-induced explosion behavior. We used a 5.3 kW fiber laser as a thermal source to induce explosive spalling on a concrete surface blended with and without silica fume. An analytical approach based on the difference in the removal rate and thermal behavior was used to determine the effect of silica fume on laser-induced explosive spalling. A scanner was employed to calculate the laser-scabbled volume of the concrete surface to derive the removal rate. The removal rate of the concrete mixed with silica fume was higher than that of without silica fume. Thermal images acquired during scabbling were used to qualitatively analyze the thermal response of laser-induced explosive spalling on the concrete surface. At the early stage of laser heating, an uneven spatial distribution of surface temperature appeared on the concrete blended with silica fume because of frequent explosive spalling within a small area. By contrast, the spalling frequency was relatively lower in laser-heated concrete without silica fume. Furthermore, we observed that a larger area was removed via a single explosive spalling event owing to its high porosity.

• Electronics and Telecommunications Trends
• /
• v.37 no.2
• /
• pp.21-29
• /
• 2022

Cosmic radiation environments having extremely high-energy particles and photons cause severe malfunctions of electrical components in space and terrestrial regions. In this study, we revisit basic knowledge on radiation effects in ICT electrical devices, such as single event effect, total ionizing dose, and displacement damage. To avoid such soft errors and system failures, we introduce essential technical approaches from the perspectives of materials, layouts, circuits, and systems, including current research trends. By considering several techniques and Space EEE part standards, we suggest possible directions that can invoke New Space Era technology.

• Computers and Concrete
• /
• v.21 no.1
• /
• pp.55-66
• /
• 2018

A large main shock may consist of numerous aftershocks with a short period. The aftershocks induced by a large main shock can cause the collapse of a structure that has been already damaged by the preceding main shock. These aftershocks are important factors in structural damages. Furthermore, despite what is often assumed in seismic design codes, earthquakes do not usually occur as a single event, but as a series of strong aftershocks and even fore shocks. For this reason, this study investigates the effect and potential of consecutive earthquakes on the response and behavior of concrete structures. At first, six moment resisting concrete frames with 3, 5, 7, 10, 12 and 15 stories are designed and analyzed under two different records with seismic sequences from real and artificial cases. The damage states of the model frames were then measured by the Park and Ang's damage index. From the results of this investigation, it is observed that the sequences of ground motions can almost double the accumulated damage and increased response of structures. Therefore, it is certainly insufficient to ignore this effect in the design procedure of structures. Also, the use of artificial seismic sequences as design earthquake can lead to non-conservative prediction of behavior and damage of structures under real seismic sequences.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.116-121
• /
• 2004

Simulation of proton irradiation in space is undertaken with a cyclotron accelerator. The cyclotron is capable of accelerating protons up to 200MeV with nominal fluxes near $10^6-10^8\;protons/cm^2/s$. Accelerated protons are irradiated onto a MPC860 for space application. Both the transient and cumulative responses of the device are found due to the proton irradiation. The primary transient response of the device is modification of the stored data in the circuit, whereas intermittent functional interrupts are also found. The cumulative response of the device is the increase of current consumption by the device.

• Journal of Ginseng Research
• /
• v.46 no.3
• /
• pp.435-443
• /
• 2022

Background: Post-traumatic stress disorder (PTSD) is a psychiatric disease that develops following exposure to a traumatic event and is a stress-associated mental disorder characterized by an imbalance of neuroinflammation. Korean Red Ginseng (KRG) is the herbal supplement that is known to be involved in a variety of pharmacological activities. We aimed to investigate the effects of KRG on neuroinflammation as a potential mechanism involved in single prolonged stress (SPS) that negatively influences memory formation and consolidation and leads to cognitive and spatial impairment by regulating BDNF signaling, synaptic proteins, and the activation of NF-κB. Methods: We analyzed the cognitive and spatial memory, and inflammatory cytokine levels during the SPS procedure. SPS model rats were injected intraperitoneally with 20, 50, or 100 mg/kg/day KRG for 14 days. Results: KRG administration significantly attenuated the cognitive and spatial memory deficits, as well as the inflammatory reaction in the hippocampus associated with activation of NF-κB in the hippocampus induced by SPS. Moreover, the effects of KRG were equivalent to those exerted by paroxetine. In addition, KRG improved the expression of BDNF mRNA and the synaptic protein PSD-95 in the hippocampus. Taken together, these findings demonstrate that KRG exerts memory-improving actions by regulating anti-inflammatory activities and the NF-κB and neurotrophic pathway. Conclusion: Our findings suggest that KRG is a potential functional ingredient for protecting against memory deficits in mental diseases, such as PTSD.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.76-83
• /
• 2006

Space radiation environment for COMS is simulated by NASA AP8/AE8, JPL91 and NRL CREME models, respectively for trapped particle, solar proton and cosmic-ray. The radiation effects on electronic devices in communication payload are also estimated by using simulation results. Dose-depth curve and LET spectrum are calculated for estimating total ionizing dose(TID) effect and single event effect(SEE) respectively. Spherical sector method is applied to dose estimation at each position in the units of communication payload to consider shielding effect of platform and housing. Total ionizing dose at each position varies by 8 times through shielding effect under the same external space radiation environment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.4
• /
• pp.277-282
• /
• 2020

This study was initiated to find a way to resolve electronic equipment as it could be affected by multiple environments. The effect of setting the exponential constant wave (iExp) in the telescopic cascade comparator to the SET (Single Event Transient) environment was tested. In this paper, the radio wave delay was measured at 0.46 ㎲ and the gain at 0.713 in the telescopic cascade comparator without setting the SET situation. FET T0 (M6) was measured to have a large spike at 11㎲ to 15㎲ in the telescopic cascade comparator entering the SET situation. FET T1 (M5) has shorted output signals from 10 ㎲ to 16 ㎲. FET T2 (M3) represented a shorted output signal, and FET T3 (M4) measured the output waveform in the form of a large spike waveform. The FET T4 (M1) and FET T5 (M2) are spiky signals. And at all FETs, the propagation delay was changed from 0.45㎲ to 0.54㎲. In summary, The FET element in the telescopic cascade comparator in SET situation was measured to be greatly affected.

• Journal of Mechanical Science and Technology
• /
• v.20 no.9
• /
• pp.1436-1448
• /
• 2006

This paper describes the effects of injection rate shaping on the combustion, fuel consumption and emission of $NO_x$ and soot of a medium duty diesel engine. The focus is on the influence of four different injection rate shapes, square type 1, square type 2, boot and ramp, with a variation of maximum injection pressure and start of injection (SOI). The experiments were carried out on a 1 liter single cylinder research diesel engine equipped with an amplifier-piston common rail injection system, allowing the adjustment of the injection pressure during the injection event and thus injection rate as desired. Two strategies to maintain the injected fuel mass constant were followed. One where rate shaping is applied at constant injection duration with different peak injection pressure and one strategy where rate shaping is applied at a constant peak injection pressure, but with variable injection duration. Injection rate shaping was found to have a large effect on the premixed and diffusion combustion, a significant influence on $NO_x$ emissions and depending on the followed strategy, moderate or no influence on soot emission. Only small effects on indicated fuel consumption were found.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.113-120
• /
• 2004

The object of this study is to investigate the effect of compounded welding through the AE(Acoustic Emission) characteristics for weld HAZ(Heat Affected Zone) under the static tensile test. This study was carried out an SWS 490A, high tension steel for electric shield metal arc welding(SMAW), $CO_2$ gas arc welding and TIG welding. Data displays are based on the measured parameters of the AE signals, along with environmental variables such as time and load. The accumulated AE event curve of HAZ definitely have the point of inflection subject to tensile test. The results of the tensile test of HAZ come out electric shield arc welding ＞$CO_2$ gas arc welding＞TIG welding in case of single welding, but generally the tensile test of HAZ come out electric shield arc welding＞ TIG welding ＞ $CO_2$ gas arc welding. These history plots give us useful and powerful information to analyze the results of material evaluation testing.