• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.11a
• /
• pp.166-183
• /
• 1995

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.933-940
• /
• 2024

A macroscopic cross section generation model was developed for the conceptual horizontal, compact high temperature gas reactor (HC-HTGR). Because there are many sources of spectral effects in the design and analysis of the core, conventional LWR methods have limitations for accurate simulation of the HC-HTGR using a neutron diffusion core neutronics simulator. Several super-cell model configurations were investigated to consider the spectral effect of neighboring cells. A new history variable was introduced for the existing library format to more accurately account for the history effect from neighboring nodes and reactivity control drums. The macroscopic cross section library was validated through comparison with cross sections generated using full core Monte Carlo models and single cell cross section for both 3D core steady-state problems and 2D and 3D depletion problems. Core calculations were then performed with the AGREE HTR neutronics and thermal-fluid core simulator using super-cell cross sections. With the new history variable, the super-cell cross sections were in good agreement with the full core cross sections even for problems with significant spectrum change during fuel shuffling and depletion.

• Korean Journal of Veterinary Research
• /
• v.48 no.3
• /
• pp.267-274
• /
• 2008

This study was to evaluate the efficacy of single dose Mycoplasma hyopneumoniae (M. hyo)-vaccination in the swine farms which had different serological patterns of porcine reproductive and respiratory syndrome virus (PRRSV) and porcine circovirus type 2 (PCV2). A minimum of 240 pigs from each farm was applied, allocating M. hyo vaccinated and control groups. The PRRSV and PCV2 infections were analyzed by serological method (commercial ELISA kit). After administrating pigs a single dose of M. hyo vaccine or control saline at 3 weeks of age, serum antibodies to M. hyo, PRRSV and PCV2 were monitored at 4, 10, 16 and 22 weeks of age. Mortality, weight changes, feed conversion ratio (FCR) and lung score were also evaluated. A single-dose vaccination of M. hyo bacterin was efficacious to reduce mycoplasmal lung lesions and induce good humoral immune response. However, FCR was improved only in one of the three farms where showed seronegative status to both PRRSV and PCV2 in the period from 4 to 16 weeks of age. These results might imply that M. hyo vaccine alone could not overcome the PRRSV and PCV2 infection-associated wasting in the field condition. Therefore, the control of PRRSV and PCV2 should be considered to obtain the better effects of M. hyo vaccination.

• Archives of Plastic Surgery
• /
• v.44 no.1
• /
• pp.53-58
• /
• 2017

Background Adequate fixation of replanted digits is essential not only for short-term healing but for long-term function. Various bony fixation methods using Kirschner (K-) and intraosseous wire are available in replantation. We examined clinical and radiographic outcomes of fixation methods on bone union after digital replantation. Methods A single institutional retrospective review identified 992 patients who had undergone 1,247 successful replantations between July 2009 and September 2015. Exclusion criteria included amputations of the distal phalanx, comminuted fractures, and intra-articular fractures. Patients were classified according to 5 categories of fixation methods: single K-wire, double longitudinal K-wires, cross K-wires, wire with, and wire without K-wire support. Bone union was evaluated by 5-month postoperative X-ray and fixation outcomes were compared across the 5 groups. Results The exclusion criteria were applied, and 88 patients with 103 replanted digits remained for analysis. Single K-wire fixation was used in 40 digits, double longitudinal K-wires in 30, and cross fixation in 14. Wire with and without K-wire support was required in 15 and 4 digits. Nonunion was observed in 32 digits (31.1%), of which 13 required additional operations such as bone graft or corrective osteotomy. The highest percent of nonunion was observed after cross fixation (35.7%) and the lowest after wire alone (25.0%). Conclusions In this study, contrary to general knowledge, we found that single K-wire fixation was not associated with poorer outcomes. Successful bone union outcomes may be achieved by careful selection of bone fixation methods. This study provides useful information for planning bone fixation in digital replantation.

• Korean Journal of Cognitive Science
• /
• v.10 no.1
• /
• pp.25-43
• /
• 1999

The focus of this study is on the elements of structure design that facilitate u user interaction with applications within cyberspace Structure design entails decisions regarding the optimal classification and hierarchical organization of information into s successively higher units. i.e .. the grouping of highly related information in the form of nodes of a site and the subsequent connection of nodes that are inter-related. The decisions are based on the designer's subjective classification framework. which is not always compatible with that of the user. We propose that the ensuing cognitive dissonance can be reduced via the employment of multiple hierarchies and cross-referencing links. Multiple hierarchies represent a single information space in terms of a number of single hierarchies. each of which represent a different perspective Cross-referencing refers to the inter-connection between the constituent hierarchies by providing a link to the alternate hierarchy for information that is most likely to be categorized in diverse manners by users with differing perspectives. In this study we conducted two empirical studies to gauge the effectiveness of multiple hierarchies and Cross-referencing links in the domain of cyber shopping malls. In the first phase. an experiment was conducted to determine how subjects classified given products with respect to two different perspectives for categorization. Experimental cyber malls were developed based on the results from the first phase to test the effectiveness of multiple hierarchies and cross-referencing links. Results show that the ease of navigation was higher for cyber malls that had implemented cross-referencing links are of greater value when used in conjunction with single hierarchical designs rather than multiple hierarchies. Users satisfaction with and ease of navigation was higher for cyber malls that had not implemented multiple hierarchies. This paper concludes with discussion of these results and their implications for designers of cyber malls.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3E
• /
• pp.31-37
• /
• 2001

Finite element model of a cMUT is constructed using the commercial code ANSYS to analyze the cross talk mechanism. Calculation results of the complex load impedance seen by single capacitor cells are presented, and then followed by a calculation of the plane wave real load impedance seen by a parallel combination of many cells that are used to make a transducer. Cross talk between 1-D array elements is found to be due to two main sources: coupling through a Stoneley wave propagating at the transducer-water interface and coupling through Lamb waves propagating in the substrate. To reduce the cross talk level, the effect of various structural variations of the substrate are investigated, which include a change of its thickness and etched trenches or polymer walls between array elements.

• Journal of Integrative Natural Science
• /
• v.5 no.2
• /
• pp.135-138
• /
• 2012

The reduction of efficiency of missing observations on complete diallel cross designs are examined. we studies robustness of optimal block designs for estimating general combining ability against loss of missing observations in diallel cross. A-efficiencies suggest that these designs are fairly robust. Simple g-inverses may be found for the information matrices of the line effects which allow evaluation of expressions for the variances of the differences between the pairs of line effects with missing observations. we numerically calculate the reduction of efficiency for estimating general combining ability against loss of missing observations in diallel cross.

• Journal of Korea Multimedia Society
• /
• v.25 no.6
• /
• pp.819-832
• /
• 2022

Cross-domain recommender system transfers knowledge across different domains to improve the recommendation performance in a target domain that has a relatively sparse model. However, they suffer from the "negative transfer" in which transferred knowledge operates as noise. This paper proposes a novel Multiple Fusion-based Deep Cross-Domain Recommendation named MFDCR. We exploit Doc2Vec, one of the famous word embedding techniques, to fuse data user-wise and transfer knowledge across multi-domains. It alleviates the "negative transfer" problem. Additionally, we introduce a simple multi-layer perception to learn the user-item interactions and predict the possibility of preferring items by users. Extensive experiments with three domain datasets from one of the most famous services Amazon demonstrate that MFDCR outperforms recent single and cross-domain recommendation algorithms. Furthermore, experimental results show that MFDCR can address the problem of "negative transfer" and improve recommendation performance for multiple domains simultaneously. In addition, we show that our approach is efficient in extending toward more domains.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.404-404
• /
• 2000

This paper presents a single vision-based sel(-localization method in an corridor environment. We use the Hough transform for finding parallel lines and vertical lines. And we use these cross points as feature points and it is calculated relative distance from mobile robot to these points. For matching environment map to feature points, searching window is defined and self-localization is performed by matching procedure. The result shows the suitability of this method by experiment.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.2
• /
• pp.163-175
• /
• 2007

[ $ulcorner$ ]Cost-Effectiveness Analysis$\lrcorner$ has been wifely used to evaluate economic efficiency of R&D projects, but most of cost-effectiveness evaluation systems have some problems such as systematic method for setting and evaluating cost factors, estimation of single effect on each R&D project, and estimation of cross effects among R&D projects. To solve these problems, we have designed a new evaluation indicator called a $ulcorner$Cost-Cross Effect Integration Indicator$lrcorner$ including cross effects developed in this research. The major research findings are summarized as follows : (1) $ulcorner$Coist Estimation Model$lrcorner$, which estimates the cost factors divided into two classes of assembly product and system product and then integrates the total cost values, has been designed. (2) A new method for estimating parameters of cross effects among R&D projects has been developed. (3) $ulcorner$Cross Effects Estimation Model$lrcorner$ to estimate multi-effects and cross effects by completion time among several projects has been designed. (4) $ulcorner$Integration Estimation Indicator$lrcorner$ for setting priority on a project group has been extracted by combination of total cost value and total effect value.