• 한국정보과학회논문지:정보통신
• /
• 제34권5호
• /
• pp.396-404
• /
• 2007

본 논문에서는 다수의 라디오와 채널을 사용하는 무선 애드혹 통신망에서 대역폭 측정을 기반으로 호 접속 제어와 연동되는 애드혹 라우팅 프로토콜을 제안한다. 단일 라디오에 단일 채널을 사용하는 기존 애드혹 노드와 달리 제안한 MCQosR(Multiple Channel Quality of Service Routing) 프로토콜에서는 각 노드가 다수의 채널과 라디오를 사용하여 노드사이에 전이중 통신을 가능하게 하고 경로의 내부 간섭을 감소시켰다. 또한 각 노드마다 수신전용의 고정된 채널을 갖도록 하였으며, 대역폭 측정을 기반으로 새로운 호에 대한 수락제어를 수행함으로써 QoS 제공을 가능하도록 하였다 제안된 프로토콜은 시뮬레이션을 통하여 성능을 검증하였다.

• 대한전자공학회논문지TC
• /
• 제41권11호
• /
• pp.81-86
• /
• 2004

부호분할다중접속(CDMA: Code Division Multiple Access) 시스템의 역방향링크에서 수신 빔 성형 기법을 사용할 경우, 빔 성형 이득을 얻는 반면 전력 제어에 의해 불충분한 파일롯 전력으로 인해 채널 추정이 부정확해진다. 이 논문에서는 상관된 단일-입력 다중-출력(SIMO: Single-Input Multiple-Output) 채널에서 불충분한 파일롯 전력으로 인한 문제를 해결하기 위한 수신 빔 성형 방식을 제안하고자 한다. 제안된 복합형 빔 성형 방식(hybrid beamformer)은 수신 안테나들을 그룹 지어서, 각 그룹 당 수신 빔 방향(DOA: Direction-of-Arrival) 기반의 빔 성형 후에, 그룹별 출력을 최대 비 결합(MRC: Maxim Ratio Combining)하는 방식으로, 공간적으로 상관된 SIMO 채널의 디버시티 이득을 얻으면서 더 정확한 채널추정과 간섭제거 효과를 제공한다. 배열 안테나의 수가 여섯 개 이상인 경우, 복합형 빔 성형 방식은 빔 수신 각 범위(AOS: Angle-of-Spread)가 30°이하에서 일반적인 MRC 빔 성형 방식보다 더 좋은 성능을 보인다.

• ETRI Journal
• /
• 제38권5호
• /
• pp.847-857
• /
• 2016

Broadcasting services such as multi/single channel HDTV and 3DTV/2DTV use a multi-channel encoder that changes the bitrate and composition of the video service depending on the time. However, this type of multi-channel encoder could cause a longer latency owing to the variable bitrate and relatively bigger size of the buffers, which results in the same delay as in 3DTV even for a conventional DTV service. On the other hand, systems built based on separate encoders, each of which is optimized for the target service, might not have such latency problems. Nevertheless, there might be a distortion problem in the image and sound at the time of a switchover between two encoders with different output bitrates and group of picture structures. This paper proposes a system that can realize a seamless video service conversion using two different video encoders optimized for each video service. An overall functional description of the video service change control server, which is a main control block for the proposed system, is also provided. The experiment results confirm the seamless switchover and reduced broadcasting latency of DTV services compared with a broadcasting system composed of a multi-channel encoder system.

• Journal of Communications and Networks
• /
• 제5권1호
• /
• pp.25-32
• /
• 2003

4G mobile communication system requires the throughput of 10-100Mbps. Adaptive modulated OFDM system is promising technique for increasing the throughput. In the pilot symbol assisted high-speed packet transmission system, the data symbol duration is generally considered to be small compared to the coherence time. However, OFDM symbol duration is longer than the symbol duration of a single carrier system, so that the packet duration of the pilot symbol assisted high speed packet transmission system is long. In this case, the change of channel conditions is too fast to be accurately estimated by channel estimator at the receiver in high Doppler frequency, so that many errors occur during demodulation, especially with the data symbols at the end of each packet. In this paper, we consider the BER at various instantaneous $E_b/N_o$ that includes the demodulation errors in high Doppler frequency. When the coherence time is ten times longer than the duration of a single packet, the channel can be closely approximated as an AWGN channel. Otherwise, the approximation breaks down and the above-mentioned errors that occur during demodulation must be taken into consideration. In this paper, we propose the pilot symbol assisted high speed packet transmission system based on adaptive OFDM using a novel lookup table to consider the demodulated errors and evaluate the throughput performance.

• Journal of Communications and Networks
• /
• 제13권5호
• /
• pp.456-462
• /
• 2011

This paper investigates the outage behavior of peak interference power limited cognitive radio (CR) networks with multiple transmit antennas. In CR-multi-input single-output (MISO) channel, the total transmit power is distributed over the transmitantennas. First, we use the orthogonal space-time codes (STC) to achieve the transmit diversity at CR-receiver (rx) and investigate the effect of the power distribution on the interference power received at the primary-receiver (P-rx). Then, we investigate the transmit antenna selection (TAS) scheme in which the CR system selects the best transmit antenna and allocates all the power to the selected best antenna. Two transmit antenna selection strategies are proposed depending on if feedback channel is available or not. We derive the closed form expressions of outage probability and outage capacity of all schemes with arbitrary number of transmit-antennas. We show that the proposed schemes significantly improve the outage capacity over the single antenna systems in Rayleigh fading environment. We also show that TAS based scheme outperforms the STC based scheme when peak interference power constraint is imposed on the P-rx only if a feedback channel from CR-rx to CR-transmitter is available.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.445-455
• /
• 2020

Shear lag phenomenon has long been taken into consideration in various structural codes; however, the AISC provisions have not proposed any specific equation to calculate the shear lag ratio in some cases such as fillet-welded connections of front-to-front double channel sections. Moreover, those equations and formulas proposed by structural codes are based on the studies that were conducted on riveted and bolted connections, and can be applied to single channel sections whilst using them for fillet-welded double channels would be extremely conservative due to the symmetrical shape and the fact that bending moments will not develop in the gusset plate, resulting in less stress concentration. Numerical models are used in the present study to focus on parametric investigation of the shear lag effect on fillet-welded tension connection of double channel section to a gusset plate. The connection length, the eccentricity of axial load, the free length and the thickness of gusset plate are considered as the key factors in this study. The results are then compared to the estimates driven from the AISC-LRFD provisions and alternative equations are proposed.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1218-1230
• /
• 2019

A sub-channel solver, named ${\underline{S}}teady$ and ${\underline{T}}ransient$ ${\underline{A}}nalyzer$ for ${\underline{R}}eactor$ ${\underline{T}}hermal$ hydraulics (START), has been developed using the homogenous model for two-phase conditions of light water reactors. The code is developed as a fast and accurate TH-solver for coupled and multi-physics calculations. START has been validated against the NUPEC PWR Sub-channel and Bundle Test (PSBT) database. Tests like single-channel quality and void-fraction for steady state, outlet fluid temperature for steady state, rod-bundle quality and void-fraction for both steady state and transient conditions have been analyzed and compared with experimental values. Results reveal a good accuracy of solution for both steady state and transient scenarios. Axially different values for turbulent mixing coefficient are used based on different grid-spacer types. This provides better results as compared to using a single value of turbulent mixing coefficient. Code-to-code evaluation of PSBT results by the START code compares well with other industrial codes. The START code has been parallelized with the OpenMP algorithm and its numerical performance is evaluated with a large whole PWR core. Scaling study of START shows a good parallel performance.

• 지구물리와물리탐사
• /
• 제17권4호
• /
• pp.231-241
• /
• 2014

최근 엔지니어링 목적의 단일채널 탄성파 탐사가 많이 수행되고 있다. 단일채널 탄성파 탐사는 일반적으로 특별한 자료처리 없이 효율적으로 지하 지질구조를 파악할 수 있는 장점이 있지만, 복잡한 지질구조에 대한 정확한 영상화에는 한계를 가진다. 자원개발 목적의 다중채널 탄성파 탐사에서는 최근 파형역산에 대한 연구가 활발히 진행되고 있으며, 복잡한 지하구조에 대해서도 정확한 지하영상화 결과를 제시하고 있다. 이에 본 논문에서는 단일채널 탄성파 탐사 자료를 이용하여 지하 속도모델을 구하기 위한 탄성파 파형역산 알고리즘을 제안하였다. 제안한 알고리즘은 단일채널 탄성파 탐사를 고려하여 지하 매질을 1차원으로 가정하였으며, 벌림에 의한 지연시간을 제거하여 벌림에 의한 효과를 보정하였다. 파형역산은 안정적인 해의 계산이 가능한 가우스-뉴턴법을 이용하였다. 알고리즘은 수정된 Marmousi2 모델에 적용하여 검증하였으며, 부산항에서 얻은 현장자료에 적용해 보았다.

• 지구물리와물리탐사
• /
• 제13권4호
• /
• pp.336-348
• /
• 2010

한-중 해저터널 후보지로 선정된 대천-원산도 지역의 부지조사를 위해 버블펄서(Bubble pulser) 음원을 이용한 단일채널 탄성파 탐사와 시추조사가 2008년 및 2009년에 수행되었다. 본 연구는 이 단일채널 탐사자료를 정밀 처리하고 시추자료와 연계하여 후보지역의 해저터널 안정성 평가와 시공설계에 필요한 기반암 심도 및 특성을 분석하는데 목적이 있다. 이를 위해 일반적으로 다중채널 탄성파자료에 적용되던 자료처리 기법 중 주파수-파수영역 필터링(F-K filtering)을 적용하여 교류전원잡음 등을 제거하고, 중합후 심도구조보정(post-stack depth migration) 기법을 적용하여 심도단면을 제작하였다. 수행 결과 단일채널 탄성파자료로부터 향상된 심도영역단면을 제작할 수 있음을 확인하였고, 시추자료와 통합 해석을 통하여 조사지역의 개략적인 기반암 분포와 지질특성을 파악할 수 있었다. 단층, 파쇄대 등의 세밀한 구조 파악은 버블펄서 음원과 단일채널 자료의 특성상 어려웠으나, 좀 더 해상도가 높은 탄성파자료가 있을 시 가능할 것으로 보인다. 이에 향후 해저터널 탐사 시 고해상자료를 얻기 위한 추천사항을 수록하였다.

• 한국통신학회논문지
• /
• 제28권4C호
• /
• pp.384-391
• /
• 2003

Blind channel identification and equalization attempt to identify the communication channel and to remove the inter-symbol interference caused by a communication channel without using any known trainning sequences. In this paper, we propose a blind adaptive channel identification and equalization algorithm with phase offset compensation for single-input multiple-output (SIMO) channel. It is based on the one-step forward multichannel linear prediction error method and can be implemented by an RLS algorithm. Phase offset problem, we use a blind adaptive algorithm called the constant modulus derotator (CMD) algorithm based on condtant modulus algorithm (CMA). Moreover, unlike many known subspace (SS) methods or cross relation (CR) methods, our proposed algorithms do not require channel order estimation. Therefore, our algorithms are robust to channel order mismatch.