• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.2028-2037
• /
• 2009

This paper presents the simulator for dynamic modeling of a MT(micro turbine) during start-up period. The simulator is implemented by modeling a dynamic power of main components of a MT including compressor, combustor and turbine. A modeling for a MT under steady state operation can be accurately built from thermodynamics analysis. But dynamic modeling during start-up period is very difficult because efficiency of main components is very low and the designed value has big error and nonlinear characteristics during start-up. In this paper, new method without using thermodynamics analysis during start-up is proposed for the simulator. The power models of main components are derived from analysis of the experimental operation data by test motoring using a electric starter under constant power output. The simulator is developed using MATLAB/Simulink. For constant power output control, sensorless vector inverter is designed and algorithms for starting from stall and method for controling a output power are proposed. The performance of developed simulator is verified by comparing experimental and simulation start-up results.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.147-151
• /
• 2001

Based on flight software modeling experiences on satellite simulator developments so far, three different approaches for modeling the flight software within the satellite simulator such as utilization of a processor emulator executing the actual flight software image, re-compilation of the flight software sources within the simulator infrastructure, and development of a set of abstract models representing the required flight software functionality are presented.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1997.04a
• /
• pp.23-28
• /
• 1997

We discuss development of a simulator for automated manufacturing systems (AMSs) which have sophisticated automated material handling equipments and complicated work flows. The simulator is designed to satisfy the following requirements. A user should be able to easily configure or specify an AMS through a graphical user interface (GUI) and minimal data input. The user should be able to model diverse and complied control logic for automated material handling systems like automated guided vehicle (AGV) systems, robot workcell systems and conveyor systems as well as complicated job flow program. Real time animation is desired. Finally, the simulator should be easily maintained and extended. To satisfy the requirements, we use an object-oriented paradigm for modeling, designing, and programming of the simulator. We use an object-oriented modeling framework to design the modeling elements library, and take the process interaction approach for scheduling processes and events. To model a user-defined diverse control logic, we also develop a script language and its interpreter. We explain design and implementation strategies. We implement the simulator using Visual C++ 4.2 and Open GL on Windows NT and the Windows95. Some modeling examples will be demonstrated.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.2
• /
• pp.88-96
• /
• 2005

At present, the Korean electricity industry is undergoing restructuring and the Cost Based-generation Pool(CBP) market is being operated preparing for Two Way Bidding Pool(TWBP) market open. As the circumstance of the traditional system is changed according to power system deregulation, the simulation tool which should reflect market code providing market operating mechanism is needed to analyze an electricity market. This paper presents the development of an unique market simulator, Market Modeling and Price Simulator(MMPS) that is designed to imitate the Korean electricity market considering uniform price. The MMPS is developed in VB.NET and is composed of two modules that consist of market modeling and price simulation interfacing access database program. To evidence the features and the performance of MMPS, a small two way bidding market with 12-bus system and one way bidding market for generator competition will be presented for the electricity market simulations using MMPS.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.253-258
• /
• 2002

This paper proposes a methodology for development of protocol models. The methodology attempts to employ two modeling environments in models development, NS2 and DEVSim++, which will interoperate during simulation. NS2 is a widely used network simulator in protocol research, which employs an informal modeling approach. Within the approach time and state information of protocol models are not explicitly described, thus being hard to validate model. On the other hand the DEVS formalism is a mathematical framework for modeling a discrete event system in a hierarchical, modular manner. In DEVS, model's time and state information is described explicitly, By using DEVS formalism, models can easily be validated and errors in the modeling stage can be reduced. However, the DEVS simulator, DEVSim++, supports a small amount of models library which are required to build simulation models of general communication network. Although NS2 employs an informal modeling approach and models validation is difficult, it supports abundant models library validated by experimental users. Thus, combination of DEVS models and NS2 models may be an effective solution for network modeling. Such combination requires interoperation between DEVSim++ simulator and NS2 simulator. This paper develops an environment for such interoperation. Correctness and effectiveness of the implemented interoperation environment have been validated by simulation of UDP and TCP models.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.600-602
• /
• 2006

Some abnormal signals diagnostics and analysis through an important equivalent circuits modeling for passive elements under severe accident conditions have been performed. Unlike the design basis accidents, there are inherently some uncertainties in the instrumentation capabilities under the accident conditions. So, the circuit simulation analysis and diagnosis methods are used to assess instruments in detail when they give apparently abnormal readings as an accident alternative method. The simulations can be useful to investigate what the signal and circuit characteristics would be when similar to a variety of symptoms that can result from the environmental conditions such as high temperature, humidity, and pressure condition. In this paper, a new simulator through an analysis of the important equivalent circuits modeling under temperature accident conditions has been designed, the designed simulator is composed of the LabVIEW code as a main tool and the out-put file of the Multi-SIM code as an engine tool is exported to in-put file of the LabVIEW code. The procedure for the simulator design was divided into two design steps, of which the first step was the diagnosis method, the second step was the circuit simulator for the signal processing tool. It has three main functions which are a signal processing tool, an accident management tool, and an additional guide from the initial screen. This simulator should be possible that it could be applied a output signal analysis to some transient signal by variation of the resistance passive elements in the R-L-C equivalent circuit modeling under various degraded conditions in NPPs.

• Journal of the Korea Society for Simulation
• /
• v.10 no.3
• /
• pp.1-14
• /
• 2001

A hybrid system is defined as a mixture of continuous systems and discrete event systems. This paper first proposes a framework for hybrid systems modeling, called Hybrid Discrete Event System Specification (HDEVS) formalism. It then presents a method for simulators interoperation in which a continuous system simulator and a discrete event simulator are executed together in a cooperative manner. The formalism can specify a hybrid system in a way that a continuos system and a discrete event system are separately modeled by their own specification formalisms with a support of well-defined interface. We call such interface an A/E converter for analog-to- event conversion and an E/A converter for event-to-analog conversion. Simulators interoperation is based on the concept of pre-simulation in which simulation time for a continuous simulator is advanced in accordance with a discrete event simulator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.878-884
• /
• 2015

In this paper, Power Management System(PMS) simulator for Liquid Nature Gas Carrier(LNGC) is developed. Major components of power system for LNGC, such as generator, diesel engine and governor, transformer, circuit breaker, and 3 phase loads models are built based on MATLAB/SIMULINK. With these designed major parts, PMS simulator modeling is carried out. Based on MATLAB/Graphical User Interface, PMS simulator control for LNGC, and Human Machine Interface for monitoring is designed. PMS simulator for LNGC carries out simulation according to sequence of characteristics analysis. By comparing results of predicted simulation for each sequence to that of characteristics analysis, the reliability of PMS simulator for LNGC will be verified.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.126-134
• /
• 2006

The object oriented co-modeling methodology, previously introduced, employs a layered approach in war game models development in which an upper layer models abstract behavior of an object and a lower one models details of the object. Within the methodology military domain experts and simulation experts models an object at the upper and the lower layers, respectively in concurrent manner. This paper proposes a method of constructing a war game simulator using parametric behavior modeling technique, which provides a means for military domain experts/users to change model's detailed behavior with no knowledge on modeling semantics. The proposed simulator would support new algorithms or strategies with minimal cost and could be modified even by the users who are ignorant about modeling technique. To demonstrate the effectiveness of the proposed framework, a naval war game simulator is exemplified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.405-413
• /
• 2011

Defense Systems Test Center in ADD supports increasingly various missile test requirements such as higher altitude event, multi target operation and low-altitude, high velocity target tracking. In this paper, we have proposed the development of instrumentation radar tracking status simulator based on virtual reality. This simulator can predict the tracking status and risk of failure using several modeling algorithms. It consists of target model, radar model, environment model and several algorithms includes the multipath interference effects. Simulation results show that the predict tracking status and signal are similar to the test results of the live flight test. This simulator predicts and analyze all of the status and critical parameters such as the optimal site location, servo response, optimal flight trajectory, LOS(Line of Sight). This simulator provides the mission plan with a powerful M&S tool to rehearse and analyze instrumentation tracking radar measurement plan for live flight test at DSTC(Defense Systems Test Center).