• Journal of Computational Design and Engineering
• /
• v.1 no.4
• /
• pp.233-242
• /
• 2014

A magnetically levitated vehicle (Maglev) system is under commercialization as a new transportation system in Korea. The Maglev is operated by an unmanned automatic control system. Therefore, the plan of train operation should be carefully established and validated in advance. In general, when making a train operation plan, statistically predicted traffic data is used. However, a traffic wave often occurs in real train service, and demand-driven simulation technology is required to review a train operation plan and service quality considering traffic waves. We propose a method and model to simulate Maglev operation considering continuous demand changes. For this purpose, we employed a discrete event model that is suitable for modeling the behavior of railway passenger transportation. We modeled the system hierarchically using discrete event system specification (DEVS) formalism. In addition, through implementation and an experiment using the DEVSim++ simulation environment, we tested the feasibility of the proposed model. Our experimental results also verified that our demand-driven simulation technology can be used for a priori review of train operation plans and strategies.

• International Journal of Quality Innovation
• /
• v.8 no.2
• /
• pp.100-114
• /
• 2007

Decision makers in the service industry must effectively cope with queuing problems, service capacity optimization, service efficiency and service quality problems. This study proposes a computer simulation-enabled MCDM framework that integrates computer simulation analysis, Taguchi method, expert opinion and multiple criteria decision making (MCDM) to assist decision makers in coping with decision problems. In this framework, Taguchi method is adopted to reduce the time required for the simulation experiment. Computer simulation analysis is adopted to obtain useful information for rapid decision-making without interrupting actual production. MCDM is used to select the optimal alternative. The illustrative result is extremely promising.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.37-37
• /
• 2010

In these days $SF_6$ mixtures and alternative gas has been studied because of global warming. so although many studies have been carried out about binary gas mixtures with $SF_6$, few studies were presented about breakdown characteristics of $SF_6/N_2$ mixtures. In this paper, breakdown experiment values and breakdown simulation value are compared. Streamer theory was used for predicting breakdown voltage. For accurate simulation, this simulation apply utilization factor using CST program. AC breakdown experiments in non-uniform field was performed to compare with the breakdown simulation values. But with gap lengths increasing, the breakdown voltage is saturated. So simulation need surface roughness factor.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.110-112
• /
• 2003

A numerical simulation of an incompressible cavity flow is conducted using turbulence models. Cavity geometry and flow conditions are based on Cattafesta's experiment. Baldwin-Lomax model and ${\kappa}-{\varpi}$ model are employed. While simulation with Baldwin-Lomax model predicts the oscillatory features of the flow, the use of ${\kappa}-{\varpi}$ model in its original form makes the simulation converge to steady flow. To acquire oscillatory flow solution, Kato-Launder form and Time scale bound are adopted in production term of ${\kappa}-{\varpi}$ model. The strouhal number of the flow oscillations from the simulation results corresponds to 1 st mode in simulation but 2 nd mode in experiments. However mean velocity profile is in good agreement with the experimental data and the fluctuation profile follows the tendency of Cattafesta's results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1018-1021
• /
• 1997

This paper presents a result of simulation and improvement of grinding process for linear motion guide blocks. A simulation software, which is based on cylindrical grinding process. is used to predict the grinding wheel wear during the grinding process. To validate the simulation, the simulation result is compared with the experimental one. Simulation study is extended to obtain an optimal grinding condition for minimizing the grinding wheel wear. The optimal condition is validated through an experiment.

• Journal of the Korea Society for Simulation
• /
• v.10 no.1
• /
• pp.51-62
• /
• 2001

For the productivity improvement, it is necessary to analyze problem of the system and evaluate alternative plans. But, it if hard to experiment and evaluate alternative plans in real existing system. Therefore, it is necessary to synthetically analyze and evaluate alternative plans using simulation and statistical analysis method. In this case study, as a simulation language, Promodel is used to compare and evaluate four alternatives which are considered to improve the productivity of an object system. The object system is constituted of a pretreatment line and a painting line. The purpose of this study is to analyze whether the decrease of the down time in pretreatment line can be effective to the productivity improve comparing with exiting system and other alternatives. The other purpose is to choose an alternative that has the best productivity improvement. The results of the simulation show that the possibility of improvement in productivity by decreasing the down time of pretreatment line. Two-Stage Bonferroni Procedure is used to choose the best alternative.

• Journal of Information Processing Systems
• /
• v.9 no.3
• /
• pp.489-498
• /
• 2013

In this paper, we propose a common simulation model that can be reused for different performance evaluations of networked virtual environments. To this end, we analyzed the common features of NVEs, in which multiple regions compose a shared space, and where a user has his/her own interest area. Communication architecture can be client-server or peer-server models. In usual simulations, users move around the world while the number of users varies with the system. Our model provides various simulation parameters to customize the region configuration and user movement pattern. Furthermore, our model introduces a way to mimic a lot of users in a minimal experiment environment. The proposed model is integrated with our network framework, which supports various scalability approaches. We specifically applied our model to the interest management and load distribution schemes to evaluate communication overhead. With the proposed simulation model, a new simulation can be easily designed in a large-scale environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.4
• /
• pp.14-21
• /
• 2012

This paper study a method of modeling and simulation of LED driver circuit for a design optimization. Simplified LED modeling is introduced and a driver IC, HV9910, is modeled by implementing the major function blocks. Circuit of buck type converter is constructed for simulation. Simulation includes not only the internal function of IC but also the various performance results such as LED array current control and dimming. Experiment results are also shown to prove the verification of its usage. This results show that the simulation approach is valid for a circuit optimization and a reduction of development time.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.2
• /
• pp.170-180
• /
• 2000

The equation which is related to TXV performance was investigated. On the basis of this equation, the TXV simulation program was developed. Results of the developed TXV simulation program were proven by the experiment on the influence of pressure difference between TXV entrance and exit and equalizing pressure. Simulation results show very good agreement with experimental results, the RMS error between them was 1.83%. The capillary tube simulation program was made by the basic equation of fluid dynamics. Results of this program were proven by data which were experimented previously. The RMS error between simulation results and experimental results was 4.13% .

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.9-10
• /
• 2015

EI core inductor in power electronic circuit simulation is usually assumed as linear by using matrix model. However, nonlinear magnetic characteristics such as B-H characteristic are also important for the accurate simulation of the circuit behavior. To model nonlinear magnetic characteristics of EI core inductor with only DC bias table, this paper presents a method in PLECS simulation tool which is a commercially available simulation tool for power electronics circuit analysis. Comparing with ideal matrix model, the simplification and accuracy are improved by this modeling method. Also, compared to analysis by FEM, it is much simpler, faster and easier to simulate with power electronics circuit. Validation of the proposed model was verified by simulation and experiment results.