• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.944-944
• /
• 2012

Urbanization leads to a change of hydrologic responses because impervious area is increased by urbanization. Decrease of groundwater recharge and increase of overland flow are general hydrologic characteristics caused by urbanization. This can be a source of damages such as increased flooding and reduced groundwater levels. Daily streamflow in Gabcheon watershed, South Korea is simulated by ARCSWAT model, an extension of SWAT2005. After calibration and validation of model, the simulated daily streamflow from 1997 to 2001 are statistically analyzed. The phenomenon that $T_{Qmean}$ is inversly proportional to coefficient of variation for the simulated daily streamflow is demonstrated. Also, hydrologic response was more influenced by weather than land use for high flow. This study also examines the effect of land use change on daily streamflow with spatially and quantitatively different land use maps. The simulated stream flow is tested by Mann-Whitney method. The median between stream flows simulated for 1990 and 2000 land use maps is significantly different, but the simulated streamflow for spatially different land use maps is almost unchanged.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.78-82
• /
• 2003

In this paper, simulated annealing technique was used to estimate the rock joint characteristics, RMR(rock mass rating) values, to overcome the defects of ordinary kriging. Ordinary kriging reduced the variance of data, so lost the characteristics of distribution. Simulated annealing technique could reflect the distribution feature and the spatial correlation of the original data. Through the comparisons between three times simulations, the uncertainty of the simulation could be quantified, and sufficient results were obtained.

• Korean Journal of Agricultural Science
• /
• v.44 no.3
• /
• pp.332-338
• /
• 2017

This study was conducted to investigate the effect of 1-methylcyclopropene (1-MCP), a known ethylene action inhibitor, on fruit quality and incidence of physiological disorders during a simulated marketing period in new mid-season Asian pear (Pyrus pyrifolia Nakai) 'Changjo'. Flesh firmness of untreated control fruits was maintained with a hardness of 20.2 N until day 14 of simulated marketing but decreased rapidly to 6.2 N at day 21 of simulated marketing; losing its commercial quality. However, the firmness of 1-MCP treated fruits remained high (> 20.7 N) during the same period. Quality indices such as soluble solids content and titratable acidity in 'Changjo' pear did not show any significant differences during simulated marketing period regardless of 1-MCP treatment. For the difference in skin color, redness ($a^*$) tended to increase as simulated marketing period became longer, and 1-MCP treatment delayed this change by 7 days compared to the untreated fruits. No decrease occurred in ethylene production level with 1-MCP treatment in 'Changjo' pear. Meanwhile, 1-MCP treated pears showed a significantly lower respiration rate compared to the untreated fruits. Also, 1-MCP treatment effectively reduced the incidence of physiological disorders including internal flesh browning and mealiness symptoms during simulated marketing periods of 21 and 14 days, respectively. Therefore, we conclude that the use of 1-MCP is recommended for quality maintenance and for prevention of physiological disorders during simulated marketing periods of ${\geq}7days$ for mid-season Asian pear 'Changjo'.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.3
• /
• pp.95-105
• /
• 1988

This study refers to the development of a hydrologic model simulating daily inflow and release rates for irrigation reservoirs. A daily - based model is needed for adequate operation of an irrigation reservoir sufficing the water demand for paddy fields which is closely related to meteorological conditions. And the objective or this study is to develop a Daily Irrigation Reservoir Operation Model(DIROM) combining the inflow and the release models which depicts the daily water level fluctuations of an irrigation reservoir, and to evaluate the applicability of the model. DIROM was applied to four reservoirs and daily water levels were simulated and compared to the observed data. The model behaviour was also compared with that of a ten - day based model, Reservoir Operation Study(ROS) which has been applied for determining the design capacity of reservoirs. Various combinations of measured and simulated inflow and release rates for tested reservoirs were used to define the daily water level fluctuations. Simulated release rates and measured inflow data resulted in larger errors, and simulated inflow and release rates produced the smallest errors in water level comparison. Two resevoir operation models, DIROM and ROS were applied to the same reservoir and the simulation results compared. The computational errors of DIROM ware smaller than those of ROS, and DIROM was more sensitive to meteorological conditions. DIROM demonstrated its potenial applicability in water management and operation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1012-1015
• /
• 2004

There have been several kinds of attempts to actively control the deflected noise behind the noise barrier. Omoto's work in 1993 would be one of the fundamental studies, where he placed the control sources uniformly parallel to the noise barrier. Following this study, Yang pointed that the average distance between the noise source and control sources is more important than the arrangement of control sources such as a straight line or an arc type distribution. In 2004, Baek tried to show optimal arrangement of control sources while keeping the average distance between the noise source and control sources. He used simulated annealing algorithm which is one of the natural algorithms for the selections of optimal control source positions, but the searching technique was a hybrid of the simulated annealing and the sequential searching to adapt to the vast amount of searching time. This study is about the performance comparison between the pure sequential searching and the hybrid one. The simulation results show very similar performance and a pure simulated annealing searching will be more beneficial for the noise reduction performance but at the cost of computing time.

• Journal of Environmental Science International
• /
• v.14 no.11
• /
• pp.1015-1026
• /
• 2005

The southeastern coastal area of the Korean peninsula has a complex terrain including an irregular coastline and moderately high mountains. This implies that mesoscale circulations such as mountain-valley breeze and land-sea breeze can play an important role in wind field and ocean forcing. In this study, to improve the accuracy of complex coastal rind field(surface wind and sea surface wind), we carried out the sensitivity experiments based on PBL schemes in PSU/NCAR Mesoscale Model (MM5), which is being used in the operational system at Korea Meteorological Administration. Four widely used PBL parameterization schemes in sensitivity experiments were chosen: Medium-Range Forecast (MRF), High-resolution Blackadar, Eta, and Gayno-Seaman scheme. Thereafter, case(2004. 8. 26 - 8. 27) of weak-gradient flows was simulated, and the time series and the vertical profiles of the simulated wind speed and wind direction were compared with those of hourly surface observations (AWS, BUOY) and QuikSCAT data. In the simulated results, the strength of rind speed of all schemes was overestimated in complex coastal regions, while that of about four different schemes was underestimated in islands and over the sea. Sea surface wind using the Eta scheme showed the highest wind speed over the sea and its distribution was similar to the observational data. Horizontal distribution of the simulated wind direction was very similar to that of real observational data in case of all schemes. Simulated and observed vertical distribution of wind field was also similar under boundary layer(about 1 km), however the simulated wind speed was underestimated in upper layer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.27-32
• /
• 2019

This study describes the design and implementation of a simulated signal generator to demonstrate the performance of VHF band radar for the detection of small targets in RCS(Radar Cross Section). The transmission and reception antenna beam widths used in the simulated signal generating apparatus may be large, which may cause problems in the degree of isolation. Interference signal immunity and isolation characteristics are improved by considering operating conditions of VHF radar to solve isolation of antennas. Simulated signal generator performs the following: VHF radar transmission and reception correction, simulation signal generation, target Doppler, RCS and distance simulation, remote control, and GPS clock synchronization function. After the fabrication of the simulated signal generator, the main characteristics, such as the output characteristics and the reflection signal simulations, were tested. When the microwave radar assembly is completed in the future, it will be utilized for the performance evaluation of VHF radar.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.172-177
• /
• 2004

A planetary gear trains has characteristics in compactness, power transformation ability and constant meshing. Usability is increased in applications of auto transmission and industrial gearbox. Study on optimum design of planetary gear train has been progressed on minimization of weight, miniaturization of planetary gear train and improvement of high strength. There are demands of study for the planetary gear train required long lift estimation In this wort being considered life, strength, intereference, contact ratio and aspect ratio, the optimum design algorithm is proposed to reduce the volume of planetary gear train with transferring the same amount of power. In the design of algorithm for planetary gear train, the determination of teeth number is separated to achieve simplicity and the simulated annealing method as a global optimal technique is used for optimal design method.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.58-65
• /
• 2005

A planetary gear trains has characteristics in compactness, power transformation ability and constant meshing. Usability is increased in applications of auto transmission and industrial gearbox. Study on optimum design of planetary gear train has been progressed on miniaturization of weight, miniaturization of planetary gear train and improvement of high strength. There are demands of study f3r the planetary gear train required long life estimation. In this work being considered life, strength, interference, contact ratio and aspect ratio, the optimum design algorithm is proposed to reduce the volume of planetary gear train with transferring the same amount of power. In the design of algerian for planetary gear train, the determination of teeth number is separated to achieve simplicity and the simulated annealing method as a global optimal technique is used far optimal design method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.10
• /
• pp.819-826
• /
• 2001

Genetic algorithms are becoming more popular because of their relative simplicity and robustness. Genetic algorithms are global search techniques for nonlinear optimization. However, traditional genetic algorithms, though robust, are generally not the most successful optimization algorithm on any particular domain because they are poor at hill-climbing, whereas simulated annealing has the ability of probabilistic hill-climbing. Therefore, hybridizing a genetic algorithm with other algorithms can produce better performance than using the genetic algorithm or other algorithms independently. In this paper, we propose an efficient hybrid optimization algorithm named the adaptive random signal-based learning. Random signal-based learning is similar to the reinforcement learning of neural networks. This paper describes the application of genetic algorithms and simulated annealing to a random signal-based learning in order to generate the parameters and reinforcement signal of the random signal-based learning, respectively. The validity of the proposed algorithm is confirmed by applying it to two different examples.