• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.973-979
• /
• 2024

In the framework of the Generation IV research and development project, in which the French Commission of Alternative and Atomic Energies (CEA) is involved, a main objective for the design of Sodium-cooled Fast Reactor (SFR) is to meet the safety goals for severe accidents. Among the severe ones, the Unprotected Transient OverPower (UTOP) accidents can lead very quickly to a global melting of the core. UTOP accidents can be considered either as slow during a Control Rod Withdrawal (CRW) or as fast. The paper focuses on fast UTOP accidents, which occur in a few milliseconds, and three different scenarios are considered: rupture of the core support plate, uncontrolled passage of a gas bubble inside the core and core mechanical distortion such as a core flowering/compaction during an earthquake. Several levels and rates of reactivity insertions are also considered and the thermal-mechanical behavior of an ASTRID fuel pin from the ASTRID CFV core is simulated with the GERMINAL code. Two types of fuel pins are simulated, inner and outer core pins, and three different burn-up are considered. Moreover, the feedback from the CABRI programs on these type of transients is used in order to evaluate the failure mechanism in terms of kinetics of energy injection and fuel melting. The CABRI experiments complete the analysis made with GERMINAL calculations and have shown that three dominant mechanisms can be considered as responsible for pin failure or onset of pin degradation during ULOF/UTOP accident: molten cavity pressure loading, fuel-cladding mechanical interaction (FCMI) and fuel break-up. The study is one of the first step in fast UTOP accidents modelling with GERMINAL and it has shown that the code can already succeed in modelling these type of scenarios up to the sodium boiling point. The modeling of the radial propagation of the melting front, validated by comparison with CABRI tests, is already very efficient.

• 한국지진공학회논문집
• /
• 제9권5호
• /
• pp.75-86
• /
• 2005

성능에 기초한 설계법에서는 비선형 응답산정이 필수적이다. 이를 위한 해석법으로는 비선형 시간이력해석, 비선형 정적해석 혹은 비선형의 영향을 고려한 등가정적해석 등이 있다. 비선형 응답을 산정하기 위한 가장 정확한 해석방법은 비선형 시간이력해석법이지만, 많은 시간과 노력을 필요로 한다. 비선형 직접스펙트럼법은 pushover곡선으로부터 구조물의 선형 진동주기와 항복강도를 구한 다음, 반복계산 없이 비선형 응답을 직접 산정하는 약산법이다. 본 연구에서는 비선형 약산법들의 정확성과 신뢰성을 다양한 지진과 전단형 건물의 여러 가지 조건에 대해 검토하고자 한다. 본 연구의 결론은 다음과 같다. 1) 선형 능력스펙트럼법에 의한 약산응답들은 수렴하는 해를 구하지 못하거나 발산하는 경우가 발생하며 수렴하더라도 큰 오차가 발생하는 경우가 있으며, 지진별로 오차의 편차가 크다. 2) 비선형 능력스펙트럼법은 능력스펙트럼법보다 계산량이 크게 줄어들고, 해는 구해지나 요구곡선의 특성으로 정확한 해를 구하기 어려울 수 있으며, 전반적으로 큰 오차가 발생한다. 3) 비선형 직접스펙트럼법은 다른 약산법들에 비해 추가적이고 반복적인 계산과정 없이 pushover곡선과 비선형 응답스펙트럼으로부터 비교적 정확한 값을 직접 구할 수 있으므로 실용적인 방법으로 사료된다.

• 한국지반환경공학회 논문집
• /
• 제10권7호
• /
• pp.103-109
• /
• 2009

확률론적인 지진재해분석(PSHA)은 지진원, 전파경로, 부지효과의 불확실성을 고려하여 특정 기간내에 특정 크기를 초과하는 지진동이 부지에 발생할 확률을 결정하는 방법이다. PSHA은 전세계적으로 미래 발생할 지진동을 정량화하기 위하여 가장 널리 사용되는 방법이다. 본 논문에서는 기존의 PSHA와 동일한 결과를 계산하지만, 유한기간내에 발생하는 지진 시나리오와 이에 상응하는 지진파기록을 생성하는 신(新) PSHA 기법의 국내 적용성을 평가하였다. 신(新) PSHA으로 40,000년에 상응하는 가상의 지진기록을 생성하여 총 16,378개의 지진 시나리오를 생성하였으며 이를 사용하여 지진재해도를 생성한 결과, 신(新) PSHA은 상당히 정확하게 기존의 PSHA 결과를 재현할 수 있는 것으로 나타났다. 신(新) PSHA은 자체적으로 의미가 있다기 보다는 이의 결과를 통하여 궁극적으로 확률론적인 지진재해분석을 수행할 수 있다는 장점을 가지고 있다. 본 연구에서 생성된 지진기록은 동반논문에서 확률론적인 지진계수를 생성하는데 활용되었다.

• 한국지진공학회논문집
• /
• 제6권4호
• /
• pp.65-73
• /
• 2002

성능에 기초한 설계법에서는 비선형 응답산정이 필수적이며, 이를 위한 방법으로는 비선형시각이력해석법, 비선형 정적해석법, 비선형 효과를 고려한 등가선형해석법 등이 있다. 일부 규준에서는 pushover곡선으로부터 작성한 성능스펙트럼과 선형 응답스펙트럼으로부터 작성한 요구스펙트럼으로 이루어진 능력스펙트럼법을 제안하고 있다. 이 방법은 개념적으로는 간단하나 반복과정이 요구되며, 부정확한 결과를 산출하는 경우가 많다. 이에 따라 시행착오적인 등가선형 스펙트럼대신 비선형스펙트럼을 사용하는 방법들에 대한 연구들이 진행되고 있다. 비선형 요구스펙트럼은 표준적 선형 설계스펙트럼으로부터 결정될 수 있으며, 이 방법은 등가선형의 경우보다는 계산과정이 대폭 줄어들기는 하나 아직도 다소의 연산과정이 요구된다. 따라서 본 연구에서는 다자유도계의 구조물에 대한 pushover곡선으로부터 구조물의 진동주기와 항복강도를 구한 다음, 일련의 계산과정을 거치지 않고도, 직접적으로 비선형 최대응답을 구할 수 있는 비선형 직접스펙트럼법(NDSM)을 제시하극 집중질량계의 MDF(다자유도계) 모델에 대해 다양한 지진기록과 제하강성저하지수를 변수로 하여 NDSM의 적용성과 신뢰성을 평가하고자 한다. 본 연구의 결론은 다음과 같다. 1) 다자유도계 구조물에 대한 비선형 직접스펙트럼법에 의한 최대변위 응답은 비선형 시각이력해석법에 의한 응답과 거의 일치하므로 실용적인 방법으로 사료된다. 2) 비선형 직접스펙트럼법과 비선형 시각이력해석에 의해 산정된 죄상층 변위 결과를 비교하면, 항복후강성계수가 0.1, MAD(modal adaptive distribution)에 의한 수평정적하중분폰 그리고 제하강성저하지수가 0.2~O.3일 때 평균오차가 가장 줄어드는 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1735-1741
• /
• 2011

The safety of station structures among railway infrastructures should be considered as a top priority because hundreds of thousands passengers a day take a subway. The station structures, which have been being operated since the 1970s, are especially vulnerable to the earthquake and long-term vibrations such as ambient train vibrations as well. This is why the structural-health monitoring system of station structures should be required. For these reason, Korean government has made an effort to develop the structural health-monitoring system of them, which can evaluate the health-state of station structures as well as can monitor the vulnerable structural members in real-time. Then, through the monitoring system, the vulnerable structural members could be retrofitted. For the development of health-state evaluation method for station structures with the real-time sensing data measured in the fields, authors carried out the numerical simulations to develop evaluation algorithms based on statistical pattern recognition techniques. In this study, the dynamic behavior of Chungmuro station in Seoul was numerically analyzed and then critical members were chosen. Damages were artificially simulated at the selected critical members of the numerical model. And, the supervised and unsupervised learning based pattern recognition algorithms were applied to quantify and localize the structural defects.

• Wind and Structures
• /
• 제13권1호
• /
• pp.1-20
• /
• 2010

The recommended factored design wind load effects for overhead lattice transmission line towers by codes and standards are evaluated based on the applicable wind load factor, gust response factor and design wind speed. The current factors and design wind speed were developed considering linear elastic responses and selected notional target safety levels. However, information on the nonlinear inelastic responses of such towers under extreme dynamic wind loading, and on the structural capacity curves of the towers in relation to the design capacities, is lacking. The knowledge and assessment of the capacity curve, and its relation to the design strength, is important to evaluate the integrity and reliability of these towers. Such an assessment was performed in the present study, using a nonlinear static pushover (NSP) analysis and incremental dynamic analysis (IDA), both of which are commonly used in earthquake engineering. For the IDA, temporal and spatially varying wind speeds are simulated based on power spectral density and coherence functions. Numerical results show that the structural capacity curves of the tower determined from the NSP analysis depend on the load pattern, and that the curves determined from the nonlinear static pushover analysis are similar to those obtained from IDA.

• Structural Engineering and Mechanics
• /
• 제22권3호
• /
• pp.371-399
• /
• 2006

The theoretical background and capabilities of the developed program, SAR-CWF, for stochastic analysis of 3D reinforced-concrete shear wall-frame structures subject to seismic excitations is presented. Incremental stiffness and strength properties of system members are modeled by extended Roufaiel-Meyer hysteretic relation for bending while shear deformations for walls by Origin-Oriented hysteretic model. For the critical height of shear-walls, division to sub-elements is performed. Different yield capacities with respect to positive and negative bending, finite extensions of plastic hinges and P-${\delta}$ effects are considered while strength deterioration is controlled by accumulated hysteretic energy. Simulated strong motions are obtained from a Gaussian white-noise filtered through Kanai-Tajimi filter. Dynamic equations of motion for the system are formed according to constitutive and compatibility relations and then inserted into equivalent It$\hat{o}$-Stratonovich stochastic differential equations. A system reduction scheme based on the series expansion of eigen-modes of the undamaged structure is implemented. Time histories of seismic response statistics are obtained by utilizing the computer programs developed for different types of structures.

• Structural Engineering and Mechanics
• /
• 제47권5호
• /
• pp.599-622
• /
• 2013

Seismic response of two dimensional liquid tanks is numerically simulated using fully nonlinear velocity potential theory. Galerkin-weighted-residual based finite element method is used for solving the governing Laplace equation with fully nonlinear free surface boundary conditions and also for velocity recovery. Based on mixed Eulerian-Lagrangian (MEL) method, fourth order explicit Runge-Kutta scheme is used for time integration of free surface boundary conditions. A cubic-spline fitted regridding technique is used at every time step to eliminate possible numerical instabilities on account of Lagrangian node induced mesh distortion. An artificial surface damping term is used which mimics the viscosity induced damping and brings in numerical stability. Four earthquake motions have been suitably selected to study the effect of frequency content on the dynamic response of tank-liquid system. The nonlinear seismic response vis-a-vis linear response of rectangular liquid tank has been studied. The impulsive and convective components of hydrodynamic forces, e.g., base shear, overturning base moment and pressure distribution on tank-wall are quantified. It is observed that the convective response of tank-liquid system is very much sensitive to the frequency content of the ground motion. Such sensitivity is more pronounced in shallow tanks.

• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.971-983
• /
• 2015

To promote greater acceptance and use of composite RCS systems, a two-bay two-story frame specimen with improved composite RCS joint details was tested in the laboratory under reversed cyclic loading. The test revealed superior seismic performance with stable load versus story drift response and excellent deformation capacity for an inter-story drift ratio up to 1/25. It was found that the failure process of the frame meets the strong-column weak-beam criterion. Furthermore, cracking inter-story drift ratio and ultimate inter-story drift ratio both satisfy the limitation prescribed by the design code. Additionally, inter-story drift ratios at yielding and peak load stage provide reference data for Performance-Based Seismic Design (PBSD) approaches for composite RCS frames. An advantage over conventional reinforced concrete and steel moment frame systems is that the displacement ductility coefficient of the RCS frame system is much larger. To conclude, the test results prove that composite RCS frame systems perform satisfactorily under simulated earthquake action, which further validates the reliability of this innovative system. Based on the test result, some suggestions are presented for the design of composite RCS frame systems.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.699-718
• /
• 2015

The effect of reinforcing concrete members with high strength steel bars with yield strength up to 600 MPa on the overall seismic behavior of concrete moment frames was studied experimentally and numerically. Three geometrically identical plane frame models with two bays and two stories, where one frame model was reinforced with hot rolled bars (HRB) with a nominal yield strength of 335 MPa and the other two by high strength steel bars with a nominal yield strength of 600 MPa, were tested under simulated earthquake action considering different axial load ratios to investigate the hysteretic behavior, ductility, strength and stiffness degradation, energy dissipation and plastic deformation characteristics. Test results indicate that utilizing high strength reinforcement can improve the structural resilience, reduce residual deformation and achieve favorable distribution pattern of plastic hinges on beams and columns. The frame models reinforced with normal and high strength steel bars have comparable overall deformation capacity. Compared with the frame model subjected to a low axial load ratio, the ones under a higher axial load ratio exhibit more plump hysteretic loops. The proved reliable finite element analysis software DIANA was used for the numerical simulation of the tests. The analytical results agree well with the experimental results.