• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.366-368
• /
• 2002

This paper presents a technique that can obtain an optimal solution for the Security-Constrained Economic Dispatch (SCED) problems using the Interior Point Method (IPM) while taking into account of the power flow constraints. The SCED equations are formulated by using only the real power flow equations from the optimal power flow. Then an algorithm is presented that can linearize the SCED equations based on the relationships among generation real power outputs, loads, and transmission losses to obtain the optimal solutions by applying the linear programming (LP) technique. Finally, the application of the Primal Interior Point Method (PIPM) for solving the optimization problem based on the proposed linearized objective function is presented. The results are compared with the Simplex Method and the Promising results ard obtained.

• Journal of Preventive Medicine and Public Health
• /
• v.37 no.4
• /
• pp.366-372
• /
• 2004

Objectives : This study was conducted to propose a new transmission/disequilibrium test(TDT) to test the linkage between genetic markers and disease-susceptibility genes based on haplotypes. Simulation studies were performed to compare the proposed method with that of Zhao et al. in terms of type I error probability and powers. Methods : We estimated the haplotype frequencies using the expectation-maximization(EM) algorithm with parents genotypes taken from a trio dataset, and then constructed a two-way contingency table containing estimated frequencies to all possible pairs of parents haplotypes. We proposed a score test based on differences between column marginals and their corresponding row marginals. The test also involved a covariance structure of marginal differences and their variances. In simulation, we considered a coalescent model with three genetic markers of biallele to investigate the performance of the proposed test under six different configurations. Results : The haplotype-based TDT statistics, our test and Zhao et al.'s test satisfied a type I error probability, but the TDT test based on single locus showed a conservative trend. As expected, the tests based on haplotypes also had better powers than those based on single locus. Our test and that of Zhao et al. were comparable in powers. Conclusion : We proposed a TDT statistic based on haplotypes and showed through simulations that our test was more powerful than the single locus-based test. We will extend our method to multiplex data with affected and/or unaffected sibling(s) or simplex data having only one parent s genotype.

• ALGAE
• /
• v.29 no.2
• /
• pp.75-99
• /
• 2014

A small dinoflagellate, Ansanella granifera gen. et sp. nov., was isolated from estuarine and marine waters, and examined by light microscopy, scanning electron microscopy, and transmission electron microscopy. In addition, the identity of the sequences (3,663-bp product) of the small subunit (SSU), internal transcribed spacer (ITS) region (ITS1, 5.8S, ITS2), and D1-D3 large subunit (LSU) rDNA were determined. This newly isolated, thin-walled dinoflagellate has a type E eyespot and a single elongated apical vesicle, and it is closely related to species belonging to the family Suessiaceae. A. granifera has 10-14 horizontal rows of amphiesmal vesicles, comparable to Biecheleria spp. and Biecheleriopsis adriatica, but greater in number than in other species of the family Suessiaceae. Unlike Biecheleria spp. and B. adriatica, A. granifera has grana-like thylakoids. Further, A. granifera lacks a nuclear fibrous connective, which is present in B. adriatica. B. adriatica and A. granifera also show a morphological difference in the shape of the margin of the cingulum. In A. granifera, the cingular margin formed a zigzag line, and in B. adriatica a straight line, especially on the dorsal side of the cell. The episome is conical with a round apex, whereas the hyposome is trapezoidal. Cells growing photosynthetically are $10.0-15.0{\mu}m$ long and $8.5-12.4{\mu}m$ wide. The cingulum is descending, the two ends displaced about its own width. Cells of A. granifera contain 5-8 peripheral chloroplasts, stalked pyrenoids, and a pusule system, but lack nuclear envelope chambers, a nuclear fibrous connective, lamellar body, rhizocysts, and a peduncle. The main accessory pigment is peridinin. The SSU, ITS regions, and D1-D3 LSU rDNA sequences differ by 1.2-7.4%, >8.8%, and >2.5%, respectively, from those of the other known genera in the order Suessiales. Moreover, the SSU rDNA sequence differed by 1-2% from that of the three most closely related species, Polarella glacialis, Pelagodinium bei, and Protodinium simplex. In addition, the ITS1-5.8S-ITS2 rDNA sequence differed by 16-19% from that of the three most closely related species, Gymnodinium corii, Pr. simplex, and Pel. bei, and the LSU rDNA sequence differed by 3-4% from that of the three most closely related species, Protodinium sp. CCMP419, B. adriatica, and Gymnodinium sp. CCMP425. A. granifera had a 51-base pair fragment in domain D2 of the large subunit of ribosomal DNA, which is absent in the genus Biecheleria. In the phylogenetic tree based on the SSU and LSU sequences, A. granifera is located in the large clade of the family Suessiaceae, but it forms an independent clade.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.347-354
• /
• 1999

Generally, transceiver is operated to the remote control for the purpose of breading the traffic zone which is established on a mountain peak, island and building top using private line. Therefor, the remote control system of public radio station have been the very important role that is decision the quality relate to the quickness, accuracy, safety of communication on old type transceiver of SSB, VHF etc. In the case of using the only 1 private line which is exchanged voice signal with data signal had mixed or interrupted for up/down of channel, PTT control and monitoring of transmission channel and power. The up/down of channel and PTT control is according to the ASK and the data of monitoring is transfered to the FSK modulation, additional algorithm is studied on the serial protocol and traffic sequence using the MCS-51 processor in the simplex communication methode.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.26-32
• /
• 2007

A simple but accurate equivalent circuit of an aperture-coupled cavity-fed microstrip patch antenna is developed. It consists of ideal transformers, admittance elements, and transmission lines, and the related circuit element values are computed by applying the reciprocity theorem and complex power concept with the spectral-domain immittance approach. After validating by the published design example, a dual-band antenna was designed with the help of a hybrid optimization method. For this purpose, the Genetic Algorithm is applied with the Nelder-Mead simplex method. The obtained good results show that this approach turned out to be a very efficient tool for the design of aperture-coupled cavity-fed microstrip patch antenna having various structural design parameters.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.12
• /
• pp.51-57
• /
• 2019

In this paper, we analyzed the performance of IoT based smart wearable mine detection device. There are various mine detection methods currently used by the military. Still, in the general field, mine detection is performed by visual detection, probe detection, detector detection, and other detection methods. The detection method by the detector is using a GPR sensor on the detector, which is possible to detect metals, but it is difficult to identify non-metals. It is hard to distinguish whether the area where the detection was performed or not. Also, there is a problem that a lot of human resources and time are wasted, and if the user does not move the sensor at a constant speed or moves too fast, it is difficult to detect landmines accurately. Therefore, we studied the smart wearable mine detection device composed of human body antenna, main microprocessor, smart glasses, body-mounted LCD monitor, wireless data transmission, belt type power supply, black box camera, which is to improve the problem of the error of mine detection using unidirectional ultrasonic sensing signal. Based on the results of this study, we will conduct an experiment to confirm the possibility of detecting underground mines based on the Internet of Things (IoT). This paper consists of an introduction, experimental environment composition, simulation analysis, and conclusion. Introduction introduces the research contents such as mines, mine detectors, and research progress. It consists of large anti-personnel mine, M16A1 fragmented anti-mine, M15 and M19 antitank mines, plastic bottles similar to mines and aluminum cans. Simulation analysis is conducted by using MATLAB to analyze the mine detection device implementation performance, generating and transmitting IoT signals, and analyzing each received signal to verify the detection performance of landmines. Then we will measure the performance through the simulation of IoT-based mine detection algorithm so that we will prove the possibility of IoT-based detection landmine.