• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.547-552
• /
• 1998

The small-scale models have been utilized for the prediction of inelastic behavior of reinforced concrete structures for a long time. The parameters that affect the similitude between the model and the prototype are various. Among them, the effect of bond between the model reinforcement and the model concrete is one of the most important factors. The study reported herein is addressed to verifying this similitude in bond behavior. Another topic is the similitude in shear. The selected scales are 1/1, 1/5, 1/10 and 1/12. Two prototype specimens and three models were tested in addition to the associated material tests. The test results are compared from the viewpoint of similitude.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.47-57
• /
• 1999

The small-scale models have been utilized for the prediction of inelastic behavior of reinforced concrete structures for several decades. The parameters that affect the similitude between the model and prototype are various. Among them, the effect of bond between the model reinforcement and the model concrete is one of the most important factors. The study reported herein is addressed to verifying this similitude in bond behavior. The simple beams which have the lap splice at the midspan were made and flexural tests were performed under two-point loading. The length of lap splice are varied from 0.4ld through 0.7ld and up to 1.0ld where ld is the development length of the reinforcement. The selected scales are 1/1, 1/5, 1/10 and 1/12. Two prototype specimens and three models were tested in addition to the associated material tests and the test results are compared from the viewpoint of similitude.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.2
• /
• pp.31-42
• /
• 1991

남극건물의 기능을 현저히 저하시키는 큰요인의 하나인 극설현상에 관한 연구는 건물로 인한 남극환경에 미치는 인간의 영향을 최소화시키기 위한 기본적인 연구라고할 수 있다. 남극에 건설될 새로운 건물을 대상으로한 극설현상의 현지조사나 실물실험은 여러모로 보아 비경제적이고 비현실적이기 때문에 풍동실험의 필요성이 절실해진다. 본 연구는 극설현상의 풍동실험을 위해 필요한 similitude parameters 의 중요성및 각각의 상관성을 분석하였으며 고상식 및 지상식의 직사각형의 단독형 및 group형 건물들 주위에 쌓인 극설의 형태와 극설량을 풍동실험을 통해 조사분석햐여 남극건물의 극설현상에 대한 설계지침(design guideline)을 제시하였다.

• Journal of Biosystems Engineering
• /
• v.14 no.2
• /
• pp.67-79
• /
• 1989

This study was conducted to investigate the applicability of true model theory for pull prediction in a powered lugged wheel-soil system and to examine the possibility of using principles of similitude in investigating the dimensions of soil parameters pertinent to a powered lugged wheel-soil system concerning the pull prediction. The following conclusions were derived from the study; 1) The pull of prototype wheels proved to be predicted by those of the model wheels for the range of the dynamic weight tested. The pull curves of models and prototype were respectively very similar in the shape. From this basic knowledge, it was enabled to apply the similitude theory to the performance prediction of the true model. 2) A conditional equation which can be used for the prediction of pull of prototype by model test was derived as follows. $n_f=n_1^{-b}$ where $n_f$ : force scale = $w/w_m$ $n_1$ : length scale = ${\ell}/{\ell}_m$ b : exponent on the length dimension of the soil property ${\alpha}$ The range of the numerical value of b, which was determined by the least square method, was found to be -2.0~-2.6. 3) Considering a relatively wide variation of b values in the pull prediction, b is considered to be a function of many variales. Thus it was concluded that there are several soil properties which are pertinent to the powered lugged-wheel-soil system concerning the pull prediction, and these soil properties may have the different effects on the pull of model and protytype wheels, to give the different dimension on the soil parameters.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.2
• /
• pp.171-171
• /
• 1991

• Advances in Computational Design
• /
• v.8 no.2
• /
• pp.133-145
• /
• 2023

Scaling and similitude large scale structural member to small scale model is considered the most important matter for the experimental tests because of the difficulty in controlling, lack of capacities and expenses, furthermore that most of MSc and PhD students suffering from choosing the suitable specimen before starting their experimental study. The current study adopts to take large scale slab with opening as a case study of structural member where the slab is squared with central squared opening, the boundary condition is fixed from all sides, the load represents by four concentrated force in four corners of opening, as well as, the study adopts Buckingham theorem which has been used for scaling, all the parameters of the problem have been formed in dimensionless groups, the main groups have been connected by a relations, those relations are represented by force, maximum stress and maximum displacement. Finite element method by ANSYS R18.1 has been used for analyzing and forming relations for the large scale member. Prediction analysis has been computed for three small scale models by depending on the formed relations of the large scale member. It is found that Buckingham theorem is considered suitable way for creating relations among the parameters for any structural problem then making similitude and scaling the large scale members to small scale members. Finally, verification between the prediction and theoretical results has been done, it is observed that the maximum deviation between them is not more than 2.4%.

• Journal of Biosystems Engineering
• /
• v.14 no.3
• /
• pp.158-167
• /
• 1989

This study was conducted to investigate the applicability of true model theory in a powered lugged wheel-soil system and to examine the possibility of using principles of similitude in investigating the dimensions of soil parameters pertinent to a powered lugged wheel-soil system concerning the sinkage prediction. The following conclusions were derived from the study; 1) The sinkage of prototype wheels proved to be predicted by those of the model wheels for the range of the dynamic weight tested. 2) A conditional equation which can be used for the prediction of sinkage of prototype by model test was derived as $n_f=n{_\ell}{^{-b}}$. The range of the numerical value of b, which is the exponent on the length dimension of the soil property ${\alpha}$, was found to be -1.48~-2.54. 3) Considering a relatively wide variation of b values, it was concluded that there are several soil properties which are pertinent to the powered lugged-wheel soil system concerning the sinkage prediction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.188-192
• /
• 1997

A study was conducted to improve validity in new BOM structure through using the similitude of existing BOM in the PDM. The system is developed in Web-Based PDM environments using servlets and database. The system provides the correlation information between parts to inflect the reusability of existing BOM. User-defined correlation is used to inform the relations between design precedence and co-relations of parameters. Realistic application in injection mold production is constructed using this structure.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.6
• /
• pp.120-124
• /
• 2007

The purpose of this study was to investigate the stability of the arched and fan types of artificial reefs, which provide habitats for shellfish and seaweed. According to the Froude similitude, parameters affecting the stability of the artificial reefs were analytically, experimentally studied. First, the design parameters of the artificial reefs in wave and current fields were presented. Then, using dimensionless parameters, such as the surf similarity parameter and water particle speed, the stability of the arched and fan types of artificial reefs was investigated. From the hydraulic experiments, it is shown that the stability heavily depends on the way the artificial reefs are installed. Therefore, the installation of the artificial reefs on the surf zone should be carefully executed.

• Nuclear Engineering and Technology
• /
• v.12 no.4
• /
• pp.286-292
• /
• 1980

Similitude requirement for model testing of flow induced vibration of reactor internals are investigated. In depth discussions on the Reynolds number effects are made. For valid model tests of fuel assemblies vibrating in its fundamental natural frequency, reduced frequency (fD/U), and dam ping parameter( $m_{c}$$\delta$$_{c}$ $D_{\rho}$$^2$) are two most important parameters.ers.