• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.637-647
• /
• 2019

In this study, we analyzed seismic behavior of reinforced earth retaining wall through the model test in order to characterize the behavior of reinforced earth retaining wall during earthquake. A scale model test was performed based on similitude ratio in accordance with law of similitude due to time and financial constraints on real scale modeling experiments. Seismic resistance characteristics of each seismic waves were analyzed by assessing the variations measured through excitation of the excited acceleration of 0.05g, 0.1g, 0.15g, and 0.2g. The results of this study, it would be important to obtain reasonable and abundant data on ground properties and seismic design in preparation for earthquakes when assessing the safety of block type reinforced earth retaining wall confined to model experiment. Acquisition of those data and systematic analytical techniques are considered likely to have a significant effect on the decrease of structure damage caused by earthquakes in Korea which has recently witnessed frequent occurrence of earthquakes.

• 대한조선학회논문집
• /
• 제59권6호
• /
• pp.355-361
• /
• 2022

In order to produce model ice sheets having targeted physical properties in accordance with the law of similitude, the ice model basin of Korea Research Institute of Ships and Ocean Engineering carries out a series of processes such as cooling, seeding, freezing, and tempering. Performance in ice field of ice going ships or marine structures is evaluated from model tests in ice conditions made out of a model ice sheet such as level ice, pack ice, brash ice, and ice rubble field, etc. In this study, we investigated effects of micro-bubble layers and seeding of ice nuclei included in the process generating a model ice sheet on change in physical properties of thickness, density, and flexural strength.

• Advances in Computational Design
• /
• 제8권2호
• /
• pp.133-145
• /
• 2023

Scaling and similitude large scale structural member to small scale model is considered the most important matter for the experimental tests because of the difficulty in controlling, lack of capacities and expenses, furthermore that most of MSc and PhD students suffering from choosing the suitable specimen before starting their experimental study. The current study adopts to take large scale slab with opening as a case study of structural member where the slab is squared with central squared opening, the boundary condition is fixed from all sides, the load represents by four concentrated force in four corners of opening, as well as, the study adopts Buckingham theorem which has been used for scaling, all the parameters of the problem have been formed in dimensionless groups, the main groups have been connected by a relations, those relations are represented by force, maximum stress and maximum displacement. Finite element method by ANSYS R18.1 has been used for analyzing and forming relations for the large scale member. Prediction analysis has been computed for three small scale models by depending on the formed relations of the large scale member. It is found that Buckingham theorem is considered suitable way for creating relations among the parameters for any structural problem then making similitude and scaling the large scale members to small scale members. Finally, verification between the prediction and theoretical results has been done, it is observed that the maximum deviation between them is not more than 2.4%.

• 한국수자원학회논문집
• /
• 제31권4호
• /
• pp.459-467
• /
• 1998

유사매질개념에 의하여 비균질 다공성 매질을 설명할 수 있는 기존의 방법은 미시 밀러 상사(Mis), 거시 밀러 상사(MaS)와 웨릭 상사(WS)로 나눌 수 있고, 그들간의 관계는 MiS ⊂ MaS⊂ WS(⊂: subset)임을 알 수 있었다. 본 연구에서 제안한 방법은 WS에서 축적변수 $\alpha$=w 로 가정하고 함수량을 포화도 대신 유효포화도로 축적한 것이다. 이 방법은 검사해석의 관점에서 일반성이 결여되지 않고, 축적변수 $\alpha$만으로 비균질 매질을 설명할 수 있다. 즉 =1($\alpha$의 평균값)인 매질은 비균질 매질에 상응하는 등가매질을 의미하고, $\alpha$의 표준편차는 다공성 매질의 비균질 정도를 설명한다. $\alpha$>1인 매질의 특수계수는 등가매질의 투수계수보다 크며 또한 유효함수량은 $\alpha$>1인 매질에서 크게 나타난다. 이와같은 $\alpha$의 성질을 이용하여 가상적인 여직 1차원 비균질 다공성 매질을 난수 발생기법으로 생성하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.188-192
• /
• 1997

A study was conducted to improve validity in new BOM structure through using the similitude of existing BOM in the PDM. The system is developed in Web-Based PDM environments using servlets and database. The system provides the correlation information between parts to inflect the reusability of existing BOM. User-defined correlation is used to inform the relations between design precedence and co-relations of parameters. Realistic application in injection mold production is constructed using this structure.

• 한국지진공학회논문집
• /
• 제21권2호
• /
• pp.87-93
• /
• 2017

Many studies are conducted in several fields for fragility analysis of structures or elements which is a probabilistic seismic safety analysis in consideration with uncertainty of seismic loading. It is hard to directly conduct fragility analysis for an infrastructure with social importance due to its size. Therefore, a fragility analysis for an infrastructure mainly conducted in element level or conducted with scaled model built in accordance with similarity law. In this article, fragility analysis for prototype and scaled model of reinforced concrete column was conducted with numerical models which had been updated by the results of shaking table test and pseudo dynamic test. As a result, response stress from the numerical analysis result of prototype model was higher than that from scaled model due to different stiffness ratios between steel and concrete. However, the probability of failure for scaled model was higher than that for prototype model because failure criteria for scaled model was down due to similarity law. Also it was evaluated that probability of failure by using log normal standard deviation of response stresses by spectrum matched accelerograms was more reliable than probability of failure by using existing coefficient of variation normally used.

• 한국지반공학회논문집
• /
• 제21권3호
• /
• pp.65-77
• /
• 2005

본 연구에서는 계단식 보강토 옹벽에 대한 측소 모형실험 수행하고 그 결과를 토대로 계단식 보강토 옹벽의 파괴 메카니즘을 분석하였다. 보강토 옹벽의 모형설험은 5m 높이의 현장옹벽에 대해 상사법칙을 적용하여 축소$\cdot$모사하였으며 상사법칙 적용 결과에 따라 보강재를 선택하여 실험을 실시하였다. 또한, 파괴 메카니즘 분석을 위해 자중에 의한 파괴를 성공적으로 유도하였다. 실험결과를 토대로 보강토 옹벽의 상$\cdot$하단 옹벽의 이격거리와 보강재 길이가 파괴 양상에 미치는 영향을 분석하였으며 아울러 현재 적용되고 있는 설계기준의 타당성 검토하였다.

• Computers and Concrete
• /
• 제22권1호
• /
• pp.101-116
• /
• 2018

As one of the most important engineering structures, arch dams are huge constructions built with human hands and have strategical importance. Because of the fact that long construction duration, water supply, financial reasons, major loss of life and material since failure etc., the design of arch dams is very important problem and should be done by expert engineers to determine the structural behavior more accurately. Finite element analyses and non-destructive experimental measurements can be used to investigate the structural response, but there are some difficulties such as spending a long time while modelling, analysis and in-situ testing. Therefore, it is more useful to conduct the research on the laboratory conditions and to transform the obtained results into real constructions. Within the scope of this study, it is aimed to determine the structural behavior of arch dams considering experimentally validated prototype laboratory model using similitude and scaling laws. Type-1 arch dam, which is one of five arch dam types suggested at the "Arch Dams" Symposium in England in 1968 is selected as reference prototype model. The dam is built considering dam-reservoir-foundation interaction and ambient vibration tests are performed to validate the finite element results such as dynamic characteristics, displacements, principal stresses and strains. These results are considered as reference parameters and used to determine the real arch dam response with different scales factors such as 335, 400, 416.67 and 450. These values are selected by considering previously examined dam projects. Arch heights are calculated as 201 m, 240 m, 250 m and 270 m, respectively. The structural response is investigated between the model and prototype by using similarity requirements, field equations, scaling laws etc. To validate these results, finite element models are enlarged in the same scales and analyses are repeated to obtain the dynamic characteristics, displacements, principal stresses and strains. At the end of the study, it is seen that there is a good agreement between all results obtained by similarity requirements with scaling laws and enlarged finite element models.

• 콘크리트학회지
• /
• 제11권1호
• /
• pp.255-266
• /
• 1999

본 연구의 목적은 비내진 상세를 가진 고층 R.C골조의 탄성 및 비탄성 거동을 실험적으로 살펴보는 것이다. 따라서, 국내의 내진 설계규준에 따라 설계 및 시공된 건축물이 선정되었으며, 상사법칙에 따라 1:12의 축소율의 평면 골조모델이 제작되었다. 실험방법은 옥상층의 변위제어에 의해 반전횡하중 실험과 일방향 가력 실험을 수행하였다. 지진효과를 나타내기 위하여, 횡력은 휘플트리를 이용하여 각층에 역삼각형 형태로 분포되었다. 실험으로부터 밑면전단력, 균열양상, 주요부재 단부에서의 국부 회전각 및 층간변위와 층전단력과의 관계를 얻을 수 있었다. 실험결과로부터 비내진 상세를 가진 고층 철근콘크리트 골조의 탄성 및 비탄성 거동에 대해 살펴보았다.

• 콘크리트학회지
• /
• 제8권6호
• /
• pp.183-193
• /
• 1996

내진상세를 가진 2경간 2층 모멘트 저항 철근콘크리트 평면구조물을 설계하고 상사법칙에 근거하여 1/2.5 크기의 구조물과 1/10 축소모델을 제작하였다. 다음, 이 구조물에 변위 조절하에서 반복횡하중 실험을 실시하였다. 이들 실험결과에 근거하여 강도, 강성, 에너지 소산능력, 파괴모드, 국부변형등과 같은 구조적 거동 특성을 상사성의 관점에서 비교하였다. 이 결과를 근거로 하여 다음과 같은 결론을 얻었다. ; (1)1/10 축소모델에서의 강도는 1/2.5구조물의 강도와 매우 유사하였다. (2)1/10축소모델의 초기 강성은 대략 1/2.5구조물의 초기 강성의 2/3 정도로 나타났다. (3)1/10축소모델은 1/2.5 구조물 보다 더 작은 에너지 소산능력을 나타내었다. (4) 1/2.5구조물과 1/10축소모델의 비탄성 붕괴 메카니즘이 약간의 차이를 나타내고 있다.