• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1746-1754
• /
• 2016

In this paper, we provide a development and evaluation method for an archery posture analyzing system, using an inertial sensor. The system was developed using LabVIEW2014 by National Instruments and evaluated using the DTW algorithm. To convert the voltage value of the inertial sensor into a physical value, a coordinate transformation matrix bias was applied. To evaluate the similarity of movement in archery shooting, the DTW distance was calculated and similarity was confirmed based on simple mechanical movement, the same person's shooting movement, shooting movement with another person, and the noise signal. The average similarity comparison results were as follows: simple mechanical movement was 17.05%, the same person's shooting movement was 26.48%, shooting movement with another person was 62.8%, and the noise signal was 328.5%; a smaller value indicates a higher level of similarity. We confirmed the possibility of analyzing the archery posture using 3-axis acceleration of the inertial sensor. We inferred that the proposed method might be important means for assessing shooting skills, evaluation of archer's progress, and finding talented archers in advance.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.3
• /
• pp.245-253
• /
• 2003

Dissolution profile comparsions can be done by virtue of the similarity factor $(f_2)$. It is a logarithmic reciprocal square root transformation of the sum of squared error of % dissolution differences between two profiles at several time points. It gives information on the degree of similarity between the two profiles: An $f_2$ value between 50 and 100 suggests the similarity/equivalence of the two dissolution curves being compared. The objective of this report was to provide a careful examination on the $f_2$ metrics in detail. It was shown that $f_2$ values exceeded 50, when relative differences in % dissolved between two products were less than 15% at all time points. The similarity factor value was also found to be greater than 50, in cases when absolute % dissolution differences were below 10% at all time points. Interestingly, the $f_2$ value was changed by the number of the time points selected for calculation. In particular, $f_2$ tended to have higher values, when the $f_2$ metrics used a large number of time points in which % dissolved reached plateau. Finally, since the similarity factor was a sample statistics, it was impossible to infer type I/II errors and sampling error. Despite certain limitations inherited in the $f_2$ metrics, it was easy and convenient to evaluate how similar the two dissolution profiles were.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.295-302
• /
• 2022

Sparse-view computed tomography (CT) imaging technique is able to reduce radiation dose, ensure the uniformity of image characteristics among projections and suppress noise. However, the reconstructed images obtained by the sparse-view CT imaging technique suffer from severe artifacts, resulting in the distortion of image quality and internal structures. In this study, we proposed a convolutional neural network (CNN) with wavelet transformation and residual learning for reducing artifacts in sparse-view CT image, and the performance of the trained model was quantitatively analyzed. The CNN consisted of wavelet transformation, convolutional and inverse wavelet transformation layers, and input and output images were configured as sparse-view CT images and residual images, respectively. For training the CNN, the loss function was calculated by using mean squared error (MSE), and the Adam function was used as an optimizer. Result images were obtained by subtracting the residual images, which were predicted by the trained model, from sparse-view CT images. The quantitative accuracy of the result images were measured in terms of peak signal-to-noise ratio (PSNR) and structural similarity (SSIM). The results showed that the trained model is able to improve the spatial resolution of the result images as well as reduce artifacts in sparse-view CT images effectively. Also, the trained model increased the PSNR and SSIM by 8.18% and 19.71% in comparison to the imaging model trained without wavelet transformation and residual learning, respectively. Therefore, the imaging model proposed in this study can restore the image quality of sparse-view CT image by reducing artifacts, improving spatial resolution and quantitative accuracy.

• Journal of KIISE:Databases
• /
• v.33 no.7
• /
• pp.727-740
• /
• 2006

Schema matching is important as a prerequisite to the transformation of XML documents. This paper presents a schema matching method for the transformation of XML documents. The proposed method consists of two steps: preliminary matching relationships between leaf nodes in the two XML schemas are computed based on proposed ontology and leaf node similarity, and final matchings are extracted based on a proposed path similarity. Particularly, for a sophisticated schema matching, the proposed ontology is incrementally updated by users' feedback. furthermore, since the ontology can describe various relationships between concepts, the proposed method can compute complex matchings as well as simple matchings. Experimental results with schemas used in various domains show that the proposed method is superior to previous works, resulting in a precision of 97% and a recall of 83 % on the average. Furthermore, the dynamic ontology increased by 9 percent overall.

• Journal of applied mathematics & informatics
• /
• v.29 no.3_4
• /
• pp.563-572
• /
• 2011

In this paper, the Lie symmetry analysis is performed on the three mixed second-order PDEs, which arise in fluid dynamics, nonlinear wave theory and plasma physics, etc. The symmetries and similarity reductions of the equations are obtained, and the exact solutions to the equations are investigated by the dynamical system and power series methods. Then, the exact solutions to the general types of PDEs are considered through a variable transformation. At last, the symmetry and integration method is employed for reducing the nonlinear ODEs.

• Journal of Microbiology
• /
• v.34 no.3
• /
• pp.248-254
• /
• 1996

$cdc103^+$ gene in Schizosaccharomyces pombe which is similar to the CDC3 gene in Saccharomyces cerevisiae was cloned and sequenced. Comparison of the predicted amino acid sequences of $cdc103^+$ and CDC3 revealed that they share significant similarity (43% identity and 56% identity or similarity) to each other. The gene product of CDC3 in S. cerevisiae is known to be a highly ordered ring of filaments that lies just inside the cytoplasmic membrane in the region of the mother-bud neck. In order to characterize the gene product of $cdc103^+$ in Schizosaccharomyces pombe, fusion proteins were used to generate the polyclonal antibodies specific for the gene product (cdc103p). In immunofluorescence experiments, these antibodies decorate the region of the septum formation as a double ring structure late in the cell division cycle.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1346-1353
• /
• 2007

In this paper, the methods are presented for the calculation of general coupling coefficient matrixes used in the band pass filter design. They are calculated from transmission coefficient($S_{21}$) and reflection coefficient($S_{11}$) with desired characteristics derived from the poles of filter function and return loss(RL). The calculated matrixes from this method are transformed to the folded canonical filter structure using similarity transformation which lends us the practical filter design. Based on the resulting matrix, the folded canonical filter has been designed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.3
• /
• pp.407-414
• /
• 1996

In this paper we consider the variable structure control for a class of discrete-time uncertain multivariable systems where the nominal system is linear. Discrete-time switching dynamics are introduced so that a new type of state trajectories called sliding mode may exist on the sliding surface by state feedback. The quantitative analysis for the matched uncertainties will show that every response of the system with the proposed switching dynamics is bounded within small neighborhoods of the state-space origin. Also, by the similarity transformation it will be shown that the eigenvalues of the closed-loop systems are composed of those of the subsystems which govern the range-space dynamics and null-space dynamics. It will be also shown that ideal sliding mode can be obtained in the absence of uncertainties due to one-step attraction to the sliding surface regardless of initial position of states. (author). 12 refs., 2 figs.

• Journal of the Optical Society of Korea
• /
• v.13 no.1
• /
• pp.131-138
• /
• 2009

The similarity between two groups of displaying methods is demonstrated in two ways, analytically and experimentally. A variety of layouts of the integral photography and display devices based on the point light source model is classified and analyzed in terms of projections and common/separate image planes. In particularly, the transformation matrix is found. Simulation experiments based on the image processing were performed. The layouts, analytical formulas, and experimental results show the similarity of both groups for several layouts.

• International Journal of Contents
• /
• v.9 no.2
• /
• pp.1-7
• /
• 2013

This paper proposes an efficient matching algorithm based on ASIFT (Affine Scale-Invariant Feature Transform) which is fully invariant to affine transformation. In our approach, we proposed a method of reducing similar measure matching cost and the number of outliers. First, we combined the Manhattan and Chessboard metrics replacing the Euclidean metric by a linear combination for measuring the similarity of keypoints. These two metrics are simple but really efficient. Using our method the computation time for matching step was saved and also the number of correct matches was increased. By applying an Optimized Random Sampling Algorithm (ORSA), we can remove most of the outlier matches to make the result meaningful. This method was experimented on various combinations of affine transform. The experimental result shows that our method is superior to SIFT and ASIFT.