• Animal cells and systems
• /
• v.6 no.3
• /
• pp.221-225
• /
• 2002

This study was conducted to find out how young black-tailed gulls (Larus crassirostris) recognize adult voice signals after hatching. For the experiment, adult voice recorded in the natural environment was played back at controlled intervals and intensity (dB) to 15 young gulls that were artificially hatched in the laboratory. The chirirah call frequency of young gulls increased as the intensity of the mew call increased. The chirirah response of the control group was highest to the mew call at intervals of 1.8s. The adult long ca11 and alarm call also showed similar results to the mew call when the interval and intensity were manipulated similar to the mew call. Based on the results of this experiment, it is assumed that the young black-tailed gulls recognize adult voice signals based on the simple structure of adult voice signals, that is, the interval and intensity of the voice.

• Speech Sciences
• /
• v.8 no.3
• /
• pp.43-50
• /
• 2001

This paper deals with voice similarities between sisters who are supposed to have common physiological characteristics from a single biological mother. Nine pairs of sisters who are believed to have similar voices participated in this experiment. The speech samples obtained from one pair of sisters were eliminated in the analysis because their perceptual score was relatively low. The words were measured in both isolation and context, and the subjects were asked to read the text five times with about three seconds of interval between readings. Recordings were made at natural speed in a quiet room. The data were analyzed in pitch and formant frequencies using CSL (Computerized Speech Lab) and PCQuirer. It was found that data of the initial vowels are much more similar and homogeneous than those of vowels in other positions. The acoustic data showed that voice similarities are strikingly high in both pitch and formant frequencies. It is assumed that statistical data obtained from this experiment can be used as a guideline for modelling speaker identification and speaker verification.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.806-813
• /
• 2013

This paper aims to compare the performance of three phase induction motor drives using Five Leg Inverter (FLI) and Three Leg Inverter (TLI) configurations. An Indirect Field Oriented Control (IFOC) method using a TLI is well established and incorporated for high performance speed drives in various industries. The FLI dual motor drive system on the other hand shows good workability in the independent control of two induction motor drives simultaneously. In this experiment, the IFOC method is utilized for both drive systems, and Space Vector Pulse Width Modulation (SVPWM) is used to generate pulses for both inverters. For the FLI, the Double Zero Sequence (DZS) Injection technique is used to generate the modulation signal. The complete experiment setup is done by using a DSpace 1103 controller board. The individual motor performances are analyzed using similar schemes, equipment setups and controller parameter values. The results show similar speed performance response capability between the single motor operation using a TLI system and the two motor operation using a FLI system based on the variable speed range either in forward or reverse operation. They also show similar load rejection abilities. However, the single motor with a TLI has a better power quality aspect such as ripple current and total harmonics distortion (THD).

• The Journal of Korean Physical Therapy
• /
• v.29 no.5
• /
• pp.234-240
• /
• 2017

Purpose: The aim of this study was to determine the effectiveness of breathing exercises and lumbar segmental exercises on the segmental stability of patients with chronic back pain. Methods: Fifty-nine patients, who suffered from chronic low back pain, were enrolled in this examination. They were divided randomly into three groups: experiment group 1 underwent breathing and segmental stabilization exercises (n=20), experiment group 2 experienced segmental stabilization exercises (n=20), and the control group was given the modality treatment (n=19). The measurements were assessed through an Oswestry disability questionnaire (ODQ), as well as a lumbar segmental instability test (LSIT). Results: The ODQ results for experimental groups 1 and 2 were similar (p<0.05), both before and after six weeks of exercise, but different among the three groups (p>0.05). The differences in segmental instability of each of the three groups were similar (p<0.05), and also similar among the three groups (p<0.05). Conclusion: These findings suggest that lumbar segmental stabilization exercises are efficient in increasing the segmental stability and alleviating pain in patients with chronic back pain. Additional studies on this subject will be needed to improve the clinical applications in the future.

• Journal of Korean Library and Information Science Society
• /
• v.40 no.3
• /
• pp.367-387
• /
• 2009

The similar bibliographic retrieval system follows whether it selects a thing of the extracted index term and or not the difference in which the similar document retrieval system There be many in the search result is generated. In this research, the method minimally making the error of the selection of the extracted candidate index term is provided In this research, the word information in which it is adjacent by using candidate index terms extracted from the similar literature and the keyword topic information were used. And by using the related author information and the reranking method of the search result, the similar bibliographic system in which an accuracy is high was developed. In this paper, we conducted experiments for similar bibliographic retrieval system on a collection of Korean journal articles of science and technology arena. The performance of similar bibliographic retrieval system was proved through an experiment and user evaluation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.592-597
• /
• 2002

The purpose of this study was to analyze the characteristics of a new heavy weight impactor, the Rubber Ball. Until now Bang-machine has been used to measure the heavy impact noise in accordance with JIS A 1418-1. However, various kinds of examination methods have been needed to make an objective observation of insulation capacity for floor impact noises. Two types of experiments were undertaken. First, the experiment about noise was carried out about an apartment building in actual living condition. Then. vibration noises from the impactors were analyzed. The results of this study were as follows : the result of experiment carried out with bonded area of bail was closer to practical experiment than that of non bonded area. In addition, the result about bonded area of ball was more similar to the result which is claimed by H. Tachibana than that about non bonded area. Moreover, it was found that Rubber Ball has more similar vibration characteristics to the real impact noise source than Bang-machine.

• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.491-502
• /
• 2022

A model experiment with a scale of 1:150 has been conducted to investigate the dynamic responses of a freestanding four-column bridge tower subjected to regular wave, random wave and coupled wave-current actions. The base shear forces of the caisson foundation and the dynamic behaviors of the superstructure were measured and analyzed. The comparisons of the test values with the theoretical values shows that wave-induced base shear forces on the bridge caisson foundation can be approximated by using a wave force calculation method in which the structure is assumed to be fixed and rigid. Although the mean square errors of the base shear forces excited by joint random wave and current actions are approximately equal to those excited by pure random waves, the existence of a forward current increases the forward base shear forces and decreases the backward base shear forces. The tower top displacements excited by wave-currents are similar to those excited by waves, suggesting that a current does not significantly affect the dynamic responses of the superstructure of the bridge tower. The experiment results can be used as a reference for similar engineering design.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.269-272
• /
• 2002

This study was carried out to investigate varietal differences on growth characteristics under the conditions of PE film-mulching and non-mulching in sesame. At maturing stage from 76 to 95 days after sowing, Yangbaeckkae, non-branching plant type, under non-mulching showed larger leaf area index (LAI) than that of film-mulching, while plant height and the number of capsules per plant were similar to those of film-mulching. LAI of Ahnsankkae, branching plant type, under non-mulching was similar to film-mulching, while plant height and the number of capsules per plant were smaller than those of film-mulching. Net assimilation rate (NAR) of two varieties under non-mulching was lower at seedling stage from 25 to 35 days after sowing but higher at flowering stage from 45 to 55 days after sowing. At maturing stage from 66 to 77 days after sowing, NAR and crop growth rate (CGR) of Yangbaeckkae under non-mulching were greater than those of film-mulching, whereas those of Ahnsankkae under non-mulching were lesser than those of film-mulching. Yield under non-mulching was decreased by 7 % in Yangbaeckkae and 33 % in Ahnsankkae compared with that of film-mulching, therefore Yangbaeckkae was more adaptable for non-mulching than Ahnsankkae. Main factors decreasing yield of Yangbaeckkae under non-mulching were small LAI, NAR, and CGR at the stage of young seedling, and small number of capsules at early maturing stage from first flowering to 20 days after first flowering.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.2
• /
• pp.193-200
• /
• 2014

Objectives: To develop domestic charcoal tubes with good adsorption capacity, breakthrough experiments were performed on four types of activated charcoal. Materials: The adsorption capacity and the adsorption rate were determined using a modified Wheeler equation after the breakthrough experiment. For four types of charcoal (J, K, S and SKC Inc. 226-01), 100 mg were used in the breakthrough experiment. The test was done on benzene, toluene, n-hexane, and acetone in a dynamic chamber. Results: K charcoal had the greatest surface area and the highest micropore volume. J charcoal had a similar surface area and micropore volume to SKC charcoal. S charcoal had the lowest surface area and micropore volume. J charcoal had the highest adsorption capacity at 101, 252 and 609 ppm of benzene. The gap in benzene adsorption capacity among the types of charcoal was the least at 609 ppm and the greatest at 101 ppm. J charcoal showed the highest adsorption capacity at 54, 106, 228 and 508 ppm of toluene. J charcoal and SKC charcoal had a similar adsorption capacity for acetone. J charcoal had the highest adsorption capacity for n-hexane. In the experiment featuring 10% breakthrough volume, 10% breakthrough occurred at 18 liters at $2065.9mg/m^3$ for J charcoal and at 20 liters at $1771.2mg/m^3$ for K charcoal. It was difficult to judge adsorption capacity by surface area and micropore volume of charcoal. J charcoal, which was similar to SKC charcoal in surface area and micropore volume, showed good adsorption capacity at common workplace concentrations. Conclusions: The adsorption capacity of J and K charcoal was superior compared with SKC charcoal. J and K charcoal can be considered appropriate for use as sampling media based on this result.

• Design & Manufacturing
• /
• v.15 no.4
• /
• pp.24-31
• /
• 2021

In this study, an artificial neural network model was constructed to convert CAE analysis data into similar experimental data. In the analysis and experiment, the injection molding data for 50 conditions were acquired through the design of experiment and random selection method. The injection molding conditions and the weight, height, and diameter of the product derived from CAE results were used as the input parameters for learning of the convert model. Also the product qualities of experimental results were used as the output parameters for learning of the convert model. The accuracy of the convert model showed RMSE values of 0.06g, 0.03mm, and 0.03mm in weight, height, and diameter, respectively. As the next step, additional randomly selected conditions were created and CAE analysis was performed. Then, the additional CAE analysis data were converted to similar experimental data through the conversion model. An artificial neural network model was constructed to predict the quality of injection molded product by using converted similar experimental data and injection molding experiment data. The injection molding conditions were used as input parameters for learning of the predicted model and weight, height, and diameter of the product were used as output parameters for learning. As a result of evaluating the performance of the prediction model, the predicted weight, height, and diameter showed RMSE values of 0.11g, 0.03mm, and 0.05mm and in terms of quality criteria of the target product, all of them showed accurate results satisfying the criteria range.