• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.670-676
• /
• 2004

플라즈마 디스플레이(Plasma Display Panel)의 도전성 전극 성형에 필요한 잉크젯용 은 나노 졸을 합성하고자, 액상 환원법에 의해 고농도의 은 나노 졸의 입자크기 및 입도분포와 분산성을 제어하였다 이를 위하여 생성된 입자에 분산성을 부여하는 고분자 전해질의 착체형성 비율과 함께 은 나노 졸의 고농도화를 진행하였다. 합성된 졸은 XRD, 입도분포측정기, TEM을 사용하여 상분석 및 입자의 크기와 형상을 관찰하였다 그 결과 분산성이 우수하고, 약 10nm의 입자크기를 갖는 은 나노 졸인 것을 확인할 수 있었으며, 10-40wt% 범위의 고농도 은 나노 졸을 합성할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.483-488
• /
• 2012

We successfully decorated multi-wall carbon nanotubes (MWNTs) with silver by reacting Ag-NPs with thiolfunctionalized MWNT-SH. Ag alkylcarbamate complex was used as an Ag precursor. Uniform Ag-NPs (5-10 nm) were effectively prepared by microwaving within 60 s using 1-amino-4-methylpiperazine (AMP), which acts as a reaction medium, reducing agent, and stabilizer. The MWNTs were functionalized with 2-aminoethanethiol. Exploiting the chemical affinity between thiol and Ag-NPs, Ag-MWNT nanohybrids were obtained by spontaneous chemical adsorption of MWNT-SH to Ag through Ag-S bonds. The Ag-S-MWNTs were characterized by TGA, XRD, and TEM to confirm that Ag-NPs were uniformly decorated onto the MWNTs. The Ag-S-MWNTs were then employed as conducting filler in epoxy resin to fabricate electrically conducting polymer composites. The electrical properties of the composites were measured and compared with that containing MWNT-SH. The electrical conductivity of composites containing 0.4 wt % Ag-S-MWNT was four orders of magnitude higher than those containing same content of MWNT-SH, confirming Ag-S-MWNT as an effective conducting filler.

• Acta Via Serica
• /
• 제3권2호
• /
• pp.73-90
• /
• 2018

The Silk Road tied the globe together for the first time by producing an early globalization phenomenon. Some consider that the ancient Silk Road disintegrated around the $18^{th}$ century CE due to the fall of the Muslim empires and the kingdoms between Asia and Europe. However, the maritime trade among East Asia and the Spanish dominion on the American continent reactivated the ancient Silk Road on some levels, and maintained trade dynamics until the $19^{th}$ century. This was possible because of Mexican silver and trade spots. Notwithstanding its historical background, Mexico seems so far away from the new Silk Road, or the Belt and Road Initiative in the $21^{st}$ century. Thus, this paper analyzes Mexico's historic and current role concerning the Silk Road. First, I conceptualize and compare the ancient Silk Road and Belt and Road Initiative through the lens of complex interdependence theory. I propose that, unlike the ancient Silk Road, the Belt and Road Initiative is a case of an induced complex interdependence. Second, I study the Manila Galleons' dynamics in order to trace the ancient ties with the Silk Road. I emphasize Mexican silver's contribution to East Asian economies and the importance of Mexico's role in the East Asia-Spanish trade. Consequently, I analyze Mexico's position in the Belt and Road Initiative. Finally, I present some concluding remarks about Mexico's role in the Silk Road.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.581-583
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3658-3660
• /
• 2014

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.879-884
• /
• 2002

A series of novel 1,3-alternate calix[4]-mono-thiacrown and -bis-thiacrowns were synhesized within good yields. The three dimensional 1,3-alternate conformation was confimed by X-ray crystal structure. From the results of two phase extraction and NMR studies on the ligand-metal complex, one can conclude that the calix[4]thiacrown ethers showed the very high selectivity for silver ion over other metal ions by an electrostatic interaction between sulfur atom and silver ion and by a $\pi-metal$ complexation.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2863-2864
• /
• 2013

• Bulletin of the Korean Chemical Society
• /
• 제22권2호
• /
• pp.219-227
• /
• 2001

The silver colloidal effects on the excited-state structure and intramolecular charge transfer (ICT) of p-N,N-dimethylaminobenzoic acid (DMABA) in aqueous cyclodextrin (CD) solutions have been investigated by UV-VIS absorption, steady-state and time-resolved fluorescence, and transient Raman spectroscopy. As the concentration of silver colloids increases, the ratio of the ICT emission to the normal emission (Ia /Ib) of DMABA in the aqueous $\alpha-CD$ solutions are greatly decreased while the Ia /Ib values in the aqueous B-CD solutions are significantly enhanced. It is also noteworthy that the ICT emission maxima are red-shifted by 15-40 nm upon addition of silver colloids, implying that DMABA encapsulated in $\alpha-CD$ or B-CD cavity is exposed to more polar environment. The transient resonance Raman spectra of DMABA in silver colloidal solutions demonstrate that DMABA in the excited-state is desorbed from silver colloidal surfaces as demonstrated by the disappearance of νs (CO2-)(1380 cm-1 ) with appearance of ν(C-OH)(1280 cm -1) band, respectively. Thus, in the aqueous B-CD solutions the carboxylic acid group of DMABA in the excited-state can be readily hydrogen-bonded with the secondary hydroxyl group of B-CD while in aqueous and $\alpha-CD$ solutions the carboxylic acid group of DMABA has the hydrogen-bonding interaction with water. Consequently, in the aqueous B-CD solutions the enhancement of the Ia /Ia value arises from the intermolecular hydrogen-bonding interaction between DMABA and the secondary hydroxyl group of B-CD as well as the lower polarity of the rim of the B-CD cavity compared to bulk water. This is also supported by the increase of the association constant for DMABA/ B-CD complex in the presence of silver colloids.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.126-136
• /
• 1995

Copper magnetron anode of a microsave-over consists of an cylindrical outer-tube and various inner-vanes. The magnetron anode is produced by the complex processes; vane blanking, pipe cutting and silver-alloy brazing of vanes. Recently, the backward extrusion process for forming vanes has been developed to avoid the complex procedures. The developed process is analyzed by using upper-bound elemental technique (UBET). In the UBET analysis, the upper-bound load, the configuration and the vane-height of final extruded product are determined by minimizing the roral power consumption with repect to chosen parameters. To verify theoretical analysis, experiments have been carried out with pure plasticine billets at room temperature, using different web-thickness and number of vanes. The theoretical predictions both for forming load and vane-height are in reasonable agreement with the experimental results.

• 자원환경지질
• /
• 제23권2호
• /
• pp.183-199
• /
• 1990

Ore deposits of Dongwon mine are composed of numerous gold and silver veins emplaced in sedimentary rocks of Cambrian Choseon Supergroup and granitoids of Cretaceous age. Ore veins of the mine can be divided into gold and silver veins on the base of vein structure, mineral assemblage and vein trends. Mutual relationships between gold and silver veins are uncertain. Gold veins are simple veins which are composed of base-metal sulfides, and electrum with quartz and ankerite. On the other hand, silver veins are complex veins which reveal three distinct stages of mineral deposition based on vein structure; stage I, deposition of small amounts of oxides and pyrite with quartz; stage II, deposition of base-metal sulfides, small amounts of Ag-bearing minerals, calcite and quartz; stage III, deposition of base metal sulfides, electrum, Ag-sulfosalts, native silver, carbonates and quartz. Homogenization temperature and salinity of fluid inclusion from quartz of gold vein are as follows; $229^{\circ}$ to $283^{\circ}C$, 4.7 to 6.4 wt.% equivalent NaCI. The ore mineralogy suggests that temperature(T) and sulfur fugacity($fs_2$) of the formation of the gold vein and stage III of silver vein are estimated as T ; $294^{\circ}$ to $318^{\circ}C$, $fs_2\;10^{-9.4}$ to $10^{-10.1}$ atm. and T; $240^{\circ}$ to $279^{\circ}C$, $fs_2;10^{-11.1}$ to $10^{-17.3}$ atm. respectively. Pressure condition during gold vein formation estimated from data of ore mineralogy and fluid inclusion range 500 to 750 bar.