• Fibers and Polymers
• /
• v.6 no.3
• /
• pp.269-276
• /
• 2005

In this study, cross-cultural comparison of sound sensation for Korean traditional silk fabrics between Korea and America was performed and prediction models for sound sensation by objective measurements including sound parameters such as level pressure of total sound (LPT), Zwicker's psychoacoustic characteristics, and mechanical properties by Kawabata Evaluation System were established for each nation to explore the objective parameters explaining sound sensation of the Korean traditional silk. As results, Koreans felt the silk fabric sounds soft and smooth while Americans were revealed as perceiving them hard and rough. Both Koreans and Americans were pleasant with sounds of Gongdan and Newttong and especially Newttong was preferred more by Americans in terms of sound sensation. In prediction models, some of subjective sensation were found as being related mainly with mechanical properties of traditional silk fabrics such as surface and compressional characteristics.

• Fibers and Polymers
• /
• v.2 no.2
• /
• pp.58-63
• /
• 2001

Silk fibroin (SF) was dissolved in calcium chloride/ethanol/water mixture(1/2/8 in mole ratio) at $70^{\circ}C$ for 4h. The dissolved silk fibroin was regenerated by casting the dialyzed solution into films. The films were treated with 50% aqueous solution of methanol for different times, and their antithrombogenicity was evaluated by in vivo tests. In vivo blood tests were made by a method of peripheral vein indwelling suture. It was found that the silk fibroin had a good antithrombogenicity and an absorbability even though the polymer showed foreign body reaction. Finally, the blood compatibilty of silk fibroin films which were subjected to structural change by the methoanl treatment, was examined in connection with their interfacial surface energy, and a correlation between these properties was found to be present.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.1-1
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1.The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of ζ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.289-297
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1 The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of $\xi$ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.109-115
• /
• 2009

The thermal stability and mechanical properties of Nephila clavata and Bassaniana decorata spider silks were measured and compared with those of aramid and polyester fibers. The thermal stability of the spider silk was lower than those of the commercial aramid and polyester fibers. However, the mechanical properties of the spider silk were far superior to that of the polyester fiber. The effect of the water content of the spider silk on its thermal stability and mechanical property was examined by conducting the silk to heat treatment at $100^{\circ}C$ under vacuum for various times. The results indicated that spider silk subjected to heat treatment for 1.5 hr had excellent thermal stability and mechanical property.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.1
• /
• pp.15-23
• /
• 1978

This studies have been carried out for several years to develop more better urea resin treating process on silk textiles which may be better crease resist without harming on the textile touch feeling. Specially, this paper payed attention to minimize the necessary formaldehyde content to be condensed with urea and created a new processing method which is named as Homo Metalic Urea Resin found to be better than urea resin process. The obtained results are as followings. 1. The prepared urea resin was found to be smell-less because of minimized formaldehyde content is the least than any other reports carried out before than this. 2. A new type of urea resin has been created by using uric 2incchloride and formaldehyde which is named as Homo Metalic Urea Resin. This processing method may carry both weighing process and urea resin process. 3. Crease resistance, stiffness and bulkiness were increased through such resin treats. Homo metalic urea resin process showed better results than the urea resin process. 4. Spun silk or low twisted silk have shown better crease resistance than raw silk or high twisted silk upon the both resin treats. 5. Both treat methods were found to be good economical feasibility upon the silk finishing process. 6. Tenacity and elongation of silk fibers were found to decrease some what because of grafting or weighing results. 7. Wooly silk has been also created with specific urea resin process. Such silk could be obtained by formaldehyde gas treat with urea soaken silk in a chamber, which induced to form scale on the surface of silk fibers.

• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.24-29
• /
• 1994

In order to investigate the crystallization in silk fibroin induced by acid treatment and its photo-yellowing reduction effect. silk fibroin were immersed in PH 3.5~4.0 sulfuric acid and 0.01N hydro-chloric acid at 2$0^{\circ}C$, and the changes of crystallinity were measured by infrared spectroscopy, X-ray diffraction. Yellowness index caused by UV irradiation were also observed. The results are as follows : 1. ${\beta}$-form transition occurs when the silk fibroin are immersed at 2$0^{\circ}C$ in pH 3.5~4.0 sulfuric acid and 0.01N hydro-chloric acid. Formation of new hydrogenbond in molecules on the amorphous region induced ${\beta}$-form structure, and increased crystallinity. 2. Crystallization owing to $\beta$-form transition reduced the initial yellowness index by ultraviolet irradiation.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.10-18
• /
• 1997

In order to study the properties of safflower yellow colors, thermodynamic parameters and dyeing properties on the silk in several dyeing conditions were investigated. The uv-visible spectra of safflower yellow colors in several solvents show hypsochromic shift with the polarity of solvent but bathochromic shift with increasing acidity of solution. The apparent diffusion coefficients and standard affinities of dyeing increased with the increase of dyeing temperature. The standard heat of dyeing(${\Delta}H^0$), entropy change(${\Delta}S^0$) and activation energy($E_{act}$) were calculated to be - 1.144kcal/mol, -7.498(5$0^{\circ}C$)~-3.804(9$0^{\circ}C$)cal/molㆍdeg and 0.123kcal/mol, respectively. The concentration of safflower yellow colors in the silk fiber increased with dyeing temperature, time, concentration of colors and acidity of initial dyebath. Silk fabrics were dyed bright yellow by pre-mordanting with tin chloride. Lightfastness of silk fabrics pre-mordanted by tin chloride was not excellent.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.44 no.2
• /
• pp.29-36
• /
• 2022

Over the past decades, silk sericin (SS) received increasing attention in the academic and industrial fields. In nature, SS acts as a glue that holds the two strands of silk fibrils together. However, recent works suggest that SS might have a more diverse role during the silk spinning process, such as stabilizing the SF in the silk gland. On the other hand, the sericulture industry has been trying to find novel applications for SS discarded from the silk fabric manufacturing process. Recovery and refining of SS would be the first step of the recycling of SS. Using a proper solvent SS could be shaped into various forms, such as spherical beads, microparticles, fibers, and films. Moreover, the applicability of these SS materials has been investigated in various fields such as cosmetics, templates for nanomaterials, drug delivery, heavy metal adsorption, and enzyme immobilization.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.40 no.1
• /
• pp.28-32
• /
• 2020

Recently, many studies have been undertaken on the wet spinning and electrospinning of silk because wet-spun fibers and electrospun webs of silk can be applied in the biomedical and cosmetic fields owing to the good biocompatibility of silk. The rheological properties of silk solution are important because they strongly affect the spinning performance of the silk solution and the structures of resultant fibrous materials. Therefore, as a preliminary study on the effect of solvent composition on the rheological properties of silk fibroin (SF) solution and structure of the resultant film, in the reported work, methanol was added to the SF formic acid solution. A small amount of methanol (i.e. 2%) added to the SF formic acid solution significantly altered the rheological properties of the solution: its shear viscosity increased by 10 folds at low shear and decreased on increasing the shear rate, demonstrating shear thinning behavior of the SF solution. Dynamic tests for the SF solution indicated that the addition of 2% methanol altered the viscous state of the SF formic acid solution to elastic. However, the molecular conformation (i.e. β-sheet conformation) of the regenerated SF film cast from formic acid remained unchanged on the addition of 2% methanol.