• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.710-718
• /
• 1995

The new forming method, Pressureless Powder Packing Forming Method was applied to the manufacturing of reaction sintered SiC. After the experiments of vibratory powder packing and binder infiltration, the abrasive SiC powder of which mean size is 45${\mu}{\textrm}{m}$ was selected to this forming method. Uniform green bodies with porosity of 45% and narrow pore size distribution could be formed by this new forming method. Also, complex or varied cross-sectional shapes could be easily manufactured through the silicone rubber mould used in this forming method. Maximum 15 wt% amorphous carbon was penetrated into green body by multi impregnation-carbonization cycles. And reaction-bonded SiC was manufactured by infiltration of SiC-carbon shaped bodies with liquid silicon.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.375-378
• /
• 2018

Conductive and dielectric SiC are fabricated using electroless plating of Ni-Fe films on SiC chopped fibers to obtain lightweight and high-strength microwave absorbers. The electroless plating of Ni-Fe films is achieved using a two-step process of surface sensitizing and metal plating. The complex permeability and permittivity are measured for the composite specimens with the metalized SiC chopped fibers dispersed in a silicone rubber matrix. The original non-coated SiC fibers exhibit considerable dielectric losses. The complex permeability spectrum does not change significantly with the Ni-Fe coating. Moreover, dielectric constant is sensitively increased with Ni-Fe coating, owing to the increase of the space charge polarization. The improvements in absorption capability (lower reflection loss and small matching thickness) are evident with Ni-Fe coating on SiC fibers. For the composite SiC fibers coated with Ni-Fe thin films, a -35 dB reflection loss is predicted at 7.6 GHz with a matching thickness of 4 mm.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.61-68
• /
• 2019

Only the power is converted from AC to DC, in accordance with IEC 60587 based test method, in order to develop the LSR(Liquid Silicone Rubber) insulator material for HVDC, the experiment of Inclined Plate Tracking and Erosion Resistance was conducted. A contaminant (2.5 mS/cm: ammonium chloride) was applied at a rate of 0.3 ml/min and a voltage of ${\pm}3.5kV$, and was evaluated on the basis of 60 mA/2s. The samples were prepared by dispersing LSR/Nano silica_25wt% Composites in LSR. The erosion phenomena of surface discharge and tracking due to DC polarity and negative polarity were measured by image, leakage current maximum and thermal camera. The thermal imaging camera measured the surface temperature generated by the joule heat of the leakage current due to the drying discharge and the conductive current. After the measurement, the tracking and erosion mechanisms were evaluated for erosion weight, erosion depth and erosion length. Positive and negative polarity of LSR/Nano Silica_25wt% composite Tracking and erosion results show that positive polarity is more severe than negative polarity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.152-154
• /
• 2001

Recently the extensive use of composite insulators for transmission lines can ultimately be justified only on long-term qualification tests. Especially, it is possible for the Polymer insulator to be aged in according to the environment in which it is used this may bring about the decrease of the duration of voltage application. So, this paper deals with aging property of the polymer insulator installed at real transmission line in the industry area. The contact angle, arc test, tracking test were measured for acquiring the degradation characteristics of silicone rubber and the SEM, XRF, FT-IR tests were measured for analyzing the crack and components. Also the surface leakage current of the polymer insulator was compared with that of the porcelain insulator. Finally, we knew that the aging property was not appeared during seven months at real transmission line in the industry area.

• 한국의상디자인학회지
• /
• 제1권1호
• /
• pp.5-16
• /
• 1999

The purpose of this study is to identify the distinctive characterics HYBRID, strictly defined, an offspring that is a cross between different species, genera, or, in rare cases, families, More loosely defined, a hybrid can also be a cross between parents of different subspecies or varieties of a species. Hybrid varieties of plants and animals are of economic value because the hybrid is nearly always more vigorous, larger, and more fertile than either of its parents. Plant and animal hybrids may arise spontaneously in nature or may be produced intentionally by man. Forward-looking fashion explores progress. Adjusting to a world that has integrated genetics and its mutations, the new silhouette seems without references, as if born from a spontaneous generation. A slightly bizarre composite, asymmetrical, discreetly technological aesthetic, it draws on the latest technological details. the pursuit of performance and ergonomics, yet also of comfort and amusement that takes into account the body and its articulations, generates strange garments. Inspired by medical protheses. Focos on fabric touches, their weightiness and surface effects obtained with silicone, rubber or wax. in a range that highlights yellows but can also contrast with colder, slightly surgical hues, the hybrid woman doesn't necessarily want to stand out.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.29-29
• /
• 2010

Engineering plastics have excellent electrical properties, mechanical strength and various characteristic which include chemical resistance, environmental resistance, weatherability at a wide temperature range. It has good characteristic(light weight, good productivity) as compare with epoxy or porcelain insulators. However, engineering plastics not suited to outdoor insulator because it isn't hydrophobic. Therefore, to over come these critical problems, we improve the surface insulation characteristics of engineering plastic by coating micro-, nano- size inorganic fillers added to RTV-SIR(Room temperature vulcanized-silicone rubber) at this plastic surface. The effect is analyzed through salt-fog test, tracking test. In conclusion, the engineering plastic coated RTV with micro-$Al_2O_3$20[phr], nano-Al(OH)3 1 ~ 3[phr] improved much better than the others.

• 한국자기학회지
• /
• 제18권4호
• /
• pp.136-141
• /
• 2008

Ru-Co가 복합 치환된 M-type Ba-ferrite($BaFe_{12-2x}Ru_xCo_xO_{19}$)의 치환량 x의 변화에 따른 자기적 특성과 전파흡수 특성에 관해 조사하였다. 기존의 Ti-Co를 치환시킨 경우보다 적은 양의 치환(x=0.3)으로 면내 자기이방성을 보이는 낮은 보자력($H_c$)과 높은 포화자화($M_s$) 값을 얻을 수 있었다. 따라서 Ru-Co 치환량 조절에 의해 GHz 대역에서 자연공명주파수의 조절이 가능하였다. 소결체 및 복합체에서 흡수 주파수 대역은 보자력이 증가할수록 고주파 대역으로 이동한다. 복합체에서 페라이트 혼합량이 증가함에 따라 복소투자율과 복소유전율의 값이 증가하기 때문에 정합주파수는 저주파 대역으로 이동한다. 이러한 특성들을 이용하여 순수한 M-형 육방정 페라이트에 Ru-Co의 치환량, 복합체에서 페라이트 분말의 혼합량, 그리고 흡수체의 두께의 제어를 통하여 GHz 주파수 대역에서 양호한 전자파 흡수체, 노이즈 감쇠재의 제조가 가능함을 제시할 수 있다.