• 한국화재소방학회논문지
• /
• 제26권4호
• /
• pp.70-76
• /
• 2012

본 논문에서는 디젤 승용차량에서 매연저감장치 손상에 기인한 차량화재에 대하여 기술하였다. 디젤 차량에서는 배출가스에 포함되는 입자상 물질을 저감하기 위하여 매연저감장치를 배기계통에 설치하고 있다. 매연저감장치는 입자상 물질의 과다 포집, 재상과정에서의 오류 및 흡기계통 불량 등에 의해 재생과정에서 파손에 이르게 되며, 매연저감장치가 파손되는 경우, 고온의 배출가스가 분출되고, 차량 하부 배기계통의 주변 가연물을 통해 화재로 진전된다. 매연저감장치 손상에 의해 화재가 발생되는 경우, 배기계통 배관 및 머플러 부분에 규산염계 무기화합물이 부착되는 특징을 나타내며, 이 규산염계 무기화합물은 매연저감장치 내부 필터 재료인 세라믹 부분이 손상되는 과정에서 발생된다. 따라서 화재가 발생된 디젤 차량의 경우, 머플러 주변에서 규산염계 무기화합물이 식별되는 경우, 매연저감장치 손상에 기인한 화재로 추정할 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.259-262
• /
• 2012

Recently, as the national policy of green growth is promoted, construction field also makes an effort to reduce CO₂ gas released when producing cement continuously. In other words, as the method solving environmental pollution and resources exhaustion, lots of mineral material compounds such as blast furnace slag powder which is industrial by-product, fly ash, red mud, etc. are examined to bo used as the substitute good of cement Therefore this study is to investigate the hardening characteristics of alumino-silicate inorganic binder using red-mud used as a accelerator of industrial by-product such as fly ash and blast furnace slag powder according to curing temperature. As a result, it is effective to use red-mud as the accelerator of inorganic binder with other additory accelerators.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2007년도 제25회 학술대회발표 논문집
• /
• pp.67-68
• /
• 2007

Tetraethyl orthosilicate (TEOS)로 형성된 gel의 film 형성 특성을 증가시키기 위하여 (3-glycidyloxypropyl)trimethoxysilane (GPTMS)와 1,2-bis(triethoxysilyl)ethane (BTEOS)를 추가한 유기-무기 복합 용액을 제조하였다. 화강암과 사암에 적용한 후, 접촉 각 및 고형화 시간, silicate의 함유량, 수분 흡수율 및 석재에 적용되었을 때의 공극률 변화를 측정하여 silicate를 기본으로 하는 복합제의 특성을 분석하였다.

• 한국세라믹학회지
• /
• 제42권4호
• /
• pp.224-231
• /
• 2005

The polymerization of $\varepsilon-caprolactone$ in the layers of the [DEACOOH]-Montmorillonite intercalations complex was attempted using 10-Carboxy-n-decyldimethylethylammonium bromide and Na-Montmorillonite to achieve [DEACOOH]-Polycaprolactone-Montmorillonite in which the inorganic material (montmorillonite) and the organic material (polycaprolactone) are chemically linked each other. The results of X-ray- and IR-analysis for the samples obtained after polymerization showed that the polymerization reaction has been successfully accomplished. In order to study the polymeric reaction products more precisely we have separated the polymerized product from the silicate layers and analyzed it with X-ray diffractometer, IR-spectrometer and TEM. The comparison of the results of X-ray- and IR-analysis for the separated polymer with them for the polymer which was synthesized by the reaction of $\varepsilon-caprolactone$ only with the organic cation without montmorillonite showed that the obtained both polymers are the same compounds.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.207-212
• /
• 2006

[ ${\varepsilon}-caprolactam$ ] was polymerized in the layers of the [DEACOOH]-Montmorillonite intercalations complex at high temperatures ranging from 250% to 260% formed from Na-Montmorillonite and 10-Carboxy-n-decyldimethylethylammonium bromide to achieve [DEACOOH]-Polycaprolactam-Montmorillonite, in which an inorganic polymer (montmorillonite) is chemically combined with an organic polymer (polycaprolactam). The results of X-ray and IR analyses for the samples obtained after polymerization showed that the polymerization reaction was successfully accomplished. For the purpose of studying the polymeric reaction product more precisely, the polymerized product was separated from the silicate layers and analyzed with an X-ray diffractometer and an IR-spectrometer. A comparison of the results of the X-ray and IR analyses of the separated polymer and the polymer that was synthesized by the reaction of ${\varepsilon}-caprolactam$ solely with the organic cation without montmorillonite showed that the obtained both polymers are identical compounds.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.223-231
• /
• 2010

The serious issue of tall building is to ensure the fire-resistance of high strength concrete. The fire resistant finishing method is necessarily essential in order to satisfy the fire resistance time of 3 h required by the law. The fire resistant finishing method is installed by applying a fire resistant material as a method of shotcrete or a fire resistant board to high strength concrete surface. This method can reduce the temperature increase of the reinforcement embedded in high strength concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of inorganic alumino-silicate compounds including the inorganic admixture such as fly ash and meta-kaolin as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. The study results show that the fire resistant finishing material composed of fly ash and meta-kaolin has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Inorganic compounds composed of fly ash and meta-kaolin is evaluated to be very effective as the fire resistance material for finishing to protect the concrete substrate by the reason of those simplicity in both application and manufacture. The additional study about the adhesion in the interface with concrete substrate is necessary for the purpose of the practical application.

• 한국토양비료학회지
• /
• 제31권4호
• /
• pp.330-333
• /
• 1998

본 시험은 석회 및 규산의 시용이 콩의 수량 및 종실에 미치는 영향을 조사하기 위하여 수행하였다. 콩의 수량은 NPK+석회 $1.5Mg\;ha^{-1}$ 처리가 가장 높았다. 탄수화물 함량은 무비에서 가장 높았고 단백질 함량은 NPK+석회 $1.5Mg\;ha^{-1}$ 및 NPK+규산 $1.5Mg\;ha^{-1}$ 처리구에서 높았으며 지방 및 회분함량은 NPK+규산 $1.5Mg\;ha^{-1}$ 처리구에서 높았다. 무기성분 함량은 처리간에 차이가 없었다. $P_2O_5$/T-N과 탄수화물 사이에는 $-0.99^{**}$, $P_2O_5$/T-N과 지방 사이에는 $-0.94^{**}$의 상관이 있었다. 그리고 Mn과 탄수화물사이에는 $0.95^*$의 상관이 있었다. 석회의 시용은 콩의 수량에, 규산의 시용은 단백질 함량증가에 효과적이었다.

• 콘크리트학회논문집
• /
• 제19권5호
• /
• pp.639-646
• /
• 2007

본 연구에서는 환경에 유해한 휘발성 유기화합물 (VOC)을 사용하지 않은 나노합성 세라믹 도장재를 도포한 콘크리트의 내구성 증진 효과를 평가하기 위하여 건조상태 부착강도 실험, 습윤상태 부착강도 실험, SEM 촬영, MIP 분석, 탄산화 촉진 실험, 전기적 촉진법에 의한 염소이온 확산실험, 동결융해에 대한 저항성, 내알칼리 실험 및 내염수성 실험을 실시하여 기존의 표면처리제와 비교 평가하였다. 부착강도 측정 결과 나노합성 세라믹 도장재가 건조상태 및 습윤상태에서 가장 이상적인 결과를 나타내었는데 이는 가수분해와 중축합반응을 통하여 무기질계 세라믹 구조를 형성한 나노합성 세라믹이 콘크리트 내의 C-A-S (calcium silicate aluminate)나 C-S-H (calcium silicate hydrate)와 같은 수화물과의 수소결합을 통해 콘크리트 표면과 일체화되어 나타난 결과로 판단된다. 또한 SEM 및 MIP 분석의 결과를 통해 미세한 공극을 가진 표면 조직을 보여주었다. 그리고 탄산화 및 염소이온 확산 실험과 동결융해 저항성에서 기존의 유기도장재를 능가하는 결과를 보였으며 내알칼리성 및 내염수성 실험에서도 좋은 성능을 나타내었다. 이상의 결과를 통해 기존의 휘발성 유기화합물을 사용하는 유기도장재의 대안으로써 해안 구조물, 하수 처리장 등 콘크리트 구조물의 내구성 향상을 위한 나노합성 세라믹 도장재의 사용이 기대된다.

• Advances in nano research
• /
• 제4권3호
• /
• pp.181-195
• /
• 2016

Addition of nano-$SiO_2$ (NS) to geopolymer composites has been studied through measurement of compressive strengths, FTIR and XRD analysis. Alumino-silicate materials are coarse aggregate included waste concrete and demolished walls with its cementing binder, cement kiln dust (CKD) used and can possess a pronouncing activation for the geopolymer reaction resulting from the high alkali contents within. Materials prepared at water/binder ratios in a range of 0.30: 0.40 under curing of $40^{\circ}C$ and 100% Relative Humidity (R.H.), while the used activator is sodium hydroxide in the ratio of 2 wt. %. First, CKD is added in the ratio from 10 up to 50 wt., %, and the demolished walls was varied depending on the used CKD content, while using constant ratio of waste concrete (40 wt., %). Second step, depending on the optimum CKD ratio resulted from the first one (40 wt. %), so the control geopolymer mix composed of cement kiln dust, demolished walls and waste concrete in the ratio (40:20:40, wt %). Nano-silica partially replaced waste concrete by 1 up to 8%. Results indicated that, compressive strengths of geopolymer mixes incorporating nano-silica were obviously higher than those control one, especially at early ages and specially with 3%NS.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.475-479
• /
• 1999

Langasite ($La_{3}Ga_{5}SiO_{14}$) was found to have wide application as a promising piezoelectric material. It has high thermal stability of the frequency and large electromechanical coupling factor. For the further development of new compounds with langasite type structure, powders in the La-Al-Si-O system were synthesized by a modified Pechini process. The evolution of the crystalline phase during calcination was studied using TG-DTA, XRD and TEM for the precursor powders. Decomposition proceeded via dehydration and removal of excess solvents at low temperatures ($T<500^{\circ}C$), followed by the crystallization of lanthanum aluminum silicate ($T>800^{\circ}C$) and phase transformation to $LaAlO_{3}$ phase ($T>1200^{\circ}C$). Transmission electron microscopy (TEM) of the calcined powders showed diffuse hollow rings corresponding to an amorphous phase at $800^{\circ}C$ and clear diffraction patterns corresponding to a crystalline phase from the P321 space group ($T<1200^{\circ}C$) and the R3m ($T<1200^{\circ}C$).