• 공업화학
• /
• 제28권3호
• /
• pp.326-331
• /
• 2017

캐스터오일은 수소화반응을 통해 계면활성제의 중간체 등 유용한 화학산업의 원료로 활용 가능하다. 본 연구에서는 캐스터오일의 수소화용 니켈촉매의 제조조건과 전처리 조건에 대한 영향을 연구하였다. 니켈촉매는 침전제와 pH를 다르게 하여 실리카 담체상에 침전법으로 담지되었고, 다시 산화와 환원의 반복된 전처리를 행하였다. 니켈촉매의 활성은 캐스터오일의 요오드 가를 측정하여 비교하였고, 니켈촉매의 분산도는 XRD, BET, TEM을 통하여 분석하였다. 니켈촉매의 활성을 CO산화반응실험을 통하여도 비교하였다. 산화와 환원 사이클의 반복에 의해 니켈의 재분산이 실리카 상에서 발생하였고, 이것이 캐스터오일 수소화반응 활성을 증진시키는데 기여하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.160-160
• /
• 2011

In the present work, $TiO_2$ fiilms supported by porous silica gel with high surface area synthesized by atomic layer deposition(ALD). Porous structure of silica substrate could be maintained even after deposit large amount of $TiO_2$ (500 cycles of ALD process), suggesting the differential growth mode of $TiO_2$ on top surface and inside the pore. All the $TiO_2$-covered silica samples showed improved MB adsorption abilities, comparing to bare one. In addition, when silica surface was covered with $TiO_2$ films, MB adsorption capacity was almost fully recovered by re-annealing process (500$^{\circ}C$, for 1 hr, in ambient pressure), whereas MB adsorption capacity of bare silica was decreased after re-heaing process. FT-IR study demonstrated that $TiO_2$ film could prevent deposition of surface-bound intermediate species during thermal decomposition of adsorbed MB molecules. Photocatalytic activity of $TiO_2$/silica sample was also investigated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.217-217
• /
• 2011

Recently, demand for thermally stable metal nanoparticles suitable for chemical reactions at high temperatures has increased to the point to require a solution to nanoparticle coalescence. Thermal stability of metal nanoparticles can be achieved by adopting core-shell models and encapsulating supported metal nanoparticles with mesoporous oxides [1,2]. However, to understand the role of metal-support interactions on catalytic activity and for surface analysis of complex structures, we developed a novel catalyst design by coating an ultra-thin layer of titania on Pt supported silica ($SiO_2/Pt@TiO_2$). This structure provides higher metal dispersion (~52% Pt/silica), high thermal stability (~600$^{\circ}C$) and maximization of the interaction between Pt and titania. The high thermal stability of $SiO_2/Pt@TiO_2$ enabled the investigation of CO oxidation studies at high temperatures, including ignition behavior, which is otherwise not possible on bare Pt nanoparticles due to sintering [3]. It was found that this hybrid catalyst exhibited a lower activation energy for CO oxidation because of the metal-support interaction. The concept of an ultra-thin active metal oxide coating on supported nanoparticles opens-up new avenues for synthesis of various hybrid nanocatalysts with combinations of different metals and oxides to investigate important model reactions at high-temperatures and in industrial reactions.

• Bulletin of the Korean Chemical Society
• /
• 제18권10호
• /
• pp.1082-1085
• /
• 1997

The Near-Edge X-ray Absorption Fine Structure (NEXAFS) technique and Differential Scanning Calorimetry (DSC) were utilized to investigate the reaction of CH4 and O2 on the MoO3/SiO2 catalyst. The NEXAFS results showed that the stoichiometry of the molybdenum oxide catalyst supported on silica was MoO3. MoO3 was reduced to MoO2 when the catalyst was exposed to CH4 at 773 K. NEXAFS results confirm that lattice oxygen is directly related to the process of CH4 oxidation which takes place on the surface of MoO3/SiO2 catalysts. DSC results show that the structure of MoO3 changes around 573 K and this structural change seems to improve the migration of oxygen in the lattice.

• 한국환경과학회지
• /
• 제26권1호
• /
• pp.67-78
• /
• 2017

Combustion of ethanol (EtOH) at low temperatures has been studied using titania- and silica-supported platinum nanocrystallites with different sizes in a wide range of 1~25 nm, to see if EtOH can be used as a clean, alternative fuel, i.e., one that does not emit sulfur oxides, fine particulates and nitrogen oxides, and if the combustion flue gas can be used for directly heating the interior of greenhouses. The results of $H_2-N_2O$ titration on the supported Pt catalysts with no calcination indicate a metal dispersion of $0.97{\pm}0.1$, corresponding to ca. 1.2 nm, while the calcination of 0.65% $Pt/SiO_2$ at 600 and $900^{\circ}C$ gives the respective sizes of 13.7 and 24.6 nm when using X-ray diffraction technique, as expected. A comparison of EtOH combustion using $Pt/TiO_2$ and $Pt/SiO_2$ catalysts with the same metal content, dispersion and nanoparticle size discloses that the former is better at all temperatures up to $200^{\circ}C$, suggesting that some acid sites can play a role for the combustion. There is a noticeable difference in the combustion characteristics of EtOH at $80{\sim}200^{\circ}C$ between samples of 0.65% $Pt/SiO_2$ consisting of different metal particle sizes; the catalyst with larger platinum nanoparticles shows higher intrinsic activity. Besides the formation of $CO_2$, low-temperature combustion of EtOH can lead to many other pathways that generate undesired byproducts, such as formaldehyde, acetaldehyde, acetic acid, diethyl ether, and ethylene, depending strongly on the catalyst and reaction conditions. A 0.65% $Pt/SiO_2$ catalyst with a Pt crystallite size of 24.6 nm shows stable performances in EtOH combustion at $120^{\circ}C$ even for 12 h, regardless of the space velocity allowed.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.96-104
• /
• 2015

Fischer Tropsch reaction is one of the interesting topic for renewable and clean energy. Polymerization of carbon monoxide or carbon dioxide with hydrogen over metal supported catalyst can produce long chain hydrocarbons. Synthetic liquid hydrocarbons are promising alternative to fossil fuels. This research work has been focused on the synthesis of Fe based catalyst for Fischer Tropsch reaction. Mesoporous silica (MS) support prepared by a precipitation method using two different washing solution, distilled water (DW) and acid in ethanol solution (ET), and different calcination temperature. Then, Fe/MS was prepared by an incipient wetness impregnation method. All of samples were systematically characterized using various physical and chemical techniques. TEM and XRD analysis were used to ensure that the cubic Ia3d mesostructure is stable after calcination. FTIR spectra are useful to ascertain the existence of template in the support. TPR studies were also used to understand the nature of Fe species and their reducibility. The results reveal that washing the support with distilled water and calcination at $550^{\circ}C$ can efficiently remove the triblock copolymer templates. The existence of template in the support affects the textural properties of all catalyst investigated.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1719-1722
• /
• 2010

• 한국수소및신에너지학회논문집
• /
• 제23권1호
• /
• pp.1-7
• /
• 2012

This study was performed to develop a low Pt content catalyst as a catalyst for HI decomposition in S-I process. Bimetallic catalysts added various amounts of Pt on a silica supported Ni catalyst were prepared by impregnation method. HI decomposition was carried out using a fixed bed reactor. As a result, Ni-Pt bimetallic catalyst showed enhanced catalytic activity compared with each monometallic catalyst. Deactivation of Ni-Pt catalyst was not observed while deactivation of Ni monometallic catalyst was rapidly occurred in HI decomposition. The HI conversion of Ni-Pt bimetallic catalyst was increased similar to Pt catalyst with increase of the reaction temperature over a temperature range 573K to 773K. From the TG analysis, it was shown that $NiI_2$ remained on the Ni(5.0)-Pt(0.5)/$SiO_2$ catalyst after the HI decomposition reaction was decomposed below 700K. It seems that small amount of Pt in bimetallic catalyst increase the decomposition of $NiI_2$ generated after the decomposition of HI. Consequently, it was considered that the activity of Ni-Pt bimetallic catalyst was kept during the HI decomposition reaction.

• 공업화학
• /
• 제27권1호
• /
• pp.86-91
• /
• 2016

Ionic liquid 기능화 및 메탈로센 촉매 담지를 위해 세 종류의 무정형 실리카와 SBA-15를 담체로 사용하였다. Ionic liquid가 표면 기능화된 실리카는 1,3-bis(cyanomethyl)imidazolium chloride의 염소 음이온과 실리카 표면의 OH 그룹 사이의 상호작용에 의해 합성되었다. 에틸렌 중합을 위해 ionic liquid가 기능화된 실리카에 메탈로센과 조촉매 methylaluminoxane(MAO)을 담지하였다. SBA-15와 비교하여 큰 기공 크기를 갖는 ionic liquid가 표면 기능화된 XPO-2412와 XPO-2410에 담지된 촉매는 기능화되지 않은 실리카에 담지된 촉매보다 높은 활성을 보였다. 그러나 SBA-15에 담지된 촉매는 ionic liquid의 표면 기능화 후에 활성이 감소하였다. 이는 ionic liquid와 메탈로센 촉매, 조촉매 MAO가 담지되면 기공의 크기가 크게 줄어들기 때문에 중합 시 에틸렌 모노머와 조촉매가 기공 내 촉매 활성점으로 확산하는데 제한을 받기 때문이다. 또한 실리카 표면의 OH 그룹의 농도 변화에 따른 촉매의 중합 활성에 대한 영향을 연구하였다. 무정형 실리카의 OH 그룹의 농도가 증가할수록 중합 활성도 증가하였으며 실리카에 담지된 촉매의 중합 활성은 ionic liquid 표면처리 후에도 유사한 경향을 보였다.

• 폴리머
• /
• 제36권1호
• /
• pp.111-116
• /
• 2012

메조포러스 물질의 표면을 post-synthesis grafting method를 통해 표면을 기능화시킨 후 $(n-BuCp)_2ZrCl_2$/methylaluminoxane(MAO)를 담지하여 에틸렌 중합을 실시하였다. 아민기와 시안기를 가지는 유기실란 $N$-[(3-trimethoxysilyl)propyl]ethylenediamine(2NS), 4-(triethoxysilyl)butyronitrile(1NCy), 1-(3-triethoxysilylpropyl)-2-imidazoline(2NIm)는 메조포러스 물질의 표면 기능화에 사용되었다. SBA-15/2NS/$(n-BuCp)_2ZrCl_2$촉매 담지시 MAO의 양이 증가할수록 Zr 함량은 감소하였고 Al 함량은 증가하였다. 에틸렌 중합 활성은 MAO의 양이 증가할수록 급격히 증가함을 볼 수 있었다. 담지시간이 6시간일 때 가장 높은 활성을 보였다. 유기실란의 종류에 따른 활성 차이는 SBA-15/2NS/$(n-BuCp)_2ZrCl_2$ > SBA-15/2NIm/$(n-BuCp)_2ZrCl_2$ > SBA-15/1NCy/$(n-BuCp)_2ZrCl_2$ 순으로 감소하였다. 아민기를 두 개 갖는 2NS와 2NIm은 아민기를 하나 갖는 1NCy보다 $(n-BuCp)_2ZrCl_2$와 더 강하게 상호작용을 한다. 따라서 촉매 내 질소와 Zr함량이 증가할수록 활성은 증가하였다.