• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.3
• /
• pp.123-130
• /
• 2001

The purpose of this study is to suggest the non-destructive equation for the estimation of concrete strength by ultrasonic pulse velocity at the Age of 28day compressive strength of $600{\sim}1000kg/cm^2$. For this purpose, selected test variables were water-hinder ratio, replacement ratio of silica fume, binder content, maximum size of coarse aggregate and sand-aggregate ratio. From the results, the average increase or decrease of ultrasonic pulse velocity is 61m/sec for each 1% of moisture content. And the correlation equation between the ultrasonic pulse velocity and the compressive strength of concrete is as follows. $F_c=896.3V_p-3514$ ($R^2$ = 0.81) where, $F_c$ : compressive strength($kgf/cm^2$), $V_p$ : ultrasonic velocity(km/sec).

• Journal of Korea Foundry Society
• /
• v.7 no.2
• /
• pp.122-132
• /
• 1987

Full mold casting process is a new technique offering numerous advantages and promising possibilities. The present study is aimed to bring out the results of experiments carried out to study the effect of pattern coatings on the solidification of 99.5% pure aluminum plate-shaped castings in the various sand molds and the thermal behavior of the molds. The results of the investigation indicate that (i) with increase in pattern coating thickness, the relative chilling power decreases gradually for silica and increases for zircon coating, and (ii) the application of a pattern coating significantly reduces the maximum interface temperature by the mold which is more pronounced in the case of thinner mold wall. The investigation also indicates that Chvorinov's rule is not found to be valid for the casting in the full mold, with or without pattern coating. Therefore in full mold process, the pattern coating thickness will be a very important parameter in the study of thermal behavior.

• Advances in concrete construction
• /
• v.8 no.3
• /
• pp.199-206
• /
• 2019

High performance sandcretes (HPS) are new concretes characterized by particles having a diameter less than 5 mm, as well as very high mechanical strength and durability. This work consists in finding solutions to make sandcretes with good physico-mechanical and durability properties for this new generation of micro-concrete. However, upgrading ordinary sandcrete into high performance sandcrete (HPS) requires a thorough study of formulation parameters (equivalent water/binder ratio, type of cement and its dosage, kind and amount of super plasticizer, and gravel/sand ratio). This research study concerns the formulation, characterization and durability, in a sulphate environment, of a high performance sandcrete (HPS), made from local materials. The obtained results show that the rheological properties of fresh concrete and mechanical strength differ with the mineralogy, density and grain size distribution of sands and silica fume used.

• Computers and Concrete
• /
• v.10 no.1
• /
• pp.49-57
• /
• 2012

Nano-particle-reinforced cement mortars have been the basis of research in recent years and a significant growth is expected in the future. Therefore, optimization and quantification of the effect of processing parameters and mixture ingredients on the performance of cement mortars are quite important. In this work, the effects of nano-silica, water/binder ratio, sand/binder ratio and aging (curing) time on the compressive strength of cement mortars were modeled by means of artificial neural network (ANN). The developed model can be conveniently used as a rough estimate at the stage of mix design in order to produce high quality and economical cement mortars.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.3
• /
• pp.219-229
• /
• 1996

Recent construction activity of infrastructures has been booming and accelerating to incur shortage of river sand for concrete works. Thus, sea sand has been excessively used instead of river sa.nd, that directly causes to decrease the quality and the durability of concrete, and then might lead to the collapse of concrete structures. The purpose of this experimental research is not only to develop high-strength concrete using sea sand, but also to investigate mechanical properties of high-strength concrete, such as elastic moduli, compressive strength and etc, which could be used for important design data of concrete structures. Rational analytic formula for elastic moduli have been proposed together with those for the splitting tensile strength and the flexural strength, which are to be predicted from compressive strength of concrete cylinder. Optimum water-cement and water-binder ratio have been experimentally obtained so as to develop high compressive strength with and without using silica fume as a admixture for concrete. It is noted that experimental elastic moduli for high strength concrete above aCk=330kgf /cm2 are less than those by the Code. Appropriate amount of concrete mixture has been experimentally investigated so as to develop maximum compressive, flexural and splitting tensile strength.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.23-38
• /
• 2014

The composition of carbonate sands from a sabkha at Ruwais in the UAE differs from that of silica sand, and these sands are crushed easily under low compression pressures. Accordingly, particle crushing of carbonate sand occurs under high pressure, which results in additional settlement and reduces the shear strength. In this study, consolidation and triaxial tests were conducted to analyze the characteristics of carbonate sands following particle crushing. The unusual shear strength graphs of the carbonate sands result from the degree of particle pre-crushing. For the range at p' > p in the p (p')-q diagram, negative (-) excess porewater pressures occur if the axial pressure causes particle crushing that induces exposure of the inner voids. In addition, the q value decreased after particle crushing. In conclusion, the unusual characteristics of the carbonate sands were induced by particle crushing. The triaxial tests revealed that the degree of particle pre-crushing influenced the excess porewater pressure.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.35-41
• /
• 2005

Recently, various fiber reinforced cementitious composites are used in order to solve problems of concrete as the brittleness breaking. Especially, in U.S.A., Europe, and Japan, ultra-high strength steel fiber reinforced cementitious composites(ultra-high strength SFRCC) with compressive strength in excess of 100 MPa were developed. However few studies have been investigated on the high-strength SFRCC in Korea. Therefore, in this paper, to make ultra-high strength SFRCC with the range of compressive strength 180MPa, it was investigated the constitute factors of ultra-high strength SFRCC influenced on the compressive strength. The experimental variables were water-binder ratio, replacement of silica fume, size and proportion of sand, type and replacement of filling powder, and using of steel fiber in ultra-high strength SFRCC. As a result, in water-binder ratio 0.20, we could make ultra-high strength SFRCC with compressive strength of 180MPa through using of silica fume, quartz sand with below 0.5mm filling powder and steel fiber.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.3
• /
• pp.285-294
• /
• 1994

Dried top and root extracts of seven different weed species, fresh top and root extracts, and various concentrations of extract (0, 5, 10 and 15%, W/V) and residue rate (0.0, 0.25. 0.5, 0.75 and 1.0%) of velvetleaf (Abutilon theophrasti Medic.) were used to study their allelopathic effects on alfalfa in the laboratory and greenhouse. Top and root aqueous extracts of common lambsquarter (Chenopodium album L.), giant foxtail (Setaria faberii Herrm), redroot pig-weed (Amaranthus retroflexus L), velvetleaf, large crabgrass (Digitaria sanguinalis L), canada thistle (Cirsium arvense L.) and prostrate knotweed (Polygonium aviculare L.) significantly inhibited germination, seedling length, weight, and vigor in alfalfa. Top growth extracts of weeds exhibited greater allelopathic effects than root extracts. Alfalfa test species, WL-320, responded significantly different to the various weed species extracts in terms of allelopathic effect. The regression slopes of various top extracts showed significant variation with respect to germination percentage. Velvetleaf (b=3.69) extracts were the most inhibitory, while large crabgrass (b=2.39) extracts had the least allelopathic effect on alfalfa. When compared the activity of fresh velvetleaf extract to that of dry velvetleaf extract, dry extract was more inhibitory to alfalfa germination and seedling growth. Germination, seedling length and weight of alfalfa were inversely proportional to the concentration of dried velvetleaf extracts. Seedling emergence and survival percentage was inhibited by velvetleaf residue mixture treatment. Also, more of the toxic effects were observed from the dried top extracts, as compared to extracts from fresh top and root. These results demonstrate the allelopathic activity of different weed species extracts and suggest that weeds may affect crop growth and development due to the inhibitory effects of allelochemicals present in weed tissue.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.3
• /
• pp.295-305
• /
• 1994

Greenhouse and laboratory studies were conducted to investigate the allelopathic potential of alfalfa and vetch residues on soybean and corn using various extract concentrations (0, 5, 10, 15 and 20%, w/v) and residue rates (0, 0.25, 0.5, 0.75 and 1%, w/w). Aqueous extracts of alfalfa (Medicago sativa L.) and vetch (Vicia spp.) exhibited an allelopathic effect on soybean and corn seed germination, seedling length and weight. The degree of inhibition significantly increased as the aqueous extract concentration increased. Alfalfa and vetch 20% extracts reduced soybean seed germination, seedling length and weight by 35%, 57%, 32% and 15%, 42%, 25% respectively, when compared to control. Corn germination, seedling length and weight was inhibited by 20%, 23%, 38% by alfalfa and 19%, 18%, 35% by 20% vetch extracts. Alfalfa and vetch extracts inhibited secondary root formation and branching as the extract concentration increased. Alfalfa and vetch 20% extracts inhibited by 41% and 32% secondary root numbers, respectively as compared to control. It was found that the aqueous extract of alfalfa resulted in greater reduction in germination, seedling length and weight of soybean than that of vetch. Alfalfa and vetch 1% residue rate inhibited soybean plant height by 30% and 10%, leaf area by 31% and 23%, and dry weight by 18% and 1%, nodule number by 27% and 20% also. Alfalfa and vetch residue significantly enhanced plant height, leaf area and dry weight of corn. The maximum stimulation occurred with 0.25% and 1% of alfalfa and vetch residue rates, respectively. Plant height, leaf area, and dry weight increased by 23%, 59%, 58% and 17%, 52%, 94% with alfalfa and vetch residues of 0.25% and 1%, respectively. This study demonstrates that there is an allelopathic potential resulting from alfalfa and vetch residues on soybean growth and yield. It also suggests that these residues may affect crop growth and development due to the inhibitory or stimulatory effects of allelochemicals existing in the residue.

• Korean Journal of Weed Science
• /
• v.15 no.2
• /
• pp.121-130
• /
• 1995

Greenhouse and laboratory studies were conducted to investigate allelopathic potential of some weed species on alfalfa(Medicago sativa L.) germination and seedling growth. In the comparison between top(leaves+stems) and root extracts, top extract exhibited greater allelopathic effects on alfalfa germination than that of root. The various weed species extract differently responded to alfalfa test species, WL-320, in terms of allelopathic effect. Top and root aqueous extracts of lambsquarter(Chenopodium album L.), giant foxtail(Setaria faberii Herrm.), redroot pigweed (Amaranthus retroflexus L.), velvetleaf(Abutilon theophrasti Medic.), crabgrass(Digitaria sanguinalis L.), canada thistle(Cirsium arvense L.) and prostrate knotweed(Polygonium aviculare L.) significantly inhibited germination, seedling length, weight, vigor, and rate of germination of alfalfa. The regression slopes of various top extracts showed that velvetleaf(b=3.69) extracts were the most inhibitory, while large crabgrass(b=2.39) extracts had the least allelopathic effect on alfalfa germination. Germination, seedling length and weight of alfalfa were inversely proportional to the concentration of dried velvetleaf extracts. Also, more of the toxic effects were observed from the dried extracts compared to the fresh extracts. Residue of velvetleaf inhibited significantly alfalfa emergence and survival percentage compared to the control. The emergence and survival percentage of alfalfa were 44%, 57% at 1.0% residue treatment, respectively. When weed residues were mixed with silica sand with incubation time, velvetleaf residue most inhibited alfalfa growth. The degree of inhibition increased as incubation time increased. An incubation for 72h caused the greatest inhibition of alfalfa growth. These results demonstrate the different allelopathic activity of weed species extracts on alfalfa and suggest that weed may affect alfalfa growth and development through the inhibitory effects of allelochemicals present in weed tissue.