• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.140-143
• /
• 2004

Heat of hydration of concrete under different curing temperatures can be characterized with knowledge of the thermal activity, the heat rate at the reference temperature, and the total heat of hydration of the mixture. The so-called multi-component hydration model incorporates the effect of following variables: cement chemical composition, cement fineness, secondary cementitious powders, mixture proportions, and concrete properties. However, the model does not consider the use of silica fume as a secondary cementitious powder. Therefore, the model that quantifies the heat of hydration due to the use of silica fume is needed. In this thesis, the effects of silica fume on heat of hydration are evaluated and the influence on the heat of hydration are also quantified to be included in the model, so that the analysis using modified multi-component hydration model for silica fume concrete provides more accurate results than normal concrete.

• 한국재료학회지
• /
• 제16권6호
• /
• pp.355-359
• /
• 2006

Fine silica powders were synthesized via w/o emulsion method using sodium silicate, ammonium sulfate, Triton N-57, and cyclohexane as silica source, precipitating agent, surfactant, and oil phase, respectively. The powders were prepared under a conventional process and an ultrasonic process using the same reactants at room temperature for 1 hr varying the concentration of $Na_2SiO_3$ solution and the mol ratio of $H_2O$/surfactant, respectively. The particle size of the silica powder was reduced with decreasing the concentration of sodium silicate solution and with increasing the mol ratio of $H_2O$/surfactant under with and without ultrasounds. The size of powder with ultrasounds was smaller than that without ultrasounds, which indicates that the application of ultrasound in the synthesis of silica powder is an efficient way to reduce particle size.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.390-398
• /
• 1991

$\beta$-Sialon powder was prepared from Wando pyrophyllite by the carbothermic reduction and nitridation at 135$0^{\circ}C$ for 10 h nitrogen atmosphere. Amorphous silica prepared from Si(OC2H5)4 was added to Wando pyrophyllite powder in order to control the final Z value. Two different methods were applied for synthesis of $\beta$-sialon powders. In Process A, the amorphous silica prepared from Si(OC2H5)4 was admixed to Wando pyrophyllite powder. Process B was started from the mixture of Wando Y2O3 was added to the synthesized $\beta$-Sialon powders as a sintering aid, and the mixed powders were hot pressed at 175$0^{\circ}C$ for 120 min in nitrogen atmosphere under 30 MPa. Their mechanical properties were compared. The maximum values of M.O.R., hardness and KIC were 667 MPa, 16 GPa and 6.3 MN/m3/2, respectively, and they are the values obtained form $\beta$-Sialon ceramics prepared by process A of Z=0.5.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.30-34
• /
• 2019

Copper (Cu)-incorporated silica aerogel was synthesized by a sol-gel process with two-step drying process for color modification. The microstructure of the silica aerogel was not affected significantly by the Cu concentration and an amorphous structure was maintained without any crystalline impurity phases. The textural properties of the silica aerogels investigated by using N2 adsorption-desorption isotherms exhibited the typical features of mesoporous materials. The pore size and porosity were not changed significantly even with the incorporation of Cu up to 1.5 M, which indicates negligible variation of thermal insulating properties. However, the color of the aerogel changed from white and light greenish to dark greenish with increasing Cu content. The color change of the silica aerogel was due to the modification of the electron energy band structure of silica by the Cu atomic levels. Therefore, the color of the silica aerogel powders could be manipulated by incorporating Cu without degrading the thermal insulating properties.

• 공업화학
• /
• 제19권6호
• /
• pp.685-689
• /
• 2008

충전제의 종류 및 분산 시간에 따른 박막의 특성 평가를 실시하였으며, 그 결과 투과도 측면에서 유리한 중공 실리카를 선택하여 충전제의 함량별 그리고 코팅 두께별 haze, 투과도, 그리고 광택도에 대한 실험을 각각 실시하였다 그 결과, 충전제의 함량이 증가할수록 haze값은 증가하고 광택도 값은 이와는 반대로 감소하였다. 또한, 필름 표면에의 코팅 두께가 증가할수록 충전제의 함량변화 때와는 정 반대로 haze값은 감소하고 광택도는 증가하였다. 그리고 투과도의 경우에는 두 가지 경우 모두 거의 일정한 수준으로 변화를 보이지 않았다. 결론적으로 충전제로서 중공 실리카를 사용할 경우 함량 증가와 투과도면에서 매우 유리함을 알 수 있었다.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.145-148
• /
• 2012

Spherical silica aerogel powders were fabricated via an emulsion polymerization method from a water glass. A water-in-oil emulsion, in which droplets of a silicic acid solution are emulsified with span 80 (surfactant) in n-hexane, was produced by a high power homogenizer. After gelation, the surface of the spherical silica hydrogels was modified using a TMCS (trimethylchlorosilane)/n-hexane solution followed by solvent exchange from water to n-hexane. Hydrophobic silica wet gel droplets were dried at 80 ℃ under ambient pressure. A perfect spherical silica aerogel powder between1 to 12 ㎛ in diameter was obtained and its size can be controlled by mixing speed. The tapping density, pore volume, and BET surface area of the silica aerogel powder were approximately 0.08 g·cm-3, 3.5 ㎤·g-1 and 742 ㎡·g-1, respectively.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.494-498
• /
• 2012

Geopolymer cements and geopolymer resins are newly advanced mineral binders that are used in order to reduce the carbon dioxide generation that accompanies cement production. The effect of additives on the compressive strength of geopolymerized class-F fly ash was investigated. Blast furnace slag, calcium hydroxide($Ca(OH)_2$), and silica fume powders were added to fly ash. A geopolymeric reaction was initiated by adding a solution of water glass and sodium hydroxide(NaOH) to the powder mixtures. The compressive strength of pure fly ash cured at room temperature for 28 days was found to be as low as 291 $kgf/cm^{-2}$, which was not a suitable value for use in engineering materials. On the contrary, addition of 20 wt% and 40 wt% of blast furnace slag powders to fly ash increased the compressive strength to 458 $kgf/cm^{-2}$ and 750 $kgf/cm^{-2}$, respectively. 5 wt% addition of $Ca(OH)_2$ increased the compressive strength up to 640 $kgf/cm^{-2}$; further addition of $Ca(OH)_2$ further increased the compressive strength. When 2 wt% of silica fume was added, the compressive strength increased to 577 $kgf/cm^{-2}$; the maximum strength was obtained at 6 wt% addition of silica fume. It was confirmed that the addition of CaO and $SiO_2$ to the fly ash powders was effective at increasing the compressive strength of geopolymerized fly ash.

• 한국세라믹학회지
• /
• 제54권3호
• /
• pp.222-227
• /
• 2017

Flake-type micro hollow silica was synthesized by precipitation method using an $Mg(OH)_2$ inorganic template and sodium silicate and ammonium sulfate as the silica precursors. We investigated the effects of the silica precursor concentration on the shape, shell thickness, and surface of the hollow silica. When the concentration of the silica precursor was 0.5 M, the hollow silica had a smooth and translucent thin shell, but the shell was broken. On the other hand, the shell thickness of the hollow silica changed in the range of 12 nm to 18 nm with the increase of the precursor concentration from 0.7 M to 1.1 M. Simultaneously, unintended spherical silica satellites were created on the shell surface. The number of satellites and the size rose according to the increased concentration of silica precursor. The reason for the formation of spherical silica satellites is that the $NH_4OH$ nucleus generated in the synthesis of hollow silica acted as another silica reaction site.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1318-1323
• /
• 2013

Thermal insulation material was prepared by cross-linking chemical reaction of silica aerogel and epoxy resin, which has a high porous and vacant properties. The structural, mechanical, and thermal properties were analyzed in order to verify its application for industrial and electrical applications. The thermal conductivities were changed from 115 mW/mK to 75 mW/mK by reducing the contents of nano-porous silica areogel powders. The compressive loading is also decreased by increasing the contents of silica aerogels by 20 wt% in aerogel/epoxy composites. It is concluded that the formulated composite materials can be applied to building materials, electronics parts, and heavy industries.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1362-1367
• /
• 2012

High porous silica aerogel/polyurethane polymer composite was manufactured by cross-linking polymerization of polyurethane foaming process. The properties of microstructure, mechanical strength, and thermal properties were investigated for its various applications. The superhydrophobic silica aerogel powders were used for highly thermal insulation filler materials. The thermal conductivities can be resulted 0.07 W/mK to 0.13 W/mK, by decreasing the contents of silica aerogels in composite materials. It is found that the polymerization formulation by organic binders can be applied to heavy industires, building materials, and various industries.