• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.678-684
• /
• 2001

Porous silica-pillared montmorillonites were prepared by simultaneous intercalation of dodecylamine-TEOS [tetraethylorthosilicate, Si(OC2H5)4] into the H-montmorillonite and intragallery amine-catalyzed hydrolysis of TEOS. Mixtures of the H-montmorillonite, dodecylamine and TEOS at molar ratios of 1 : 2 : 15-30 and 1 : 2-6 : 20 resulted to swollen and viscous gel once at room temperature, allowing intercalation compounds which dodecylamine and TEOS were simultaneously intercalated into interlayer of H-montmorillonite. The hydrolysis of the gallery TEOS was conducted in water solution for 40 min at room temperature, affording siloxane-pillared H-montmorillonite. Calcination of samples at 500 $^{\circ}C$ in air resulted in silica-pillared montmorillonite with large specific surface areas between 403 and 577 m2 /g, depending on the reaction stoichiometry. The reaction at H-montmorillonite : dodecylamine : TEOS reaction stoichiometries of 1 : 2 : 15 and 1 : 4 : 20 resulted in high specific surface areas and mesopores with a narrow pore size distribution. Result indicates that the intragallery-amine catalyze the hydrolysis of gallery-TEOS and simultaneously have a role of gallery-templated micellar assemblies.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.498-506
• /
• 2016

1, 2-Hexanediol galactoside (HD-gal) has been previously synthesized from 1, 2-hexanediol (HD), in which recombinant ${\beta}$-galactosidase (${\beta}$-gal) of Escherichia coli (E. coli) was used for transgalactosylation reaction. In this study, a method for HD-gal purification from the reaction mixture was particularly investigated. Using ${\beta}$-gal-containing E. coli, HD-gal was synthesized from 75 mM HD for 48 hr under 300 g/l lactose concentration. Then, HD-gal synthesis from HD was confirmed by TLC analysis, and the existence of E. coli ${\beta}$-gal during 48 hr-reaction was also confirmed by Western blotting, in which the conversion yield of HD to HD-gal reached about 94% during 48 hr. To establish an efficient method for HD-gal purification, we carried out the solvent extraction of the reaction mixture, followed by silica gel chromatography, particularly in order to remove the residual HD. Two water-immiscible solvents, such as methylene chloride and ethyl acetate, were investigated comparatively to find out appropriate solvent. Then, it was found that residual HD was almost removed when ethyl acetate extraction of water phase of reaction mixture was carried out four times. Subsequently, silica gel chromatography was carried out, and purified HD-gal could be finally obtained. The production yield for HD-gal from 75 mM HD was $8.9{\pm}0.6%$ (n=3) (mole basis) or $21.1{\pm}1.4%$ (n=3) (weight basis). For further study, using purified HD-gal, we will investigate the minimum inhibitory concentrations (MICs) of HD-gal against bacteria. In addition, cytotoxicity to human skin cells of HD-gal will be examined.

• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.180-186
• /
• 1991

A water soluble antifungal antibiotic, Solumycin, was separated from the culture broth of Streptomyces sp. LAM-593, isolated from soil, by butanol extraction, alumina-, 1st and 2nd Sephadex LH-20 column chromatography. The substance was pale yellow crystal which gave a single spot at Rf value 0.24 with ethanol-ammonia water-water (8:1:1), 0.46 with butanol-ethanol-water (5:1:4), 0.84 with 50% methanol on silica gel TLC. It was dissolved well in water, methanol and acidic aq. butanol but not in ethanol, acetone, ethyl acetate, chloroform. acetic acid etc., and gave positive Fehling and Molish reaction. The UV spectrum in methanol showed absorption at 342, 361, 380, and 404 nm. The antibiotic was active against fungi such as Candide, Cryptococcus, Saccharomyces, Trichophyton and Trichosporon, but not to bacteria such as Bacillus, Escherichia and Staphylococcus.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.719-723
• /
• 2004

Silica coating on ZnS particles with buffer solution has been investigated. Diluted sodium silicate in water was used as the precursor material and it was diluted in water. Sodium silicate was added drop-wise in the continuously stirred suspension of ZnS in the buffer solution at room temperature. Smooth and evenly distributed silica coated ZnS phosphors has been obtained when the pH of buffer solution was 10, the concentration of sodium silicate in water was 20 wt%, firing temperature was 500 $^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.19 no.4
• /
• pp.372-379
• /
• 1991

A rapid and simple quantitative assay method for aminoglycoside-3'- phosphotransferase (APH(3')) derived from E. coli ATCC 21990 was developed using the thin layer chromatographic densitometry, 3'-phosphorylated kanamycin B (3'-PKMB), product of APH (3') reaction, was separated from reaction mixtures by developing on the silica gel TLC plate with chloroform-methanol-ammonia water (3:4:3). The quantity of the 3'-PKMB was measured by densitometry after color development by ninhydrin method. Densitometric TLC assay for APH (3') was showed a good quantitative result and reproducibility. Sensitivity of this assay was 1.56 nmol of 3'-PKMB and could be analyzed many samples at same time. This method may be applicable for the analysis of inactivating enzymes of aminoglycoside antibiotics.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.4
• /
• pp.297-306
• /
• 2014

Recently nano-materials are gaining more importance in the construction industry due to its enhanced energy efficiency, durability, economy, and sustainability. Nano-silica addition to cement based materials can control the degradation of the fundamental calcium-silicate-hydrate reaction of concrete caused by calcium leaching in water as well as block water penetration and therefore lead to improvements in durability. In this paper, the influence of synthesized nano silica from locally available rice husk on the mechanical properties and corrosion resistant properties of OPC (Ordinary Portland Cement) has been studied by conducting various experimental investigations. Micro structural properties have been assessed by conducting Scanning Electron Microscopy, Thermo gravimetry and Differential Thermal Analysis, X-Ray Diffraction analysis, and FTIR studies. The experimental results revealed that NS reacted with calcium hydroxide crystals in the cement paste and produces Calcium Silicate Hydrate gel which enhanced the strength and acts as a filler which filled the nano pores present in concrete. Hence the strength and corrosion resistant properties were enhanced than the control.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.4
• /
• pp.317-322
• /
• 1999

Transparent films were prepared using the sol-gel process by mixing TEOS with PVA solution that was solved in EtOH and distilled water homogeneously. HCl, $CH_3COOH$ and $NH_4OH$ were used as catalysts of the sol-gel process, and for improving the flexibility of films glycerol was used as plasticizer. In case of each catalyst, transparency and tensile strength were increased, and glass transition temperature (Tg) was shifted to higher temperature with increasing TEOS ratio. Also, in case of adding the plasticizer, the flexibility of films was increased. On the contrary, transparency, thermal stability and tensile strength were decreased with increasing HCl and $NH_4OH$ ratio. Also, the range of being made of film type was expanded when $CH_3COOH$ was used than HCl and $NH_4OH$.

• Macromolecular Research
• /
• v.12 no.4
• /
• pp.413-421
• /
• 2004

Sulfonated poly(phthalazinone ether sulfone ketone) (SPPESK) membranes and sol-gel derived SPPESK/silica hybrid membranes have been investigated as potential polymer electrolyte membranes for direct methanol fuel cell (DMFC) applications. In comparison with the SPPESK membrane, the SPPESK/silica membranes exhibited higher water content, improved proton conductivity, and lower methanol permeability. Notably, the silica embedded in the membrane acted as a material for reducing the fraction of free water and as a barrier for methanol transport through the membrane. From the results of proton conductivity and methanol permeability studies, we suggest that the fractions of bound and free water should be optimized to obtain desirable proton conductivities and methanol permeabilities. The highly sulfonated PPESK hybrid membrane (HSP-Si) displayed higher proton conductivity (3.42 ${\times}$ 10$^2$ S/cm) and lower methanol permeability (4.15 ${\times}$ 10$\^$7/ $\textrm{cm}^2$/s) than those of Nafion 117 (2.54 ${\times}$ 10$^2$ S/cm; 2.36 ${\times}$ 10$\^$6/ $\textrm{cm}^2$/s, respectively) at 30$^{\circ}C$. This characteristic of the SPPESK/silica membranes is desirable for future applications related to DMFCs.

• Food Science and Preservation
• /
• v.14 no.3
• /
• pp.332-335
• /
• 2007

Hot water and 95%(v/v) ethanol extracts were prepared from dried Lespedeza cuneata seeds and antioxidant compounds were isolated by solvent fractionation, silica gel adslorption chromatography, Sephadex LH-20 column chromatography, and preparative HPLC. Antioxidant activity was measured using DPPH radical scavenging activity. The 80%(v/v)ethanol and ethylacetate fraction of Lespedeza cuneata seed extracts had stronger antioxidant effects than did the n-hexane fraction. The active antioxidant compounds obtained from hot water and 95%(v/v) ethanol extracts may be identical, based on analysis by Sephadex LH-20 column chromatography and preparative HPLC.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.626-630
• /
• 2008

Poly(vinyl pyrrolidone) was used successfully to control the size and distribution of silver nanoparticles generated on inorganic silica nanofibers. The inorganic nanofibers were electro spun using sol-gel chemistry of silicates, and the diameter of the prepared nanofibers was unaffected by adding up to 7% of poly(vinyl pyrrolidone). The silver ions, in the form of silver nitrate, were introduced into the silica nanofibers and reduced to metallic silver by ultraviolet irradiation with a subsequent thermal treatment. The size of the generated silver particles was decreased dramatically by adding poly(vinyl pyrrolidone). The size of the silver nanoparticles was 73 nm when no poly(vinyl pyrrolidone) was added but 23 nm with the addition of only 1% of poly(vinyl pyrrolidone). The extent of reduction could be checked by determining the concentration of silver ions leached into water from the silica nanofibers. After thermal treatment of the silica nanofibers, more than 99% of the silver remained in the nanofibers, indicating almost complete reduction of the silver ions to silver metal.