• Journal of Oral Medicine and Pain
• /
• v.19 no.1
• /
• pp.137-149
• /
• 1994

This study was performed to investigate the relationship between Forward Head Posture(FHP) and Craniomandlbular Disorders(CMDs). Many studies reported that there was some relationship between them, however, there is still controversy. So It Is necessary to observe and compare many more patients with CMDs wirh normal controls. For the study 85 patients with CMDs and 37 dental students were selected as experimentals and controls, respectively. And the experimentals were classified Into two groups, that is, TMJ internal derangement group and muscle disorders group according to clinical diagnosis. For measuring the FHP, CROM(Cervical-Range-of-Notion)was used. This goniometer is composed of three part. First, gravity goniometer for flexion and extension. Second, magnetic compass and yoke for rotational movement. And last, forward head arm and vertebra locator for forward head posture. Next T-Scan, electronic occlusal analyzer, was used for recording of occlusal contact state. Other items such as maximum opening, lateral excursion, Helkimo's anamnestic index, and muscle palpation point from Friction's craniomandibular index were checked clinically by one examiner. The result of this study were as follows : 1. In male, control group showed much more measurement in resting forward head posture than did experimental group. But there were not significant differences between groups in female subject. From this results, the author contended that CROM is new measuring system and differ from other goniometers in some aspect, so that results should be re-evaluated 2. Mean value of maximum mouth opening in nearly all groups were greater than 40mm. and mouth opening had a significant correlation with occlusal force and with anamnestic index both sex. 3. Mean value of palpation point had not any correlationship with forward head posture in both sex, but there was significant difference between upper and lower group by rounded shouldes. 4. In summary, there was no significant relationship between forward head posture and sign and symptom of Craniomandibular Disorders.

• Speech Sciences
• /
• v.15 no.2
• /
• pp.131-141
• /
• 2008

The purpose of this study was to find out the acoustic variation on the pre-and post respiration and oral motor for children with cerebral palsy. Five children with spastic CP at the age of 6 in average were practiced by a caregiver at home each for 25 minutes, in total, 45 times. The sustained of vowel /a/ and vowels /a/, /i/, /u/, /e/, /o/ were recorded on CSL and MDVP and analyzed by acoustic parameters. As a result, the maximum phonation time(MPT) was increased from 2.06 to 6.31 and the formant of vowels(F1, F2, F3) had significant differences in F1(/a, i/), F2(/i.u.o/), and F3(/a/) between the controls and the children with CP in pre-treatment. The total average value of vowels had significant differences between the pre-and post-treatment (p< .05). The energy of vowels had significant differences in the vowels /i, u, e, o/ and the total average value between the pre-and post-treatment(p< .001). The jitter percent, shimmer percent, and noise to harmonic ratio had significant differences between the pre-and post-treatment(p< .05). As the respiration and the oral motor improved MPT, voice quality, and articulation of vowel, and the variation of the formant(F1, F2, F3) showed the changes in the shape of lips, the place and the height of the tongue, the various development of therapy programs and the consistent intervention of treatment is needed for the children with cerebral palsy.

• Phonetics and Speech Sciences
• /
• v.4 no.2
• /
• pp.89-94
• /
• 2012

The aim of this study is to investigate the usefulness of the parameter CPP (cepstral peak prominence) and LTAS (long term average spectrum) band energy for an analysis of breathy voice with vocal fold paralysis. Thirty-four female subjects who have vocal paralysis after thyroidectomy participated in this study. According to the perceptual judgements by three speech pathologists and one phonetic scholar, subjects were divided into two groups: breathy voice group (n = 21) and non-breathy voice group (n = 13). Maximum sustained phonation task was measured for acoustic analysis. CPP-related (i.e. mean F0, mean CPP, and mean CPPs) and LTAS-related (i.e. minimum, maximum, and mean) parameters were used. Independent samples t-test was conducted. Regarding CPP, there are significant differences in mean CPP and mean CPPs between groups. The values of mean CPP and CPPs in the non-breathy voice group are higher than those in the breathy voice group. The CPP could be regarded as the useful parameter for breathy voice analysis in the clinic. When it comes to LTAS, energy from 0 to 2 kHz are significantly different between groups. The minimum value of non-breathy group is lower than that of breathy group, whereas the maximum value of non-breathy group is higher. The frequency band below 2 kHz seems to be related to breathy voice.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.11
• /
• pp.4537-4556
• /
• 2020

This research was based on the study conducted by Khodaei et al. (2012), namely, the least-significant-bit (LSB) substitution combined with the pixel-value differencing (PVD) steganography, and presented an improved irreversible image steganography method. Such a method was developed through integrating the improved LSB substitution with the modulus function-based PVD steganography to increase steganographic capacity of the original technique while maintaining the quality of images. It partitions the cover image into non-overlapped blocks, each of which consists of 3 consecutive pixels. The 2nd pixel represents the base, in which secret data are embedded by using the 3-bit LSB substitution. Each of the other 2 pixels is paired with the base respectively for embedding secret data by using an improved modulus PVD method. The experiment results showed that the method can greatly increase steganographic capacity in comparison with other PVD-based techniques (by a maximum amount of 135%), on the premise that the quality of images is maintained. Last but not least, 2 security analyses, the pixel difference histogram (PDH) and the content-selective residual (CSR) steganalysis were performed. The results indicated that the method is capable of preventing the detection of the 2 common techniques.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.740-744
• /
• 2002

The relationship of gonad weight and liver weight with body weight of six fish species viz; Catla catla, Labeo rohita, Cirrhina mrigala, Hypophthlamichthys molitrix, Ctenopharyngodon idella and Cyprinus carpio under the influence of artificial feed, broiler manure, buffalo manure, N:P:K (25:25:0) and a control pond were examined after a rearing period of one year. The positive relationship between gonad weight and body weight was significant which showed the dependence of gonadal development on body weight in all the six fish species. The currelation coefficients were higher in female fishes. However, the major carps had a much smaller proportional gonadal weight as compared with Chinese carps and a common carp due to their faster growth rate. The overall comparison of six fish species under different experimental treatments revealed that highest liver weight was observed for C. idella closely followed by C. carpio. The maximum correlation value was observed with H. molitrix under the broiler manure. The maximum Gonadosomatic Index (GSI) remained as 32.63 for C. carpio followed by C. idella. The maximum value for Hepatosomatic Index (HSI). remained 1.99 for C. idella followed by C. mrigala.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.1
• /
• pp.53-59
• /
• 2002

This study is research for effect of the involved lower limb weight bearing training on symmetrical weight supporting rate improvement by practicing involved lower limb weight bearing training of three weeks period to improve standing equilibrium problem with asymmetric weight supporting rate of hemiplegia. In result of the study, it has shown that P-value incase of involved supporting rate is lower than level of significance $\alpha$<.05 and mean improvement rate of experienced group is higher in comparison with controlled group and experienced group. In changing quantity of involved maximum supporting rate, P-value is .26 and higher than level of significance $\alpha$<.05, and so it did not show significant difference statistically. But in case of experienced group between pre and post-test, involved side supporting rate and involved side maximum supporting rate showed significant improvement in all. In comparison of relative characteristic training effect difference, it was shown that train-learning effect on case of 40-60 years old, hemorrhagic patient and standard body bun of patient is valuable, which showed significant improvement in case of paralytic side and disease period, it did not show significant difference on excercise learning effect in two above cases. In the above result, we can say that continuous weight bearing training on the involved lower limb for three weeks period help improve the involved side supporting rate of hemiplegia. Accordingly, the weight bearing training on the involved lower limb is training method that patient can easily train with simple guidance of therapists, without being special expensive equipment. Furthermore it can be helpful to establish home therapeutic plan for hemiplegia through education of a patron.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.236-245
• /
• 2002

The acrylic resin was first introduced as denture base materials in 1937 and it is commonly used for denture base fabrication nowadays. Three different curing cycles (Conventional curing cycle, short curing cycle and long curing cycle) and three commercially available heat-activated acrylic resins (Vertex RS, Lucitone 199 and ProBase Hot) were investigated to find the curing cycle and material that showed the minimum shrinkage of the resin during polymerization process. A brass master mold was fabricated and duplicated by additional silicone impression material. Stone molds were made by pouring of type III dental stone (SILKY-ROCK YELLOW, Whip-Mix, Louisville, Kentucky). It was embedded in the flask. Strain gauge and thermocouple were embedded in the specimen. Strain gauge and thermocouple were connected to signal conditioning amplifier and data was recorded by pre-programmed software. The parameters ESmax (Maximum expansion strain), Sb (Strain measured just before deflasking procedure), Sa (Strain measured just after deflasking procedure) and Sf (Strain measured at the end of the experiment) were measured. ${\Delta}$S was calculated from Sb and Sa (${\Delta}$S=Sb-Sa). In the experiment concerned about materials, the parameters 90-ESmax (Maximum expansion strain measured during early 90 minutes of curing procedure), 180-ESmax (Maximum expansion strain measured from 90 minutes to 180 minutes), Sb, Sa, ${\Delta}$S and Sf were measured and the following conclusions were made. 1. The ESmax value of conventional curing cycle showed the largest value and the 180-ESmax value of Lucitone 199 showed the smallest value. 90-ESmax values showed no significant difference (p<0.05). 2. ${\Delta}$S values of conventional curing cycle showed the positive values. ${\Delta}$S values of short curing cycle and long curing cycle showed the negative values. All three materials cured by conventional curing cycle showed the positive values. 3. The Sf values of long curing cycle and ProBase Hot (cured by conventional curing cycle) showed the smallest values.

• Journal of Plant Biology
• /
• v.33 no.2
• /
• pp.141-146
• /
• 1990

Germination and vegetative growth of Enteromorpha multiramosa Bliding from Pyoson, Cheju Island were investigated in laboratory under various combinations of temperature (5-$25^{\circ}C$) and salinity (8-48$^{\circ}C$). Percent level of germination was relatively high at all combinations of the two factors. The highest value among the combinations was revealed at 15$^{\circ}C$ and 32$\textperthousand$. Dry weight also was fairly high at all levels of combination with maximum value at 2$0^{\circ}C$ and 32$\textperthousand$. Analysis of variance for germination and growth was completed respectively and polynomial prediction models were constructed. F ratio revealed that all factors had a significant effect (p<0.001) on percentage of germination and dry weight, and their interactions also were significant (p<0.001), although the F ratio of interactions was far less than that for either the separate effect of temperature or salinity. Response surface of polynomial equation represented that temperature influenced less than salinity on germination, while it effected remarkably on vegetative growth, so the Enteromorpha multiramosa was kept to visible macrothalli from winter to spring in Cheju Island.

• Nuclear Engineering and Technology
• /
• v.47 no.1
• /
• pp.59-65
• /
• 2015

Background: After the Fukushima accident, the importance of hazard analysis for extreme external events was raised. Methods: To analyze typhoon-induced hazards, which are one of the significant disasters of East Asian countries, a statistical analysis using the extreme value theory, which is a method for estimating the annual exceedance frequency of a rare event, was conducted for an estimation of the occurrence intervals or hazard levels. For the four meteorological variables, maximum wind speed, instantaneous wind speed, hourly precipitation, and daily precipitation, the parameters of the predictive extreme value theory models were estimated. Results: The 100-year return levels for each variable were predicted using the developed models and compared with previously reported values. It was also found that there exist significant long-term climate changes of wind speed and precipitation. Conclusion: A fragility analysis should be conducted to ensure the safety levels of a nuclear power plant for high levels of wind speed and precipitation, which exceed the results of a previous analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1342-1359
• /
• 2021

The data deduplication technique identifies the duplicates and minimizes the redundant storage data in the backup server. The chunk level deduplication plays a significant role in detecting the appropriate chunk boundaries, which solves the challenges such as minimum throughput and maximum chunk size variance in the data stream. To provide the solution, we propose a new chunking algorithm called Dynamic Prime Chunking (DPC). The main goal of DPC is to dynamically change the window size within the prime value based on the minimum and maximum chunk size. According to the result, DPC provides high throughput and avoid significant chunk variance in the deduplication system. The implementation and experimental evaluation have been performed on the multimedia and operating system datasets. DPC has been compared with existing algorithms such as Rabin, TTTD, MAXP, and AE. Chunk Count, Chunking time, throughput, processing time, Bytes Saved per Second (BSPS) and Deduplication Elimination Ratio (DER) are the performance metrics analyzed in our work. Based on the analysis of the results, it is found that throughput and BSPS have improved. Firstly, DPC quantitatively improves throughput performance by more than 21% than AE. Secondly, BSPS increases a maximum of 11% than the existing AE algorithm. Due to the above reason, our algorithm minimizes the total processing time and achieves higher deduplication efficiency compared with the existing Content Defined Chunking (CDC) algorithms.