• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.171-177
• /
• 2007

In this paper, we have designed and implemented an optical signal processor in order to use in a fiber-optic current CT for electric equipments where its properties were discussed. The fabricated optical signal processor is used to reduce a measurement current error that induced by the effects of intensity variation in the optical output signal due to losses coming from optical components or polarization variation in a PFOCS. Also, the optical signal processor was fabricated in compact/lightweight with unification of opto-electronic transducer part, analog signal process part, and real-time measurement part consisted of a level shift and ${\mu}-processor$. The experiment of optical signal processor has been performed in the range of $0{\sim}7,500A$ using the PFOCS made all fiber-optic components. As a result of experiment, the linearity error of measurement current is less than 1.7% and its average error is less than 0.3% in the range of $1,000A{\sim}7,000A$.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.112-117
• /
• 1999

In case of spectral subtraction for noise robust speech recognition system, this method often makes loss of speech signal. In this study, we propose a method that variation and determination of Gaussian function at semi-continuous HMM(Hidden Markov Model) is made on the basis of SNR criteria function, in which SNR means signal to noise ratio between estimation noise and subtracted signal per frame. For proving effectiveness of this method, we show the estimation error to be related with the magnitude of estimated noise through signal waveform. For this reason, Gaussian function is varied and determined by SNR. When we test recognition rate by computer simulation under the noise environment of driving car over the speed of 80㎞/h, the proposed Gaussian decision method by SNR turns out to get more improved recognition rate compared with the frequency subtracted and non-subtracted cases.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.992-997
• /
• 1987

This paper describes the design and fabrication of an integrated circuit that can separate the horizontal SYNC., vertical SYNC. and composite SYNC. signal included in a composite video signal. The circuit that is based on the comparator level samplign method can separate a stable SYNC. signal even from an external circuit with large variation. It has been fabrivated by the SST bipolar process. Its chip size is 1.5x1.5mm\ulcorner As a result, we succeeded in fabrication of IC which satisfied DC characteristics and SYNC. singal separator function.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2114-2117
• /
• 2014

Joint pain is generally a common disorder not only for the old aged people but also for the immunocompromised patients. The present proposed study reveals the presence of inflammatory diseases in joint generally diagnosed by removing synovial fluid and changes in the volume and composition are examined for the presence of WBC and crystals. This study implement a non-invasive approach to identify the changes in joint fluid by measuring the changes in electrical property of the synovial tissue under the influence of electrical current signal with frequency range between 100 kHz to 300 kHz. The response of tissue for the current signal was measured in terms of potential drop across the tissue. The hardware system design consists of input and output sections. The input section which applies current signal to upper limb joint region is made of ICL8038 function generator IC with amplifier and voltage to current converter. The output section picks voltage variation using metal surface electrode, amplifier, ADC, PIC microcontroller and LCD interface. 100 patient inclusive of normal and disease affected patients where examined for upper limb synovial fluid variation and inflammatory diseases were identified.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.824-831
• /
• 2014

In this study, structural variations and overlay errors caused by multiple patterning lithography techniques to print narrow parallel metal interconnects are investigated. Resistance and capacitance parasitic of the six lines of parallel interconnects printed by double patterning lithography (DPL) and triple patterning lithography (TPL) are extracted from a field solver. Wide parameter variations both in DPL and TPL processes are analyzed to determine the impact on signal propagation. Simulations of 10% parameter variations in metal lines show delay variations up to 20% and 30% in DPL and TPL, respectively. Monte Carlo statistical analysis shows that the TPL process results in 21% larger standard variation in delay than the DPL process. Crosstalk simulations are conducted to analyze the dependency on the conditions of the neighboring wires. As expected, opposite signal transitions in the neighboring wires significantly degrade the speed of signal propagation, and the impact becomes larger in the C-worst metals patterned by the TPL process compared to those patterned by the DPL process. As a result, both DPL and TPL result in large variations in parasitic and delay. Therefore, an accurate understanding of variations in the interconnect parameters by multiple patterning lithography and adding proper margins in the circuit designs is necessary.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.9-15
• /
• 2008

A new ECT probe to separate the ECT signal distortion due to PVC (permeability variation clusters) and ordinary defects created in SG tubes has been developed. The hystersis loops of PVC which are extracted from retired SG (steam generator) tubes of Kori-1 NNP were measured. The tensile tests were performed to identify the mechanism of PVC creation. The conditions detecting the PVC created in 56 tubes were investigated using computer simulation, and the signal processing circuits were inserted in the probe for the digital signal transmission. The new Probe can measure and separate the PVC signal which is created in the SG tubes, and also measures the defects in Ni-sleeving part of SG tubes. furthermore the new ECT probe can measure the defects as fast as bobbin probe, and enhance the testing speed as well as reliability of the defect detection of SG tubes.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.27-35
• /
• 2003

Because of the lack of translation invariance of wavelet basis, traditional wavelet thresholding denoising leads to pseudo-Gibbs phenomena in the vicinity of discontinuities of signal. In this paper, in order to reduce the pseudo-Gibbs phenomena, wavelet coefficients are thresholded and reconstruction algorithm is implemented through minimizing the total variation of denoising signal using subgradient descent algorithm. Most of experiments were performed under the non-real-time and real-time environments. In the case of non-real-time experiments, the algorithm that this paper proposes was found more effective than that of wavelet hard thresholding denoising by 2.794㏈(SNR) based on the signal to noise ratio. And lots of pseudo-Gibbs phenomena was removed visually in the vicinity of discontinuities. In the case of real-time experiments, the number of iteration was restricted to 60 times considering the performance time. It took 0.49 seconds and most of the pseudo-Gibbs phenomena were also removed.

• Journal of Korea Multimedia Society
• /
• v.21 no.9
• /
• pp.1068-1075
• /
• 2018

We propose a method for driving loudspeakers from class D audio power amplifiers in current mode, instead of in conventional voltage mode, which was impossible with the feedback circuitry. Unlike analog audio amplifiers, Class D audio power amplifiers have signal delay between the input and output signals, which makes it difficult to apply the feedback circuitry for current-mode driving. The idea of the pre-distortion scheme used for the compensation of the non-linearity of RF power amplifiers is adapted to remedy the impedance variation effect of the loudspeakers for current driving. The method uses the speaker model for the pre-distorter to compensate for the speaker impedance variation with frequency. The simulation and test results confirms the validity of the proposed method.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.265-268
• /
• 2001

In content-based video data retrieval, the representative-frame is usually used. To do that, the skill of detection for scene change is needed. Generally the color histogram comparison is used, but sensitive to light variation and tends to miss the scene change of similar color histogram. This paper shows how to use both color histogram comparison and entropy to prevent the false-positive of scene change occurred by light variation. At the experiments, il is more powerful to light variation to use both color histogram comparison entropy than to use only color histogram comparison.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.21-27
• /
• 2007

The power line channel has time-variant characteristics caused by various kind of electrical devices. This characteristics are synchronized with the main voltage by their own characteristics. The main factors of disturbance are the variation of the channel impedance and noises. In other papers, the synchronous noise modeling has been achieved. But the modeling is not satisfied simultaneously with the time domain and the frequency domain and there are not any discussion about short-term variations of the channel impedance which cause to the signal fading. Therefore, this paper researched to solve problems about the signal fading by analyzing the short-term variation of the channel impedance, and proposed the synchronous noise modeling which is satisfied simultaneously in the time domain and the frequency domain.