• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.616-620
• /
• 2018

Recently, many researches have been conducted to improve the performance and wearability of smart wearables. In this study, we designed and fabricated the signal and power transmission textile cables for smart wearables which have excellent wearability, durability and reliability. For the signal transmission textile cables, conductive yarns for the signal line and the ground line were developed. Three types of signal transmission textile cables have been developed using the conductive yarns. Linear density, tensile properties, electrical resistance and RF characteristics were tested to characterize the physical and electrical properties of three signal transmission textile cables. The conductive yarns have the very low resistance of $0.05{\Omega}/cm$ and showed excellent uniformity of electric resistance. Therefore, the electrical resistance of the signal transmission fiber cable can be reduced by increasing the number of conductive yarns used in signal and ground lines. However, the radio frequency (RF) characteristics of the signal transmission textile cables were better as the number of strands of the conductive yarns used was smaller. This is because the smaller the number of strands of conductive yarn used in signal transmission textile cables, the narrower and more parallel the distance between the signal line and the ground line. It is expected that the signal and power transmission textile cable for signal and power transmission will be utilized in smart wearable products.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.416-419
• /
• 2016

When the integration density and operating frequency increase in the electronic circuits, it is important to improve the signal transmission characteristics. In this paper, the signal transmission characteristics of the printed circuit boards are analyzed with the curvature of the pads. From the simulation results, signal transmission characteristics are improved when pad curvature increases. Pad curvature more effects on signal transmission characteristics when the thickness of the transmission line and the length of the transmission decrease.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.3
• /
• pp.289-295
• /
• 2005

Instrumentation and Control (I&C) of the Neutral Beam Test Stand (NB- TS) Facility at the Korea Atomic Energy Research Institute (KAERI) for the Korea Superconducting Tokamak Advanced Research (KSTAR) project has been underway since the start of the project to answer the diverse requests arising from the various facets of the development and construction phases of the project. Optical signal transmission constitutes a significant portion of I&C works and has been performed for the entirety of the project. During the NB- TS construction and related experiments, significant achievements to a more accurate as well as more refined optical signal transmissions have been made. Examples of those I&C works that utilized the optical signal transmission are the Langmuir probe signal transmission, gradient grid current signal transmission, gas flow control and signal transmission, ion source temperature measurement, beam line component temperature monitoring, and coolant flow signal transmission, etc. These optical signal transition provisions are now performing part of the indispensable functions for the proper operation of the NB- TS facility. Attained experience and expertise are expected to be well applied to the upcoming main neutral beam injection (NBI) system construction for the KSTAR project.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1281-1283
• /
• 1995

In this paper, we develop a prototype of the Optical SCM transmission module. This module is possible to application to electric facilities for control and measurements. Transmission channel number is two channels, namely, image and digital signal. In the image transmission, modulation method is AM, baseband signal is NTSC video signal and demodulation use PLL. Modulation of digital signal is QPSK, 1.544Mbps and demodulation use PLL. First, we calculate theoretical analysis about RF and Optical link in the transmission. This calculation is well correspond with practical system and transmission experiment is excellent, but this is only two channel model. And now, we plan to multichannel transmission to measure intermodulation, frequency assignments and optimal channel numbers et al.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.193-206
• /
• 2002

A signal optimization model is proposed by applying the Cell-Transmission Model(CTM) as an embedded traffic flow model to estimate a system-optimal signal timing plan in a transportation network composed of signalized intersections. Beyond the existing signal-optimization models, the CTM provides appropriate theoretical and practical backgrounds to simulate oversaturation phenomena such as shockwave, queue length, and spillback. The model is formulated on the Mixed-Integer Programming(MIP) theory. The proposed model implies a system-optimal in a sense that traffic demand and signal system cooperate to minimize the traffic network cost: the demand departing from origins through route choice behavior until arriving at destinations and the signal system by calculating optimal signal timings considering the movement of these demand. The potential of model's practical application is demonstrated through a comparison study of two signal control strategies: optimal and fixed signal controls.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.77-80
• /
• 2001

In this paper, it is analyzed the statistical characteristics on the transmission performance of the optical SCM transmission in the CDMA RF signal relay system. Using Mach-Zehnder modulator, optical signal is regenerated into CDMA RF signal. Transfer function model of mach-Zehnder modulator is approximated to the third power of the input signal using Taylor series. BER results are analyzed under the multiple access interference and multi-path fading environment.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.95-100
• /
• 2012

We show that the minimum EOP (eye-opening penalty) obtained by tunable dispersion compensation is a function of a figure of merit for a nonlinear process, $I_0L_{eff}$, where $I_0$ is the optical intensity and $L_{eff}$ is the effective length of the interaction region. Using this rule, we do not need to conduct nonlinear simulations in all the cases of signal power and transmission length to obtain the signal distortion in dispersion-managed optical transmission. Instead, we need to conduct a simulation in only one case of a signal power and find the functional relation, and then we can obtain the values of the signal distortion in other cases using the discovered functional relation. This technique can reduce the number of nonlinear simulations to less than 10%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4390-4407
• /
• 2019

The paucity of pilot signals in Massive MIMO system is a vital issue. To accommodate substantial number of users, pilot signals are reused. This leads to interference, resulting in pilot contamination and degrades channel estimation at the Base Station (BS). Hence, mitigation of pilot contamination is exigency in Massive MIMO system. The proposed Time Shifted Pilot Signal Transmission with Pilot signal Hopping (TSPTPH), addresses the pilot contamination issue by transmitting pilot signals in non-overlapping time interval with hopping of pilot signals in each transmission slot. Hopping is carried by switching user to new a pilot signal in each transmission slot, resulting in random change of interfering users. This contributes to the change in channel coefficient, which leads to improved channel estimation at the BS and therefore enhances the efficiency of Massive MIMO system. In this system, Uplink Signal Power to Interference plus Noise Power Ratio (SINR) and data-rate are calculated for pilot signal reuse factor 1 and 3, by estimating the channel with Least Square estimation. The proposed system also reduces the uplink Signal power for data transmission of each User Equipment for normalized spectral efficiency with rising number of antennas at the BS and thus improves battery life.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.576-581
• /
• 2008

Electricity Market in Korea can't provide locational price signal through energy price because energy market is CBP(Cost Based Pool) using uniform price. Generators don't want to locate in a densely populated load area(like the metropolitan area). Because they are paid more fixed cost in metropolitan area. This situation has loss and congestion occurred in power system. However energy market without price signal can't lead generator to the metropolitan. So, market participants should be provided price signal through the transmission price instead of energy price. This paper proposes transmission pricing method considering reliability cost in order to offer price signal. Also, it proposes the method to allocate the transmission cost to each transmission line user through a fair and a reasonable manner. The transmission price is decided by the reliability value of each line. If a transmission line of high reliability value is broke, users using that line will get a loss and a discomfort. So, it is fair that users using a transmission line of high reliability value pay more than the other users. Also, it is reasonable that a transmission line owner get paid more form users using that line.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.213-219
• /
• 2012

In this paper, we suggested the method of signal integrity for noises and distortion signal generated between high speed information transmission modules by external effects. Suggested method for signal integrity of impedance matching to remove transmission line distortion, We divided the impedance matching between the transmitter and the receiver module with the single line and differential line methods after confirmed the improvement of signal distortions through ADS simulation. the experimental results indicated that it is possible to keep signal integrity without signal distortions by matching the optimal termination impedance which are considering the signal delay of transmission line for using the high-performance modules.