• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.18-25
• /
• 2002

In this paper, the performance of three types of serial concatenated convolutional codes (SCCC) in AWGN (additive white Gaussian noise) channel is compared and analyzed. As results of simulations, it can be observed that Type I shows the best error performance at lower signal-to-noise ratio (SNR) region. However, Type III shows the best error performance at higher SNR region. It can be also observed the error floor that the performance cannot be improved even though increasing of the number of iterations and SNR at Type I. However, the performance of Type II and Type III are still improved over the five iterations at higher SNR without error floor. And BER performance of three types can be closed to upper bound of three types with increase of SNR. It can be also observed that the upper bound of Type III shows the best performance among the three types due to the greatest free distance.

• Journal of Sensor Science and Technology
• /
• v.18 no.6
• /
• pp.423-431
• /
• 2009

Standard uroflowmetry measures the urine weight using single load cell to evaluate the urinary flow rate. Impact noise should be introduced due to gravity when the urine stream falls down into the container upon the load cell. The present study placed three load cells on the three vertices of a regular triangle and the three signals were ensemble averaged to enhance the signal-to-noise ratio(SNR) regardless of how the urination was made. Simulated urination experiment was performed with three different urine collection methods. In all three methods, SNR of the averaged signal was much higher than each load cell signals. With no urine collection device, the present signal averaging technique resulted in SNR values higher by 10~15 dB than when dual funnels or upper funnel were used to guide the urine stream. Therefore, it was demonstrated that the three point measurement followed by with ensemble averaging could enable accurate uroflowmetric test without any specially made urine collection devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2798-2804
• /
• 2010

The audio and image signal are corrupted by various noises in signal processing, many studies are being accomplished to restore those signals. In this paper, the algorithm is proposed to remove additive Gaussian noise and impulse noise at one dimension signal like an speech signal. The algorithm is composed to remove Gaussian noise after removing impulse noise. And the method using wavelet coefficient accumulation is used to remove the Gaussian noise, and the median filter based on element deviation is applied to remove the impulse noise. Also we compare existing methods using SNR(signal-to-noise ratio) as the standard of judgement of improvemental effect.

• Journal of Biomedical Engineering Research
• /
• v.23 no.2
• /
• pp.109-117
• /
• 2002

Electrogastrography(EGG) is a noninvasive method for measuring gastric electrical activity on the abdomen resulting from gastric muscle. EGG signals have a very low frequency range (0.0083 ~0.15 Hz) and extremely low amplitude(10~100 uV). Consequently, EGG signal is easily influenced by other noises. Both finite impulse response(FIR) and infinite impulse response (IIR) filters need high orders or have phase distortions for passing very narrow bandwidth of the EGG signal. In this study, we decomposed EGG signals using a wavelet multiresolution method with Daubechies mother wavelet. The EGG signals were decomposed to seven levels. We reconstructed signal by summing the decomposed signals from level four to seven. To evaluate the performance of the wavelet multiresolution filter(WMF) with simulated EGG signal using two kinds of FIR and four kinds of IIR filters., we used two indices; signal to noise ratio(SNR) and reconstruction squared error(RSE). The SNR of WMF had 9.5, 6.9, and 4.7 dB bigger than that of the other filters at different noise levels, respectively. Also, The RSE of WMF had $1.22{\times}10^6, 1.16{\times}10^6, 1.02{\times}10^6$ smaller than that of the other filters at different noise levels, respectively. The WMF performed better in the SNR and RSE than two kinds of FIR and four kinds of IIR filters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.47-58
• /
• 2011

MTI filter is used to separate target signal from clutter in many radar signal processing. By suppressing clutter before CFAR detection, the detection performance can be improved. As a radar system designed, a design engineer generally takes averaged SNR and CNR into account and does not include the effect of MTI filter's frequency response. In practice, when the signals including clutter are pass through the filter, SNR is widely varying according to target velocity and CNR is also varying according to clutter center frequency and spectrum spreading. In this paper, we have derived the relationship between the MTI filter's frequency response and a target's velocity and a clutter's spectrum characteristics. With the variation of SNR and CNR at the filter output, the detection performance of CFAR has been analyzed by the simulation and has made certain of their influences on the performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.865-875
• /
• 2012

In this paper, we optimize antenna locations for a distributed antenna system (DAS) with distributed antenna (DA) ports equipped with multiple antennas under per-DA port power constraint. Maximum ratio transmission and scaled zero-forcing beamforming are employed for single-user and multi-user DAS, respectively. Instead of maximizing the cell average ergodic sum rate, we focus on a lower bound of the expected signal-to-noise ratio (SNR) for the single-cell scenario and the expected signal-to-leakage ratio (SLR) for the two-cell scenario to determine antenna locations. For the single-cell case, optimization of the SNR criterion generates a closed form solution in comparison to conventional iterative algorithms. Also, a gradient ascent algorithm is proposed to solve the SLR criterion for the two-cell scenario. Simulation results show that DAS with antenna locations obtained from the proposed algorithms achieve capacity gains over traditional centralized antenna systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.962-977
• /
• 2019

The human voice is a convenient method of information transfer between different objects such as between men, men and machine, between machines. The development of information and communication technology, the voice has been able to transfer farther than before. The way to communicate, it is to convert the voice to another form, transmit it, and then reconvert it back to sound. In such a communication process, a vocoder is a method of converting and re-converting a voice and sound. The CELP (Code-Excited Linear Prediction) type vocoder, one of the voice codecs, is adapted as a standard codec since it provides high quality sound even though its transmission speed is relatively low. The EVRC (Enhanced Variable Rate CODEC) and QCELP (Qualcomm Code-Excited Linear Prediction), variable bit rate vocoders, are used for mobile phones in 3G environment. For the real-time implementation of a vocoder, the reduction of sound quality is a typical problem. To improve the sound quality, that is important to know the size and shape of noise. In the existing sound quality improvement method, the voice activated is detected or used, or statistical methods are used by the large mount of data. However, there is a disadvantage in that no noise can be detected, when there is a continuous signal or when a change in noise is large.This paper focused on finding a better way to decrease the reduction of sound quality in lower bit transmission environments. Based on simulation results, this study proposed a preprocessor application that estimates the SNR (Signal to Noise Ratio) using the spectral SNR estimation method. The SNR estimation method adopted the IMBE (Improved Multi-Band Excitation) instead of using the SNR, which is a continuous speech signal. Finally, this application improves the quality of the vocoder by enhancing sound quality adaptively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.2
• /
• pp.63-75
• /
• 1983

This paper has investigated and discussed the effects of multiple PSK signals upon an wideband FM signal in an intersystem interference environment between analog and digital radios. Using the derived approximate equation for the output haseband interference noise, the signal-to-interference noise power ratio(SNR) in the top channel baseband signal has been numerically calculated. The results are plotted in graphs as the functions of carrier-to-noise ratio(CNR), carrier-to interfer power ratio(CIR), and normalized carrier separation. From the results in this paper, one can know some optimu, or suitable, operating conditions(frequency allocation, bandwidth, and power, etc.) for an FM channel in the intersystemn interferences from digital PSK channels.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.103-113
• /
• 2015

This study presents a novel algorithm for determining the P-wave arrival time using amoving window function to improve source localization in low-SNR (signal-to-noise ratio)acoustic emissions. The proposed algorithm was applied to low-SNR signals to verify the accuracy of measurements against existing algorithms. When other algorithms were applied, the test results revealed that SNR decreased and accuracy was reduced, especially where SNR wasless than 2.14. The proposed algorithm using amoving window function considers the frequency characteristic and signal amplitude simultaneously, and produced reliable results where SNR was 2.14.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.323-330
• /
• 2007

Performance indicators such as output SNR, SIR, SINR for rectangular smart antennas in CDMA basestations have been derived. Simulations have been carried out to find the rectangular smart antenna performance while varying the input SNR, number of antenna elements, and the interferers' spatial distributions. Simplified Conjugate Gradient Method was chosen as the underlying beam forming algorithm. It has been shown that the performance of a rectangular smart antenna is similar to that of the linear one having the same number of elements when the interferers are randomly distributed over the whole azimuth angle range.