• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.23-30
• /
• 2016

Wake effects cause wind turbine generators (WTGs) within a wind power plant (WPP) to produce different levels of active power and subsequent reactive power capabilities. Further, the impedance between a WTG and the point of interconnection (POI)-which depends on the distance between them-impacts the WPP's reactive power injection capability at the POI. This paper proposes a voltage control scheme for a WPP based on the available reactive current of the doubly-fed induction generators (DFIGs) and its impacts on the POI to improve the reactive power injection capability of the WPP. In this paper, a design strategy for modifying the gain of DFIG controller is suggested and the comprehensive properties of these control gains are investigated. In the proposed scheme, the WPP controller, which operates in a voltage control mode, sends the command signal to the DFIGs based on the voltage difference at the POI. The DFIG controllers, which operate in a voltage control mode, employ a proportional controller with a limiter. The gain of the proportional controller is adjusted depending on the available reactive current of the DFIG and the series impedance between the DFIG and the POI. The performance of the proposed scheme is validated for various disturbances such as a reactive load connection and grid fault using an EMTP-RV simulator. Simulation results demonstrate that the proposed scheme promptly recovers the POI voltage by injecting more reactive power after a disturbance than the conventional scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.81-89
• /
• 2005

In this paper, we have described the implementation of a practical simulation tool to design and analyze communication networks. Especially, this study is focused on the implementation and application methods of a simulator supporting VoIP The key characteristics of this particular system are its easy and intuitive usage, the real behaviors implementation of equipment and protocols, the actual generation and transmission of traffic for simulation, supporting of VoIP and so forth. Our system is distinguished from the existing tools which define only the nature of voice traffic, process those packets in the same way as general data, and analyze only the quality of packet transmission such as delay. Our tool presented in this paper generates and processes packets in different way according to the types of traffic distinguishing call signal from voice information traffic. Also, we equipped this system with the various devices such as VoIP gateway and gatekeeper, which enabled this system to analyze the performance of devices and the quality of voice traffic transmission between PSTN and Internet. By presenting the implementation methods and application of this system, we managed to propose the utilization scheme of a simulation tool.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.47-53
• /
• 2011

The signal transmission properties of the connector such as insertion loss and return loss are investigated using analysis procedure of S-parameter simulation, equivalent model extraction, and characteristic impedance calculation. S-parameter simulation is performed by connector's modeling and solving based on 3-dimensional finite element method. The connector's equivalent model of ${\pi}$ type is are proposed and extracted with an optimization process of circuit analysis simulator. The characteristic impedance of the connector is calculated with results of circuit analysis simulation and S-parameter data. According to the connector's characteristic impedance, it's revised design is carried out. In this work, the connector's effective contact area is increased and its body is applied as a high dielectric material in order to increase its capacitance and then obtain impedance matching. Therefore, return loss of the connector is improved by approximately 10 dB due to its design revision.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.26-33
• /
• 2009

The directions of the road are divided into two, the right-hand side and left-hand side of the road, by the convention and specific native method in the world. This paper deals with the characteristics and behaviors of drivers who are accustomed to driving on right-hand side of the road, drive with a handle on the left-hand side, and comparing with left-hand side drivers. The driver's eye movements were measured by eye camera and questionnaires were used for measuring subjective evaluation such as driving mental workload. The experimental results indicated even if the experts who had much experience on right-hand side driving, they had lower driving skill than novice driver, accustomed to driving on left-hand side. In terms of mental workload, MCH rating scale and MNASA-TLX, the right-hand side drivers were in lower stress condition than the left-hand side drivers because of having much driving experience. However, they conducted a few mistakes by confusing the position of turn signal and windshield wiper because of their driving habit or traits and it lead to operation mistakes. These results can be applied effectively to develop the driving support information with changed environments.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.235-240
• /
• 2007

A ceramic stem based TO package incorporating a coplanar waveguide feed-line has been proposed allowing for 10 Gbps grade data transmission. The frequency response of a cylindrical feed-line fer a conventional metal based TO package was first analyzed, and compared with that of the CPW feed-line used for a ceramic based package such as a butterfly package. For the case where a DFB LD chip is packaged to an LD module, the measured 3 dB frequency bandwidths for the conventional and proposed packages were 3.5 GHz and 7.8 GHz respectively, which agree well with the theoretical results obtained from the modeling based on the small signal equivalent circuits. Consequently, we proposed a novel ceramic based TO package with a CPW feed-line in ceramic material as a stem to improve the frequency characteristics of the conventional one. And, its performance was theoretically observed to confirm that the proposed package provides even wider frequency bandwidth compared to the conventional one.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.73-80
• /
• 2007

In conventional on-demand mobile ad hoc routing algorithms, an alternate path is sought only after an active path is broken. It incurs a significant cost in terms of money and time in detecting the disconnection and establishing a new route. In this thesis, we propose proactive route selection and maintenance to conventional mobile ad hoc on-demand routing algorithms. The key idea for this research is to only consider a path break to be likely when the signal power of a received packet drops below an optimal threshold value and to generate a forewarning packet. In other words, if a path is lost with high probability, the neighboring node that may easily be cut off notifies the source node by sending a forewarning packet. Then the source node can initiate route discovery early and switched to a reliable path potentially avoiding the disconnection altogether. For the simulational study, network simulator(NS2) is used. The result of simulation shows that the algorithm significantly improves the performance of networks comparing to conventional on-demand routing protocols based on DSR and AODV in terms of packet delivery ratio, packet latency and routing overhead.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.475-483
• /
• 2015

We propose a numerical scheme to simulate the time-domain echo signals at tracking radar for a realistic scenario where an EAD (expendable active decoy) and an airborne target are both in dynamic states. On various scenarios where the target takes different maneuvers, the trajectories of the EAD ejected from the target are accurately calculated by solving 6-DOF (Degree-of-Freedom) equations of the motion for the EAD. At each sampling time of the echo signal, the locations of the EAD and the target are assumed to be fixed. Thus, the echo power from the EAD can be simply calculated by using the Friis transmission formula. The returned power from the target can be computed based on the pre-calculated scattering matrix of the target. In this paper, an IPO (iterative physical optics) method is used to construct the scattering matrix database of the target. The sinc function-interpolation formulation (sampling theorem) is applied to compute the scattering at any incidence angle from the database. A simulator is developed based on the proposed scheme to estimate the echo signals, which can consider the movement of the airborne target and EAD, also the scattering of the target and the RF specifications of the EAD. For applications, we consider the detection probability of the target in the presence of the EAD based on Monte Carlo simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.702-721
• /
• 2012

In the DVB-T2 system with a multiple-input single-output (MISO) transmission mode, Alamouti coded orthogonal frequency division multiplexing (OFDM) signals are transmitted simultaneously from two spatially separated transmitters in a single frequency network (SFN). In such systems, each transmit-receive link may have a distinct carrier frequency offset (CFO) due to the Doppler shift and/or frequency mismatch between the local oscillators. Thus, the received signal experiences dual CFOs. This not only causes dual phase errors in desired data but also introduces inter-carrier interference (ICI), which cannot be removed completely by simply performing a CFO compensation. To overcome this problem, this paper proposes an iterative detection with dual phase errors compensation technique. In addition, we propose a successive-iterative ICI cancellation technique. This technique successively eliminates ICI in the initial iteration by exploiting pre-detected data pairs. Then, in subsequent iterations, it performs a fine interference cancellation using a priori information, iteratively fed back from the channel decoder. In contrast to previous works, the proposed techniques do not require estimates of dual CFOs. Their performances are evaluated via a full DVB-T2 simulator. Simulation results show that the DVB-T2 receiver equipped with the proposed dual phase errors compensation and the successive-iterative ICI cancellation techniques achieves almost the same performance as ideal dual CFOs-free systems, even for large dual CFOs.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.87-95
• /
• 2008

Ladar (Laser Detection And Ranging, Lidar) is a sensor to acquire precise distances to the surfaces of target region using laser signals, which can be suitably applied to ATD (Automatic Target Detection) for guided missiles or aerial vehicles recently. It provides a range image in which each measured distance is expressed as the brightness of the corresponding pixel. Since the precise 3D models can be generated from the Ladar range image, more robust identification and recognition of the targets can be possible. If we simulate the data of Ladar sensor, we can efficiently use this simulator to design and develop Ladar sensors and systems and to develop the data processing algorithm. The purposes of this study are thus to simulate the signals of a Ladar sensor based on linear frequency modulation and to create range images from the simulated Ladar signals. We first simulated the laser signals of a Ladar using FM chirp modulator and then computed the distances from the sensor to a target using the FFT process of the simulated signals. Finally, we created the range image using the distances set.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.857-864
• /
• 1998

The infuluence of Doppler effects on the tracking performance of a noncoherent second-order delay locked loop (DLL) operating on a data modulated signal is investigated. For the perfoermance analysis we consider the tracking accuracy (steady state error and jitter) of the linear DLL and the reliability of the nonlinear loop. The nonlinear analysis concerning the loop reliability makes use of an asympototic expansion for the MTLL(mean time to lose lock) which has been derived by applying the singular perturbation method. In particular, we give optimal loop parameters and the optimal bandwidth of the bandpass filter in the loop arms to achieve a maximum MTLL. Since Doppler effects can be producesd comparatively in LEO system, we can espect the more reliable DLL loop design. by using the results of the circuit simulation, the delay lock loop is synthesized in FPGA, and verified to get the GPS data from the STR-2770 GPS simulator system. So, the synthesized logic circuit is shown be accurately performed.